From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Dong Xu Wang <wdongxu@linux.vnet.ibm.com>,
Chunyan Liu <cyliu@suse.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 21/39] gluster.c: replace QEMUOptionParameter with QemuOpts
Date: Mon, 16 Jun 2014 19:23:45 +0800 [thread overview]
Message-ID: <1402917843-6459-22-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1402917843-6459-1-git-send-email-stefanha@redhat.com>
From: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/gluster.c | 81 ++++++++++++++++++++++++++++++---------------------------
1 file changed, 42 insertions(+), 39 deletions(-)
diff --git a/block/gluster.c b/block/gluster.c
index 114689e..5ff282b 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -478,13 +478,14 @@ static inline int qemu_gluster_zerofill(struct glfs_fd *fd, int64_t offset,
#endif
static int qemu_gluster_create(const char *filename,
- QEMUOptionParameter *options, Error **errp)
+ QemuOpts *opts, Error **errp)
{
struct glfs *glfs;
struct glfs_fd *fd;
int ret = 0;
int prealloc = 0;
int64_t total_size = 0;
+ char *tmp = NULL;
GlusterConf *gconf = g_malloc0(sizeof(GlusterConf));
glfs = qemu_gluster_init(gconf, filename, errp);
@@ -493,24 +494,21 @@ static int qemu_gluster_create(const char *filename,
goto out;
}
- while (options && options->name) {
- if (!strcmp(options->name, BLOCK_OPT_SIZE)) {
- total_size = options->value.n / BDRV_SECTOR_SIZE;
- } else if (!strcmp(options->name, BLOCK_OPT_PREALLOC)) {
- if (!options->value.s || !strcmp(options->value.s, "off")) {
- prealloc = 0;
- } else if (!strcmp(options->value.s, "full") &&
- gluster_supports_zerofill()) {
- prealloc = 1;
- } else {
- error_setg(errp, "Invalid preallocation mode: '%s'"
- " or GlusterFS doesn't support zerofill API",
- options->value.s);
- ret = -EINVAL;
- goto out;
- }
- }
- options++;
+ total_size =
+ qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0) / BDRV_SECTOR_SIZE;
+
+ tmp = qemu_opt_get_del(opts, BLOCK_OPT_PREALLOC);
+ if (!tmp || !strcmp(tmp, "off")) {
+ prealloc = 0;
+ } else if (!strcmp(tmp, "full") &&
+ gluster_supports_zerofill()) {
+ prealloc = 1;
+ } else {
+ error_setg(errp, "Invalid preallocation mode: '%s'"
+ " or GlusterFS doesn't support zerofill API",
+ tmp);
+ ret = -EINVAL;
+ goto out;
}
fd = glfs_creat(glfs, gconf->image,
@@ -532,6 +530,7 @@ static int qemu_gluster_create(const char *filename,
}
}
out:
+ g_free(tmp);
qemu_gluster_gconf_free(gconf);
if (glfs) {
glfs_fini(glfs);
@@ -698,18 +697,22 @@ static int qemu_gluster_has_zero_init(BlockDriverState *bs)
return 0;
}
-static QEMUOptionParameter qemu_gluster_create_options[] = {
- {
- .name = BLOCK_OPT_SIZE,
- .type = OPT_SIZE,
- .help = "Virtual disk size"
- },
- {
- .name = BLOCK_OPT_PREALLOC,
- .type = OPT_STRING,
- .help = "Preallocation mode (allowed values: off, full)"
- },
- { NULL }
+static QemuOptsList qemu_gluster_create_opts = {
+ .name = "qemu-gluster-create-opts",
+ .head = QTAILQ_HEAD_INITIALIZER(qemu_gluster_create_opts.head),
+ .desc = {
+ {
+ .name = BLOCK_OPT_SIZE,
+ .type = QEMU_OPT_SIZE,
+ .help = "Virtual disk size"
+ },
+ {
+ .name = BLOCK_OPT_PREALLOC,
+ .type = QEMU_OPT_STRING,
+ .help = "Preallocation mode (allowed values: off, full)"
+ },
+ { /* end of list */ }
+ }
};
static BlockDriver bdrv_gluster = {
@@ -722,7 +725,7 @@ static BlockDriver bdrv_gluster = {
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
.bdrv_close = qemu_gluster_close,
- .bdrv_create = qemu_gluster_create,
+ .bdrv_create2 = qemu_gluster_create,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
@@ -736,7 +739,7 @@ static BlockDriver bdrv_gluster = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
- .create_options = qemu_gluster_create_options,
+ .create_opts = &qemu_gluster_create_opts,
};
static BlockDriver bdrv_gluster_tcp = {
@@ -749,7 +752,7 @@ static BlockDriver bdrv_gluster_tcp = {
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
.bdrv_close = qemu_gluster_close,
- .bdrv_create = qemu_gluster_create,
+ .bdrv_create2 = qemu_gluster_create,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
@@ -763,7 +766,7 @@ static BlockDriver bdrv_gluster_tcp = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
- .create_options = qemu_gluster_create_options,
+ .create_opts = &qemu_gluster_create_opts,
};
static BlockDriver bdrv_gluster_unix = {
@@ -776,7 +779,7 @@ static BlockDriver bdrv_gluster_unix = {
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
.bdrv_close = qemu_gluster_close,
- .bdrv_create = qemu_gluster_create,
+ .bdrv_create2 = qemu_gluster_create,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
@@ -790,7 +793,7 @@ static BlockDriver bdrv_gluster_unix = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
- .create_options = qemu_gluster_create_options,
+ .create_opts = &qemu_gluster_create_opts,
};
static BlockDriver bdrv_gluster_rdma = {
@@ -803,7 +806,7 @@ static BlockDriver bdrv_gluster_rdma = {
.bdrv_reopen_commit = qemu_gluster_reopen_commit,
.bdrv_reopen_abort = qemu_gluster_reopen_abort,
.bdrv_close = qemu_gluster_close,
- .bdrv_create = qemu_gluster_create,
+ .bdrv_create2 = qemu_gluster_create,
.bdrv_getlength = qemu_gluster_getlength,
.bdrv_get_allocated_file_size = qemu_gluster_allocated_file_size,
.bdrv_truncate = qemu_gluster_truncate,
@@ -817,7 +820,7 @@ static BlockDriver bdrv_gluster_rdma = {
#ifdef CONFIG_GLUSTERFS_ZEROFILL
.bdrv_co_write_zeroes = qemu_gluster_co_write_zeroes,
#endif
- .create_options = qemu_gluster_create_options,
+ .create_opts = &qemu_gluster_create_opts,
};
static void bdrv_gluster_init(void)
--
1.9.3
next prev parent reply other threads:[~2014-06-16 11:26 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-16 11:23 [Qemu-devel] [PULL 00/39] Block patches Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 01/39] configure: Enable dead code (lzo, snappy, quorum) Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 02/39] block: Drop superfluous conditionals around g_free() Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 03/39] blockdev: Move 'serial' option to drive_init() Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 04/39] blockdev: Rename drive_init(), drive_uninit() to drive_new(), drive_del() Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 05/39] blockdev: Remove unused DriveInfo reference count Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 06/39] block/nfs: fix potential segfault on early callback Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 07/39] QemuOpts: move find_desc_by_name ahead for later calling Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 08/39] QemuOpts: repurpose qemu_opts_print to replace print_option_parameters Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 09/39] QemuOpts: add def_value_str to QemuOptDesc Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 10/39] qapi: output def_value_str when query command line options Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 11/39] QemuOpts: change opt->name|str from (const char *) to (char *) Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 12/39] QemuOpts: move qemu_opt_del ahead for later calling Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 13/39] QemuOpts: add qemu_opt_get_*_del functions for replace work Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 14/39] QemuOpts: add qemu_opts_print_help to replace print_option_help Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 15/39] QemuOpts: add conversion between QEMUOptionParameter to QemuOpts Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 16/39] QemuOpts: add qemu_opts_append to replace append_option_parameters Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 17/39] QemuOpts: check NULL input for qemu_opts_del Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 18/39] change block layer to support both QemuOpts and QEMUOptionParamter Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 19/39] vvfat.c: handle cross_driver's create_options and create_opts Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 20/39] cow.c: replace QEMUOptionParameter with QemuOpts Stefan Hajnoczi
2014-06-30 17:52 ` Peter Maydell
2014-06-16 11:23 ` Stefan Hajnoczi [this message]
2014-06-16 11:23 ` [Qemu-devel] [PULL 22/39] iscsi.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 23/39] nfs.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 24/39] qcow.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 25/39] QemuOpts: export qemu_opt_find Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 26/39] qcow2.c: replace QEMUOptionParameter with QemuOpts Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 27/39] qed.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 28/39] raw-posix.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 29/39] raw-win32.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 30/39] raw_bsd.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 31/39] rbd.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 32/39] sheepdog.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 33/39] ssh.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 34/39] vdi.c: " Stefan Hajnoczi
2014-06-16 11:23 ` [Qemu-devel] [PULL 35/39] vhdx.c: " Stefan Hajnoczi
2014-06-16 11:24 ` [Qemu-devel] [PULL 36/39] vmdk.c: " Stefan Hajnoczi
2014-06-16 11:24 ` [Qemu-devel] [PULL 37/39] vpc.c: " Stefan Hajnoczi
2014-06-16 11:24 ` [Qemu-devel] [PULL 38/39] cleanup QEMUOptionParameter Stefan Hajnoczi
2014-06-16 11:24 ` [Qemu-devel] [PULL 39/39] QemuOpts: cleanup tmp 'allocated' member from QemuOptsList Stefan Hajnoczi
2014-06-16 13:30 ` [Qemu-devel] [PULL 00/39] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402917843-6459-22-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=cyliu@suse.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=wdongxu@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).