qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 5/6] vl: allow other threads to do qemu_system_vmstop_request
Date: Mon, 23 Jun 2014 17:31:18 +0800	[thread overview]
Message-ID: <1403515879-14359-6-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1403515879-14359-1-git-send-email-stefanha@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

There patch protects vmstop_requested with a lock and introduces
qemu_system_vmstop_request_prepare.

Together with the new call to qemu_vmstop_requested in vm_start,
qemu_system_vmstop_request_prepare avoids a race where the VM could remain
stopped even though the iostatus of a block device has already been set
(for example).

qemu_system_vmstop_request_prepare however also lets the caller thread
delay observation of the state change until it has itself communicated
that change to the user.  This delay avoids any possibility of a wrong
reordering of the BLOCK_IO_ERROR event and the subsequent STOP event.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 cpus.c                  |  1 +
 include/sysemu/sysemu.h |  1 +
 target-lm32/op_helper.c |  2 +-
 vl.c                    | 85 +++++++++++++++++++++++++++++++------------------
 4 files changed, 57 insertions(+), 32 deletions(-)

diff --git a/cpus.c b/cpus.c
index 1ec3a9e..06da4e7 100644
--- a/cpus.c
+++ b/cpus.c
@@ -1206,6 +1206,7 @@ void cpu_stop_current(void)
 int vm_stop(RunState state)
 {
     if (qemu_in_vcpu_thread()) {
+        qemu_system_vmstop_request_prepare();
         qemu_system_vmstop_request(state);
         /*
          * FIXME: should not return to device code in case
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index 277230d..6b4cc13 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -62,6 +62,7 @@ void qemu_system_powerdown_request(void);
 void qemu_register_powerdown_notifier(Notifier *notifier);
 void qemu_system_debug_request(void);
 void qemu_system_vmstop_request(RunState reason);
+void qemu_system_vmstop_request_prepare(void);
 int qemu_shutdown_requested_get(void);
 int qemu_reset_requested_get(void);
 void qemu_system_killed(int signal, pid_t pid);
diff --git a/target-lm32/op_helper.c b/target-lm32/op_helper.c
index 308742a..61209c1 100644
--- a/target-lm32/op_helper.c
+++ b/target-lm32/op_helper.c
@@ -42,7 +42,7 @@ void HELPER(ill)(CPULM32State *env)
     fprintf(stderr, "VM paused due to illegal instruction. "
             "Connect a debugger or switch to the monitor console "
             "to find out more.\n");
-    qemu_system_vmstop_request(RUN_STATE_PAUSED);
+    vm_stop(RUN_STATE_PAUSED);
     cs->halted = 1;
     raise_exception(env, EXCP_HALTED);
 #endif
diff --git a/vl.c b/vl.c
index 54b4627..ab8f152 100644
--- a/vl.c
+++ b/vl.c
@@ -574,6 +574,10 @@ static int default_driver_check(QemuOpts *opts, void *opaque)
 
 static RunState current_run_state = RUN_STATE_PRELAUNCH;
 
+/* We use RUN_STATE_MAX but any invalid value will do */
+static RunState vmstop_requested = RUN_STATE_MAX;
+static QemuMutex vmstop_lock;
+
 typedef struct {
     RunState from;
     RunState to;
@@ -650,10 +654,11 @@ static void runstate_init(void)
     const RunStateTransition *p;
 
     memset(&runstate_valid_transitions, 0, sizeof(runstate_valid_transitions));
-
     for (p = &runstate_transitions_def[0]; p->from != RUN_STATE_MAX; p++) {
         runstate_valid_transitions[p->from][p->to] = true;
     }
+
+    qemu_mutex_init(&vmstop_lock);
 }
 
 /* This function will abort() on invalid state transitions */
@@ -693,6 +698,54 @@ StatusInfo *qmp_query_status(Error **errp)
     return info;
 }
 
+static bool qemu_vmstop_requested(RunState *r)
+{
+    qemu_mutex_lock(&vmstop_lock);
+    *r = vmstop_requested;
+    vmstop_requested = RUN_STATE_MAX;
+    qemu_mutex_unlock(&vmstop_lock);
+    return *r < RUN_STATE_MAX;
+}
+
+void qemu_system_vmstop_request_prepare(void)
+{
+    qemu_mutex_lock(&vmstop_lock);
+}
+
+void qemu_system_vmstop_request(RunState state)
+{
+    vmstop_requested = state;
+    qemu_mutex_unlock(&vmstop_lock);
+    qemu_notify_event();
+}
+
+void vm_start(void)
+{
+    RunState requested;
+
+    qemu_vmstop_requested(&requested);
+    if (runstate_is_running() && requested == RUN_STATE_MAX) {
+        return;
+    }
+
+    /* Ensure that a STOP/RESUME pair of events is emitted if a
+     * vmstop request was pending.  The BLOCK_IO_ERROR event, for
+     * example, according to documentation is always followed by
+     * the STOP event.
+     */
+    if (runstate_is_running()) {
+        monitor_protocol_event(QEVENT_STOP, NULL);
+    } else {
+        cpu_enable_ticks();
+        runstate_set(RUN_STATE_RUNNING);
+        vm_state_notify(1, RUN_STATE_RUNNING);
+        resume_all_vcpus();
+    }
+
+    monitor_protocol_event(QEVENT_RESUME, NULL);
+}
+
+
 /***********************************************************/
 /* real time host monotonic timer */
 
@@ -1658,17 +1711,6 @@ void vm_state_notify(int running, RunState state)
     }
 }
 
-void vm_start(void)
-{
-    if (!runstate_is_running()) {
-        cpu_enable_ticks();
-        runstate_set(RUN_STATE_RUNNING);
-        vm_state_notify(1, RUN_STATE_RUNNING);
-        resume_all_vcpus();
-        monitor_protocol_event(QEVENT_RESUME, NULL);
-    }
-}
-
 /* reset/shutdown handler */
 
 typedef struct QEMUResetEntry {
@@ -1693,7 +1735,6 @@ static NotifierList suspend_notifiers =
 static NotifierList wakeup_notifiers =
     NOTIFIER_LIST_INITIALIZER(wakeup_notifiers);
 static uint32_t wakeup_reason_mask = ~(1 << QEMU_WAKEUP_REASON_NONE);
-static RunState vmstop_requested = RUN_STATE_MAX;
 
 int qemu_shutdown_requested_get(void)
 {
@@ -1761,18 +1802,6 @@ static int qemu_debug_requested(void)
     return r;
 }
 
-/* We use RUN_STATE_MAX but any invalid value will do */
-static bool qemu_vmstop_requested(RunState *r)
-{
-    if (vmstop_requested < RUN_STATE_MAX) {
-        *r = vmstop_requested;
-        vmstop_requested = RUN_STATE_MAX;
-        return true;
-    }
-
-    return false;
-}
-
 void qemu_register_reset(QEMUResetHandler *func, void *opaque)
 {
     QEMUResetEntry *re = g_malloc0(sizeof(QEMUResetEntry));
@@ -1922,12 +1951,6 @@ void qemu_system_debug_request(void)
     qemu_notify_event();
 }
 
-void qemu_system_vmstop_request(RunState state)
-{
-    vmstop_requested = state;
-    qemu_notify_event();
-}
-
 static bool main_loop_should_exit(void)
 {
     RunState r;
-- 
1.9.3

  parent reply	other threads:[~2014-06-23  9:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-23  9:31 [Qemu-devel] [PULL 0/6] Block patches Stefan Hajnoczi
2014-06-23  9:31 ` [Qemu-devel] [PULL 1/6] block: m25p80: sync_page(): Deindent function body Stefan Hajnoczi
2014-06-23  9:31 ` [Qemu-devel] [PULL 2/6] block: m25p80: Support read only bdrvs Stefan Hajnoczi
2014-06-23  9:31 ` [Qemu-devel] [PULL 3/6] QemuOpts: check NULL opts in qemu_opt_get functions Stefan Hajnoczi
2014-06-23  9:31 ` [Qemu-devel] [PULL 4/6] sheepdog: fix NULL dereference in sd_create Stefan Hajnoczi
2014-06-23  9:31 ` Stefan Hajnoczi [this message]
2014-06-23  9:31 ` [Qemu-devel] [PULL 6/6] block: asynchronously stop the VM on I/O errors Stefan Hajnoczi
2014-06-23 12:18 ` [Qemu-devel] [PULL 0/6] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403515879-14359-6-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).