qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Michael S. Tsirkin" <mst@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	xen-devel@lists.xensource.com,
	"Stefano Stabellini" <stefano.stabellini@eu.citrix.com>,
	"Alexander Graf" <agraf@suse.de>,
	"Don Slutz" <dslutz@verizon.com>,
	"Anthony Liguori" <aliguori@amazon.com>,
	"Anthony PERARD" <anthony.perard@citrix.com>,
	=?UTF-8?q?Andreas=20F=C3=A4rber?= <afaerber@suse.de>
Subject: [Qemu-devel] [PULL 21/23] xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
Date: Mon, 23 Jun 2014 18:54:17 +0300	[thread overview]
Message-ID: <1403538745-18622-22-git-send-email-mst@redhat.com> (raw)
In-Reply-To: <1403538745-18622-1-git-send-email-mst@redhat.com>

From: Don Slutz <dslutz@verizon.com>

This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Don Slutz <dslutz@verizon.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
 include/hw/xen/xen.h |  3 ++-
 hw/i386/pc_piix.c    | 31 ++++++++++++++++---------------
 hw/i386/pc_q35.c     | 29 +++++++++++++++--------------
 xen-hvm-stub.c       |  3 ++-
 xen-hvm.c            | 24 ++++++++++++++----------
 5 files changed, 49 insertions(+), 41 deletions(-)

diff --git a/include/hw/xen/xen.h b/include/hw/xen/xen.h
index 85fda3d..f71f2d8 100644
--- a/include/hw/xen/xen.h
+++ b/include/hw/xen/xen.h
@@ -37,10 +37,11 @@ void xen_cmos_set_s3_resume(void *opaque, int irq, int level);
 qemu_irq *xen_interrupt_controller_init(void);
 
 int xen_init(MachineClass *mc);
-int xen_hvm_init(MemoryRegion **ram_memory);
 void xenstore_store_pv_console_info(int i, struct CharDriverState *chr);
 
 #if defined(NEED_CPU_H) && !defined(CONFIG_USER_ONLY)
+int xen_hvm_init(ram_addr_t *below_4g_mem_size, ram_addr_t *above_4g_mem_size,
+                 MemoryRegion **ram_memory);
 void xen_ram_alloc(ram_addr_t ram_addr, ram_addr_t size,
                    struct MemoryRegion *mr);
 void xen_modified_memory(ram_addr_t start, ram_addr_t length);
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index 3e7524b..60057f9 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -99,21 +99,6 @@ static void pc_init1(MachineState *machine,
     FWCfgState *fw_cfg = NULL;
     PcGuestInfo *guest_info;
 
-    if (xen_enabled() && xen_hvm_init(&ram_memory) != 0) {
-        fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
-        exit(1);
-    }
-
-    icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
-    object_property_add_child(qdev_get_machine(), "icc-bridge",
-                              OBJECT(icc_bridge), NULL);
-
-    pc_cpus_init(machine->cpu_model, icc_bridge);
-
-    if (kvm_enabled() && kvmclock_enabled) {
-        kvmclock_create();
-    }
-
     /* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory).
      * If it doesn't, we need to split it in chunks below and above 4G.
      * In any case, try to make sure that guest addresses aligned at
@@ -130,6 +115,22 @@ static void pc_init1(MachineState *machine,
         below_4g_mem_size = machine->ram_size;
     }
 
+    if (xen_enabled() && xen_hvm_init(&below_4g_mem_size, &above_4g_mem_size,
+                                      &ram_memory) != 0) {
+        fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
+        exit(1);
+    }
+
+    icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
+    object_property_add_child(qdev_get_machine(), "icc-bridge",
+                              OBJECT(icc_bridge), NULL);
+
+    pc_cpus_init(machine->cpu_model, icc_bridge);
+
+    if (kvm_enabled() && kvmclock_enabled) {
+        kvmclock_create();
+    }
+
     if (pci_enabled) {
         pci_memory = g_new(MemoryRegion, 1);
         memory_region_init(pci_memory, NULL, "pci", UINT64_MAX);
diff --git a/hw/i386/pc_q35.c b/hw/i386/pc_q35.c
index 3fe3abe..da5fd53 100644
--- a/hw/i386/pc_q35.c
+++ b/hw/i386/pc_q35.c
@@ -86,20 +86,6 @@ static void pc_q35_init(MachineState *machine)
     DeviceState *icc_bridge;
     PcGuestInfo *guest_info;
 
-    if (xen_enabled() && xen_hvm_init(&ram_memory) != 0) {
-        fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
-        exit(1);
-    }
-
-    icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
-    object_property_add_child(qdev_get_machine(), "icc-bridge",
-                              OBJECT(icc_bridge), NULL);
-
-    pc_cpus_init(machine->cpu_model, icc_bridge);
-    pc_acpi_init("q35-acpi-dsdt.aml");
-
-    kvmclock_create();
-
     /* Check whether RAM fits below 4G (leaving 1/2 GByte for IO memory
      * and 256 Mbytes for PCI Express Enhanced Configuration Access Mapping
      * also known as MMCFG).
@@ -118,6 +104,21 @@ static void pc_q35_init(MachineState *machine)
         below_4g_mem_size = machine->ram_size;
     }
 
+    if (xen_enabled() && xen_hvm_init(&below_4g_mem_size, &above_4g_mem_size,
+                                      &ram_memory) != 0) {
+        fprintf(stderr, "xen hardware virtual machine initialisation failed\n");
+        exit(1);
+    }
+
+    icc_bridge = qdev_create(NULL, TYPE_ICC_BRIDGE);
+    object_property_add_child(qdev_get_machine(), "icc-bridge",
+                              OBJECT(icc_bridge), NULL);
+
+    pc_cpus_init(machine->cpu_model, icc_bridge);
+    pc_acpi_init("q35-acpi-dsdt.aml");
+
+    kvmclock_create();
+
     /* pci enabled */
     if (pci_enabled) {
         pci_memory = g_new(MemoryRegion, 1);
diff --git a/xen-hvm-stub.c b/xen-hvm-stub.c
index 4eb27b5..2d98696 100644
--- a/xen-hvm-stub.c
+++ b/xen-hvm-stub.c
@@ -51,7 +51,8 @@ void xen_modified_memory(ram_addr_t start, ram_addr_t length)
 {
 }
 
-int xen_hvm_init(MemoryRegion **ram_memory)
+int xen_hvm_init(ram_addr_t *below_4g_mem_size, ram_addr_t *above_4g_mem_size,
+                 MemoryRegion **ram_memory)
 {
     return 0;
 }
diff --git a/xen-hvm.c b/xen-hvm.c
index aac38ef..5bcebdd 100644
--- a/xen-hvm.c
+++ b/xen-hvm.c
@@ -155,10 +155,11 @@ qemu_irq *xen_interrupt_controller_init(void)
 
 /* Memory Ops */
 
-static void xen_ram_init(ram_addr_t ram_size, MemoryRegion **ram_memory_p)
+static void xen_ram_init(ram_addr_t *below_4g_mem_size,
+                         ram_addr_t *above_4g_mem_size,
+                         ram_addr_t ram_size, MemoryRegion **ram_memory_p)
 {
     MemoryRegion *sysmem = get_system_memory();
-    ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
     ram_addr_t block_len;
 
     block_len = ram_size;
@@ -173,10 +174,11 @@ static void xen_ram_init(ram_addr_t ram_size, MemoryRegion **ram_memory_p)
     vmstate_register_ram_global(&ram_memory);
 
     if (ram_size >= HVM_BELOW_4G_RAM_END) {
-        above_4g_mem_size = ram_size - HVM_BELOW_4G_RAM_END;
-        below_4g_mem_size = HVM_BELOW_4G_RAM_END;
+        *above_4g_mem_size = ram_size - HVM_BELOW_4G_RAM_END;
+        *below_4g_mem_size = HVM_BELOW_4G_RAM_END;
     } else {
-        below_4g_mem_size = ram_size;
+        *above_4g_mem_size = 0;
+        *below_4g_mem_size = ram_size;
     }
 
     memory_region_init_alias(&ram_640k, NULL, "xen.ram.640k",
@@ -189,12 +191,13 @@ static void xen_ram_init(ram_addr_t ram_size, MemoryRegion **ram_memory_p)
      * the Options ROM, so it is registered here as RAM.
      */
     memory_region_init_alias(&ram_lo, NULL, "xen.ram.lo",
-                             &ram_memory, 0xc0000, below_4g_mem_size - 0xc0000);
+                             &ram_memory, 0xc0000,
+                             *below_4g_mem_size - 0xc0000);
     memory_region_add_subregion(sysmem, 0xc0000, &ram_lo);
-    if (above_4g_mem_size > 0) {
+    if (*above_4g_mem_size > 0) {
         memory_region_init_alias(&ram_hi, NULL, "xen.ram.hi",
                                  &ram_memory, 0x100000000ULL,
-                                 above_4g_mem_size);
+                                 *above_4g_mem_size);
         memory_region_add_subregion(sysmem, 0x100000000ULL, &ram_hi);
     }
 }
@@ -958,7 +961,8 @@ static void xen_wakeup_notifier(Notifier *notifier, void *data)
     xc_set_hvm_param(xen_xc, xen_domid, HVM_PARAM_ACPI_S_STATE, 0);
 }
 
-int xen_hvm_init(MemoryRegion **ram_memory)
+int xen_hvm_init(ram_addr_t *below_4g_mem_size, ram_addr_t *above_4g_mem_size,
+                 MemoryRegion **ram_memory)
 {
     int i, rc;
     unsigned long ioreq_pfn;
@@ -1036,7 +1040,7 @@ int xen_hvm_init(MemoryRegion **ram_memory)
 
     /* Init RAM management */
     xen_map_cache_init(xen_phys_offset_to_gaddr, state);
-    xen_ram_init(ram_size, ram_memory);
+    xen_ram_init(below_4g_mem_size, above_4g_mem_size, ram_size, ram_memory);
 
     qemu_add_vm_change_state_handler(xen_hvm_change_state_handler, state);
 
-- 
MST

  parent reply	other threads:[~2014-06-23 15:54 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-23 15:53 [Qemu-devel] [PULL 00/23] pc,pci,vhost,net fixes, enhancements Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 01/23] vhost: block migration if backend does not log memory Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 02/23] vhost: fix resource leak in error handling Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 03/23] qapi/hmp: use 'backend' instead of 'device' with memory backend Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 04/23] libqemustub: add more stubs for qemu-char Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 05/23] qtest: fix qtest for vhost-user Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 06/23] qtest: fix vhost-user-test unbalanced mutex locks Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 07/23] e1000: emulate auto-negotiation during external link status change Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 08/23] e1000: improve auto-negotiation reporting via mii-tool Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 09/23] e1000: signal guest on successful link auto-negotiation Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 10/23] e1000: move e1000_autoneg_timer() to after set_ics() Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 11/23] e1000: factor out checking for auto-negotiation availability Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 12/23] qapi/string-output-visitor: fix human output Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 13/23] qemu-char: fix qemu_chr_fe_get_msgfd() Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 14/23] qemu-char: avoid leaking unused fds in tcp_get_msgfds() Michael S. Tsirkin
2014-06-23 15:53 ` [Qemu-devel] [PULL 15/23] virtio-pci: Report an error when msix vectors init fails Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 16/23] q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 17/23] hw/pcie: correct debug message Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 18/23] hw/pcie: implement power controller functionality Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 19/23] hw/pcie: better hotplug/hotunplug support Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 20/23] pcie: coding style tweak Michael S. Tsirkin
2014-06-23 15:54 ` Michael S. Tsirkin [this message]
2014-06-23 15:54 ` [Qemu-devel] [PULL 22/23] pc & q35: Add new machine opt max-ram-below-4g Michael S. Tsirkin
2014-06-23 15:54 ` [Qemu-devel] [PULL 23/23] xen-hvm: Handle " Michael S. Tsirkin
2014-06-24 11:21 ` [Qemu-devel] [PULL 00/23] pc,pci,vhost,net fixes, enhancements Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1403538745-18622-22-git-send-email-mst@redhat.com \
    --to=mst@redhat.com \
    --cc=afaerber@suse.de \
    --cc=agraf@suse.de \
    --cc=aliguori@amazon.com \
    --cc=anthony.perard@citrix.com \
    --cc=dslutz@verizon.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefano.stabellini@eu.citrix.com \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).