From: Eduardo Habkost <ehabkost@redhat.com>
To: qemu-devel@nongnu.org, "Michael S. Tsirkin" <mst@redhat.com>
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
"Marcel Apfelbaum" <marcel.a@redhat.com>,
"Alexey Kardashevskiy" <aik@ozlabs.ru>,
"Markus Armbruster" <armbru@redhat.com>,
"Paul Mackerras" <paulus@samba.org>,
"Anthony Liguori" <aliguori@amazon.com>,
"Igor Mammedov" <imammedo@redhat.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
"Andreas Färber" <afaerber@suse.de>,
"Alexander Graf" <agraf@suse.com>
Subject: [Qemu-devel] [PATCH 3/4] machine: Introduce QEMU_COMPAT_* macros
Date: Tue, 24 Jun 2014 15:02:03 -0300 [thread overview]
Message-ID: <1403632924-16603-4-git-send-email-ehabkost@redhat.com> (raw)
In-Reply-To: <1403632924-16603-1-git-send-email-ehabkost@redhat.com>
The QEMU_COMPAT_* macros will contain compat properties that are not
specific to PC, and may be reused by other machine-types.
PC-specific properties were left on the PC_COMPAT_* macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
---
include/hw/boards.h | 161 +++++++++++++++++++++++++++++++++++++++++++++++++++
include/hw/i386/pc.h | 150 ++---------------------------------------------
2 files changed, 166 insertions(+), 145 deletions(-)
diff --git a/include/hw/boards.h b/include/hw/boards.h
index 605a970..709b582 100644
--- a/include/hw/boards.h
+++ b/include/hw/boards.h
@@ -134,4 +134,165 @@ struct MachineState {
const char *cpu_model;
};
+
+/* Macros for compat_props corresponding to specific QEMU versions: */
+
+#define QEMU_COMPAT_2_0 \
+ {\
+ .driver = "virtio-scsi-pci",\
+ .property = "any_layout",\
+ .value = "off",\
+ },\
+ {\
+ .driver = "apic",\
+ .property = "version",\
+ .value = stringify(0x11),\
+ },\
+ {\
+ .driver = "nec-usb-xhci",\
+ .property = "superspeed-ports-first",\
+ .value = "off",\
+ },\
+ {\
+ .driver = "pci-serial",\
+ .property = "prog_if",\
+ .value = stringify(0),\
+ },\
+ {\
+ .driver = "pci-serial-2x",\
+ .property = "prof_if",\
+ .value = stringify(0),\
+ },\
+ {\
+ .driver = "pci-serial-4x",\
+ .property = "prog_if",\
+ .value = stringify(0),\
+ },\
+ {\
+ .driver = "virtio-net-pci",\
+ .property = "guest_announce",\
+ .value = "off",\
+ }
+
+#define QEMU_COMPAT_1_7 \
+ {\
+ .driver = TYPE_USB_DEVICE,\
+ .property = "msos-desc",\
+ .value = "no",\
+ }
+
+#define QEMU_COMPAT_1_6 \
+ {\
+ .driver = "e1000",\
+ .property = "mitigation",\
+ .value = "off",\
+ },{\
+ .driver = "qemu64-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(2),\
+ },{\
+ .driver = "qemu32-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(3),\
+ }
+
+#define QEMU_COMPAT_1_5 \
+ {\
+ .driver = "Conroe-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(2),\
+ },{\
+ .driver = "Conroe-" TYPE_X86_CPU,\
+ .property = "level",\
+ .value = stringify(2),\
+ },{\
+ .driver = "Penryn-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(2),\
+ },{\
+ .driver = "Penryn-" TYPE_X86_CPU,\
+ .property = "level",\
+ .value = stringify(2),\
+ },{\
+ .driver = "Nehalem-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(2),\
+ },{\
+ .driver = "Nehalem-" TYPE_X86_CPU,\
+ .property = "level",\
+ .value = stringify(2),\
+ },{\
+ .driver = "virtio-net-pci",\
+ .property = "any_layout",\
+ .value = "off",\
+ },{\
+ .driver = TYPE_X86_CPU,\
+ .property = "pmu",\
+ .value = "on",\
+ }
+
+#define QEMU_COMPAT_1_4 \
+ {\
+ .driver = "scsi-hd",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "scsi-cd",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "scsi-disk",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "ide-hd",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "ide-cd",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "ide-drive",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "virtio-blk-pci",\
+ .property = "discard_granularity",\
+ .value = stringify(0),\
+ },{\
+ .driver = "virtio-serial-pci",\
+ .property = "vectors",\
+ /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string */\
+ .value = stringify(0xFFFFFFFF),\
+ },{ \
+ .driver = "virtio-net-pci", \
+ .property = "ctrl_guest_offloads", \
+ .value = "off", \
+ },{\
+ .driver = "e1000",\
+ .property = "romfile",\
+ .value = "pxe-e1000.rom",\
+ },{\
+ .driver = "ne2k_pci",\
+ .property = "romfile",\
+ .value = "pxe-ne2k_pci.rom",\
+ },{\
+ .driver = "pcnet",\
+ .property = "romfile",\
+ .value = "pxe-pcnet.rom",\
+ },{\
+ .driver = "rtl8139",\
+ .property = "romfile",\
+ .value = "pxe-rtl8139.rom",\
+ },{\
+ .driver = "virtio-net-pci",\
+ .property = "romfile",\
+ .value = "pxe-virtio.rom",\
+ },{\
+ .driver = "486-" TYPE_X86_CPU,\
+ .property = "model",\
+ .value = stringify(0),\
+ }
+
#endif
diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
index d988b80..631afe7 100644
--- a/include/hw/i386/pc.h
+++ b/include/hw/i386/pc.h
@@ -295,52 +295,15 @@ int e820_get_num_entries(void);
bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
#define PC_COMPAT_2_0 \
+ QEMU_COMPAT_2_0,\
{\
- .driver = "virtio-scsi-pci",\
- .property = "any_layout",\
- .value = "off",\
- },{\
.driver = "PIIX4_PM",\
.property = "memory-hotplug-support",\
.value = "off",\
- },\
- {\
- .driver = "apic",\
- .property = "version",\
- .value = stringify(0x11),\
- },\
- {\
- .driver = "nec-usb-xhci",\
- .property = "superspeed-ports-first",\
- .value = "off",\
- },\
- {\
- .driver = "pci-serial",\
- .property = "prog_if",\
- .value = stringify(0),\
- },\
- {\
- .driver = "pci-serial-2x",\
- .property = "prof_if",\
- .value = stringify(0),\
- },\
- {\
- .driver = "pci-serial-4x",\
- .property = "prog_if",\
- .value = stringify(0),\
- },\
- {\
- .driver = "virtio-net-pci",\
- .property = "guest_announce",\
- .value = "off",\
}
#define PC_COMPAT_1_7 \
- {\
- .driver = TYPE_USB_DEVICE,\
- .property = "msos-desc",\
- .value = "no",\
- },\
+ QEMU_COMPAT_1_7,\
{\
.driver = "PIIX4_PM",\
.property = "acpi-pci-hotplug-with-bridge-support",\
@@ -348,19 +311,8 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
}
#define PC_COMPAT_1_6 \
+ QEMU_COMPAT_1_6,\
{\
- .driver = "e1000",\
- .property = "mitigation",\
- .value = "off",\
- },{\
- .driver = "qemu64-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(2),\
- },{\
- .driver = "qemu32-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(3),\
- },{\
.driver = "i440FX-pcihost",\
.property = "short_root_bus",\
.value = stringify(1),\
@@ -371,39 +323,8 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
}
#define PC_COMPAT_1_5 \
+ QEMU_COMPAT_1_7,\
{\
- .driver = "Conroe-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(2),\
- },{\
- .driver = "Conroe-" TYPE_X86_CPU,\
- .property = "level",\
- .value = stringify(2),\
- },{\
- .driver = "Penryn-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(2),\
- },{\
- .driver = "Penryn-" TYPE_X86_CPU,\
- .property = "level",\
- .value = stringify(2),\
- },{\
- .driver = "Nehalem-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(2),\
- },{\
- .driver = "Nehalem-" TYPE_X86_CPU,\
- .property = "level",\
- .value = stringify(2),\
- },{\
- .driver = "virtio-net-pci",\
- .property = "any_layout",\
- .value = "off",\
- },{\
- .driver = TYPE_X86_CPU,\
- .property = "pmu",\
- .value = "on",\
- },{\
.driver = "i440FX-pcihost",\
.property = "short_root_bus",\
.value = stringify(0),\
@@ -414,68 +335,7 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t *);
}
#define PC_COMPAT_1_4 \
- {\
- .driver = "scsi-hd",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "scsi-cd",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "scsi-disk",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "ide-hd",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "ide-cd",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "ide-drive",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "virtio-blk-pci",\
- .property = "discard_granularity",\
- .value = stringify(0),\
- },{\
- .driver = "virtio-serial-pci",\
- .property = "vectors",\
- /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string */\
- .value = stringify(0xFFFFFFFF),\
- },{ \
- .driver = "virtio-net-pci", \
- .property = "ctrl_guest_offloads", \
- .value = "off", \
- },{\
- .driver = "e1000",\
- .property = "romfile",\
- .value = "pxe-e1000.rom",\
- },{\
- .driver = "ne2k_pci",\
- .property = "romfile",\
- .value = "pxe-ne2k_pci.rom",\
- },{\
- .driver = "pcnet",\
- .property = "romfile",\
- .value = "pxe-pcnet.rom",\
- },{\
- .driver = "rtl8139",\
- .property = "romfile",\
- .value = "pxe-rtl8139.rom",\
- },{\
- .driver = "virtio-net-pci",\
- .property = "romfile",\
- .value = "pxe-virtio.rom",\
- },{\
- .driver = "486-" TYPE_X86_CPU,\
- .property = "model",\
- .value = stringify(0),\
- }
+ QEMU_COMPAT_1_4
#define PC_COMMON_MACHINE_OPTIONS \
.default_boot_order = "cad"
--
1.9.3
next prev parent reply other threads:[~2014-06-24 18:02 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-24 18:02 [Qemu-devel] [PATCH 0/4] Introduce common QEMU_COMPAT_* macros Eduardo Habkost
2014-06-24 18:02 ` [Qemu-devel] [PATCH 1/4] q35: Move q35-specific compat macros to pc_q35.c Eduardo Habkost
2014-06-24 19:23 ` Marcel Apfelbaum
2014-06-24 18:02 ` [Qemu-devel] [PATCH 2/4] pc: Eliminate nesting of common PC_COMPAT_* macros Eduardo Habkost
2014-06-25 5:13 ` Michael S. Tsirkin
2014-06-24 18:02 ` Eduardo Habkost [this message]
2014-06-24 19:20 ` [Qemu-devel] [PATCH 3/4] machine: Introduce QEMU_COMPAT_* macros Marcel Apfelbaum
2014-06-25 6:20 ` Igor Mammedov
2014-06-24 20:58 ` BALATON Zoltan
2014-06-24 23:01 ` Eduardo Habkost
2014-06-25 5:20 ` Michael S. Tsirkin
2014-06-25 6:46 ` Marcel Apfelbaum
2014-06-25 7:18 ` Michael S. Tsirkin
2014-06-25 7:20 ` Marcel Apfelbaum
2014-06-24 18:02 ` [Qemu-devel] [PATCH 4/4] [RFC] Eliminate PC-specific compat_props Eduardo Habkost
2014-06-24 19:51 ` Marcel Apfelbaum
2014-06-24 19:59 ` Eduardo Habkost
2014-06-25 4:55 ` Michael S. Tsirkin
2014-06-25 13:25 ` Eduardo Habkost
2014-06-25 14:12 ` Michael S. Tsirkin
2014-06-25 2:39 ` [Qemu-devel] [PATCH 0/4] Introduce common QEMU_COMPAT_* macros Alexey Kardashevskiy
2014-06-25 5:22 ` Michael S. Tsirkin
2014-06-25 4:57 ` Michael S. Tsirkin
2014-06-25 7:34 ` Michael S. Tsirkin
2014-06-25 13:50 ` Eduardo Habkost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403632924-16603-4-git-send-email-ehabkost@redhat.com \
--to=ehabkost@redhat.com \
--cc=afaerber@suse.de \
--cc=agraf@suse.com \
--cc=aik@ozlabs.ru \
--cc=aliguori@amazon.com \
--cc=armbru@redhat.com \
--cc=imammedo@redhat.com \
--cc=marcel.a@redhat.com \
--cc=mst@redhat.com \
--cc=paulus@samba.org \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).