From: Igor Mammedov <imammedo@redhat.com>
To: qemu-devel@nongnu.org
Cc: marcel.a@redhat.com, stefano.stabellini@eu.citrix.com,
agraf@suse.de, mst@redhat.com, pbonzini@redhat.com,
afaerber@suse.de
Subject: [Qemu-devel] [PATCH 1/4] switch RAM_ADDR_FMT format specifier to print decimal
Date: Wed, 25 Jun 2014 13:42:20 +0200 [thread overview]
Message-ID: <1403696543-2458-2-git-send-email-imammedo@redhat.com> (raw)
In-Reply-To: <1403696543-2458-1-git-send-email-imammedo@redhat.com>
... and add RAM_ADDR_FMTX for hex format. In addition fix
places to print sizes/lengths as decimal and addresses as hex.
Also drop "%" from RAM_ADDR_FMT macro and use it like other
PRIfoo format placeholders specifying "%" explicitly.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
arch_init.c | 14 +++++++-------
exec.c | 4 ++--
hw/i386/pc.c | 4 ++--
hw/ppc/ppc405_boards.c | 2 +-
include/exec/cpu-common.h | 6 ++++--
numa.c | 2 +-
vl.c | 6 +++---
xen-hvm.c | 11 +++++------
8 files changed, 25 insertions(+), 24 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 8ddaf35..7562325 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -1072,8 +1072,8 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
QTAILQ_FOREACH(block, &ram_list.blocks, next) {
if (!strncmp(id, block->idstr, sizeof(id))) {
if (block->length != length) {
- error_report("Length mismatch: %s: " RAM_ADDR_FMT
- " in != " RAM_ADDR_FMT, id, length,
+ error_report("Length mismatch: %s: %" RAM_ADDR_FMT
+ " in != %" RAM_ADDR_FMT, id, length,
block->length);
ret = -EINVAL;
}
@@ -1098,7 +1098,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
host = host_from_stream_offset(f, addr, flags);
if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
+ error_report("Illegal RAM offset %" RAM_ADDR_FMTX, addr);
ret = -EINVAL;
break;
}
@@ -1110,7 +1110,7 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
host = host_from_stream_offset(f, addr, flags);
if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
+ error_report("Illegal RAM offset %" RAM_ADDR_FMTX, addr);
ret = -EINVAL;
break;
}
@@ -1119,14 +1119,14 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
} else if (flags & RAM_SAVE_FLAG_XBZRLE) {
void *host = host_from_stream_offset(f, addr, flags);
if (!host) {
- error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
+ error_report("Illegal RAM offset %" RAM_ADDR_FMTX, addr);
ret = -EINVAL;
break;
}
if (load_xbzrle(f, addr, host) < 0) {
- error_report("Failed to decompress XBZRLE page at "
- RAM_ADDR_FMT, addr);
+ error_report("Failed to decompress XBZRLE page at %"
+ RAM_ADDR_FMTX, addr);
ret = -EINVAL;
break;
}
diff --git a/exec.c b/exec.c
index c849405..f9ae8a4 100644
--- a/exec.c
+++ b/exec.c
@@ -1435,8 +1435,8 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
flags, -1, 0);
}
if (area != vaddr) {
- fprintf(stderr, "Could not remap addr: "
- RAM_ADDR_FMT "@" RAM_ADDR_FMT "\n",
+ fprintf(stderr, "Could not remap addr: %"
+ RAM_ADDR_FMTX "@%" RAM_ADDR_FMTX "\n",
length, addr);
exit(1);
}
diff --git a/hw/i386/pc.c b/hw/i386/pc.c
index 2cf22b1..a6e7ef3 100644
--- a/hw/i386/pc.c
+++ b/hw/i386/pc.c
@@ -1257,8 +1257,8 @@ FWCfgState *pc_memory_init(MachineState *machine,
if ((pcms->hotplug_memory_base + hotplug_mem_size) <
hotplug_mem_size) {
- error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT,
- machine->maxram_size);
+ error_report("unsupported amount of maximum memory: %"
+ RAM_ADDR_FMT, machine->maxram_size);
exit(EXIT_FAILURE);
}
diff --git a/hw/ppc/ppc405_boards.c b/hw/ppc/ppc405_boards.c
index 98ad2d7..2b1b4fe 100644
--- a/hw/ppc/ppc405_boards.c
+++ b/hw/ppc/ppc405_boards.c
@@ -358,7 +358,7 @@ static void ref405ep_init(MachineState *machine)
bdloc = 0;
}
#ifdef DEBUG_BOARD_INIT
- printf("bdloc " RAM_ADDR_FMT "\n", bdloc);
+ printf("bdloc %" RAM_ADDR_FMTX "\n", bdloc);
printf("%s: Done\n", __func__);
#endif
}
diff --git a/include/exec/cpu-common.h b/include/exec/cpu-common.h
index e3ec4c8..6899d0c 100644
--- a/include/exec/cpu-common.h
+++ b/include/exec/cpu-common.h
@@ -38,11 +38,13 @@ enum device_endian {
#if defined(CONFIG_XEN_BACKEND)
typedef uint64_t ram_addr_t;
# define RAM_ADDR_MAX UINT64_MAX
-# define RAM_ADDR_FMT "%" PRIx64
+# define RAM_ADDR_FMTX PRIx64
+# define RAM_ADDR_FMT PRIu64
#else
typedef uintptr_t ram_addr_t;
# define RAM_ADDR_MAX UINTPTR_MAX
-# define RAM_ADDR_FMT "%" PRIxPTR
+# define RAM_ADDR_FMTX PRIxPTR
+# define RAM_ADDR_FMT PRIuPTR
#endif
extern ram_addr_t ram_size;
diff --git a/numa.c b/numa.c
index e471afe..d9f2655 100644
--- a/numa.c
+++ b/numa.c
@@ -189,7 +189,7 @@ void set_numa_nodes(void)
}
if (numa_total != ram_size) {
error_report("total memory for NUMA nodes (%" PRIu64 ")"
- " should equal RAM size (" RAM_ADDR_FMT ")",
+ " should equal RAM size (%" RAM_ADDR_FMT ")",
numa_total, ram_size);
exit(1);
}
diff --git a/vl.c b/vl.c
index a1686ef..6b09220 100644
--- a/vl.c
+++ b/vl.c
@@ -3319,7 +3319,7 @@ int main(int argc, char **argv, char **envp)
sz = qemu_opt_get_size(opts, "maxmem", 0);
if (sz < ram_size) {
fprintf(stderr, "qemu: invalid -m option value: maxmem "
- "(%" PRIu64 ") <= initial memory ("
+ "(%" PRIu64 ") <= initial memory (%"
RAM_ADDR_FMT ")\n", sz, ram_size);
exit(EXIT_FAILURE);
}
@@ -3327,7 +3327,7 @@ int main(int argc, char **argv, char **envp)
slots = qemu_opt_get_number(opts, "slots", 0);
if ((sz > ram_size) && !slots) {
fprintf(stderr, "qemu: invalid -m option value: maxmem "
- "(%" PRIu64 ") more than initial memory ("
+ "(%" PRIu64 ") more than initial memory (%"
RAM_ADDR_FMT ") but no hotplug slots where "
"specified\n", sz, ram_size);
exit(EXIT_FAILURE);
@@ -3336,7 +3336,7 @@ int main(int argc, char **argv, char **envp)
if ((sz <= ram_size) && slots) {
fprintf(stderr, "qemu: invalid -m option value: %"
PRIu64 " hotplug slots where specified but "
- "maxmem (%" PRIu64 ") <= initial memory ("
+ "maxmem (%" PRIu64 ") <= initial memory (%"
RAM_ADDR_FMT ")\n", slots, sz, ram_size);
exit(EXIT_FAILURE);
}
diff --git a/xen-hvm.c b/xen-hvm.c
index bafdf12..e7b4b76 100644
--- a/xen-hvm.c
+++ b/xen-hvm.c
@@ -221,8 +221,8 @@ void xen_ram_alloc(ram_addr_t ram_addr, ram_addr_t size, MemoryRegion *mr)
if (runstate_check(RUN_STATE_INMIGRATE)) {
/* RAM already populated in Xen */
- fprintf(stderr, "%s: do not alloc "RAM_ADDR_FMT
- " bytes of ram at "RAM_ADDR_FMT" when runstate is INMIGRATE\n",
+ fprintf(stderr, "%s: do not alloc %"RAM_ADDR_FMT" bytes"
+ " of ram at %"RAM_ADDR_FMTX" when runstate is INMIGRATE\n",
__func__, size, ram_addr);
return;
}
@@ -241,7 +241,7 @@ void xen_ram_alloc(ram_addr_t ram_addr, ram_addr_t size, MemoryRegion *mr)
}
if (xc_domain_populate_physmap_exact(xen_xc, xen_domid, nr_pfn, 0, 0, pfn_list)) {
- hw_error("xen: failed to populate ram at " RAM_ADDR_FMT, ram_addr);
+ hw_error("xen: failed to populate ram at %" RAM_ADDR_FMTX, ram_addr);
}
g_free(pfn_list);
@@ -1127,9 +1127,8 @@ void xen_modified_memory(ram_addr_t start, ram_addr_t length)
- start_pfn;
rc = xc_hvm_modified_memory(xen_xc, xen_domid, start_pfn, nb_pages);
if (rc) {
- fprintf(stderr,
- "%s failed for "RAM_ADDR_FMT" ("RAM_ADDR_FMT"): %i, %s\n",
- __func__, start, nb_pages, rc, strerror(-rc));
+ fprintf(stderr, "%s failed for %"RAM_ADDR_FMTX" (%"RAM_ADDR_FMT"):"
+ " %i, %s\n", __func__, start, nb_pages, rc, strerror(-rc));
}
}
}
--
1.7.1
next prev parent reply other threads:[~2014-06-25 11:42 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 11:42 [Qemu-devel] [PATCH 0/4] tests for -m option Igor Mammedov
2014-06-25 11:42 ` Igor Mammedov [this message]
2014-06-25 11:51 ` [Qemu-devel] [PATCH 1/4] switch RAM_ADDR_FMT format specifier to print decimal Michael S. Tsirkin
2014-06-25 12:14 ` Igor Mammedov
2014-06-25 15:38 ` Michael S. Tsirkin
2014-06-25 17:47 ` Peter Maydell
2014-06-25 11:42 ` [Qemu-devel] [PATCH 2/4] vl.c: use single local_err throughout main() Igor Mammedov
2014-06-25 11:51 ` Michael S. Tsirkin
2014-06-25 12:16 ` Igor Mammedov
2014-06-25 15:42 ` Michael S. Tsirkin
2014-06-25 11:42 ` [Qemu-devel] [PATCH 3/4] machine: convert ram_size, maxram_size, ram_slots to properties Igor Mammedov
2014-06-25 11:54 ` Michael S. Tsirkin
2014-06-25 13:08 ` Igor Mammedov
2014-06-25 15:37 ` Michael S. Tsirkin
2014-06-25 14:09 ` Kirill Batuzov
2014-06-25 14:45 ` Igor Mammedov
2014-06-25 11:42 ` [Qemu-devel] [PATCH 4/4] test -m option parameters Igor Mammedov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403696543-2458-2-git-send-email-imammedo@redhat.com \
--to=imammedo@redhat.com \
--cc=afaerber@suse.de \
--cc=agraf@suse.de \
--cc=marcel.a@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefano.stabellini@eu.citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).