From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 27/47] virtio-blk: Convert VirtIOBlockReq.out to structrue
Date: Fri, 27 Jun 2014 21:08:46 +0200 [thread overview]
Message-ID: <1403896146-3063-28-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1403896146-3063-1-git-send-email-kwolf@redhat.com>
From: Fam Zheng <famz@redhat.com>
The virtio code currently assumes that the outhdr is in its own iovec.
This is not guaranteed by the spec, so we should relax this assumption.
Convert the VirtIOBlockReq.out field to structrue so that we can use
iov_to_buf and then discard the header from the beginning of iovec.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/virtio-blk.c | 20 ++++++++++++++------
include/hw/virtio/virtio-blk.h | 2 +-
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index b5cc385..0561095 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -12,6 +12,7 @@
*/
#include "qemu-common.h"
+#include "qemu/iov.h"
#include "qemu/error-report.h"
#include "trace.h"
#include "hw/block/block.h"
@@ -81,7 +82,7 @@ static void virtio_blk_rw_complete(void *opaque, int ret)
trace_virtio_blk_rw_complete(req, ret);
if (ret) {
- bool is_read = !(ldl_p(&req->out->type) & VIRTIO_BLK_T_OUT);
+ bool is_read = !(ldl_p(&req->out.type) & VIRTIO_BLK_T_OUT);
if (virtio_blk_handle_rw_error(req, -ret, is_read))
return;
}
@@ -287,7 +288,7 @@ static void virtio_blk_handle_write(VirtIOBlockReq *req, MultiReqBuffer *mrb)
BlockRequest *blkreq;
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_WRITE);
@@ -321,7 +322,7 @@ static void virtio_blk_handle_read(VirtIOBlockReq *req)
{
uint64_t sector;
- sector = ldq_p(&req->out->sector);
+ sector = ldq_p(&req->out.sector);
bdrv_acct_start(req->dev->bs, &req->acct, req->qiov.size, BDRV_ACCT_READ);
@@ -344,22 +345,29 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
MultiReqBuffer *mrb)
{
uint32_t type;
+ struct iovec *iov = req->elem->out_sg;
+ unsigned out_num = req->elem->out_num;
if (req->elem->out_num < 1 || req->elem->in_num < 1) {
error_report("virtio-blk missing headers");
exit(1);
}
- if (req->elem->out_sg[0].iov_len < sizeof(*req->out) ||
+ if (req->elem->out_sg[0].iov_len < sizeof(req->out) ||
req->elem->in_sg[req->elem->in_num - 1].iov_len < sizeof(*req->in)) {
error_report("virtio-blk header not in correct element");
exit(1);
}
- req->out = (void *)req->elem->out_sg[0].iov_base;
+ if (unlikely(iov_to_buf(iov, out_num, 0, &req->out,
+ sizeof(req->out)) != sizeof(req->out))) {
+ error_report("virtio-blk request outhdr too short");
+ exit(1);
+ }
+ iov_discard_front(&iov, &out_num, sizeof(req->out));
req->in = (void *)req->elem->in_sg[req->elem->in_num - 1].iov_base;
- type = ldl_p(&req->out->type);
+ type = ldl_p(&req->out.type);
if (type & VIRTIO_BLK_T_FLUSH) {
virtio_blk_handle_flush(req, mrb);
diff --git a/include/hw/virtio/virtio-blk.h b/include/hw/virtio/virtio-blk.h
index b495e42..2571e96 100644
--- a/include/hw/virtio/virtio-blk.h
+++ b/include/hw/virtio/virtio-blk.h
@@ -138,7 +138,7 @@ typedef struct VirtIOBlockReq {
VirtIOBlock *dev;
VirtQueueElement *elem;
struct virtio_blk_inhdr *in;
- struct virtio_blk_outhdr *out;
+ struct virtio_blk_outhdr out;
QEMUIOVector qiov;
struct VirtIOBlockReq *next;
BlockAcctCookie acct;
--
1.8.3.1
next prev parent reply other threads:[~2014-06-27 19:10 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 19:08 [Qemu-devel] [PULL 00/47] Block patches for 2.1.0-rc0 Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 01/47] blockjob: Add block_job_yield() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 02/47] mirror: Go through ready -> complete process for 0 len image Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 03/47] qemu-iotests: Test BLOCK_JOB_READY event for 0Kb image active commit Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 04/47] qemu-iotests: Test 0-length image for mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 05/47] block/nfs: fix url parameter checking Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 06/47] block/nfs: add knob to set readahead Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 07/47] block: Create bdrv_fill_options() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 08/47] block: Move bdrv_fill_options() call to bdrv_open() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 09/47] block: Move json: parsing to bdrv_fill_options() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 10/47] block: Always pass driver name through options QDict Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 11/47] block: Use common driver selection code for bdrv_open_file() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 12/47] block: Inline bdrv_file_open() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 13/47] block: Remove second bdrv_open() recursion Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 14/47] block: Catch backing files assigned to non-COW drivers Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 15/47] block: Remove a special case for protocols Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 16/47] qemu_opts_append: Play nicely with QemuOptsList's head Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 17/47] block: check for RESIZE blocker in the QMP command, not bdrv_truncate() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 18/47] block: add qemu-iotest for resize base during live commit Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 19/47] quorum: Add the rewrite-corrupted parameter to quorum Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 20/47] block: Add node-name argument to drive-mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 21/47] virtio-blk: Move VirtIOBlockReq to header Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 22/47] virtio-blk: Convert VirtIOBlockReq.elem to pointer Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 23/47] virtio-blk: Drop bounce buffer from dataplane code Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 24/47] virtio-blk: Drop VirtIOBlockRequest.read Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 25/47] virtio-blk: Replace VirtIOBlockRequest with VirtIOBlockReq Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 26/47] virtio-blk: Use VirtIOBlockReq.in to drop VirtIOBlockReq.inhdr Kevin Wolf
2014-06-27 19:08 ` Kevin Wolf [this message]
2014-06-27 19:08 ` [Qemu-devel] [PULL 28/47] virtio-blk: Fill in VirtIOBlockReq.out in dataplane code Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 29/47] virtio-blk: Fix and clean up the in_sg and out_sg check Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 30/47] block: make bdrv_query_stats() static Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 31/47] block: acquire AioContext in qmp_query_blockstats() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 32/47] virtio-blk: Make request completion function virtual Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 33/47] virtio-blk: Export request handling functions to dataplane Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 34/47] virtio-blk: Schedule BH in the right context Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 35/47] virtio-blk: Unify {non-, }dataplane's request handlings Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 36/47] virtio-blk: Rename complete_request_early to complete_request_vring Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 37/47] blockjob: Fix recent BLOCK_JOB_READY regression Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 38/47] blockjob: Fix recent BLOCK_JOB_ERROR regression Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 39/47] block: Add replaces argument to drive-mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 40/47] qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 41/47] block.c: Don't return success for bdrv_append_temp_snapshot() failure Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 42/47] iotests: Allow out-of-tree run Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 43/47] configure: Enable out-of-tree iotests Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 44/47] iotests: Source common.env Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 45/47] iotests: Use $PYTHON for Python scripts Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 46/47] iotests: Drop Python version from 065's Shebang Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 47/47] iotests: Fix 083 for out-of-tree builds Kevin Wolf
2014-06-29 15:15 ` [Qemu-devel] [PULL 00/47] Block patches for 2.1.0-rc0 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403896146-3063-28-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).