From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com
Subject: [Qemu-devel] [PULL 29/47] virtio-blk: Fix and clean up the in_sg and out_sg check
Date: Fri, 27 Jun 2014 21:08:48 +0200 [thread overview]
Message-ID: <1403896146-3063-30-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1403896146-3063-1-git-send-email-kwolf@redhat.com>
From: Fam Zheng <famz@redhat.com>
out_sg is checked by iov_to_buf below, so it can be dropped.
Add assert and iov_discard_back around in_sg, as the in_sg is handled in
dataplane code.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
hw/block/virtio-blk.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/hw/block/virtio-blk.c b/hw/block/virtio-blk.c
index 0561095..4b1aeab 100644
--- a/hw/block/virtio-blk.c
+++ b/hw/block/virtio-blk.c
@@ -345,7 +345,9 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
MultiReqBuffer *mrb)
{
uint32_t type;
+ struct iovec *in_iov = req->elem->in_sg;
struct iovec *iov = req->elem->out_sg;
+ unsigned in_num = req->elem->in_num;
unsigned out_num = req->elem->out_num;
if (req->elem->out_num < 1 || req->elem->in_num < 1) {
@@ -353,19 +355,24 @@ static void virtio_blk_handle_request(VirtIOBlockReq *req,
exit(1);
}
- if (req->elem->out_sg[0].iov_len < sizeof(req->out) ||
- req->elem->in_sg[req->elem->in_num - 1].iov_len < sizeof(*req->in)) {
- error_report("virtio-blk header not in correct element");
- exit(1);
- }
-
if (unlikely(iov_to_buf(iov, out_num, 0, &req->out,
sizeof(req->out)) != sizeof(req->out))) {
error_report("virtio-blk request outhdr too short");
exit(1);
}
+
iov_discard_front(&iov, &out_num, sizeof(req->out));
- req->in = (void *)req->elem->in_sg[req->elem->in_num - 1].iov_base;
+
+ if (in_num < 1 ||
+ in_iov[in_num - 1].iov_len < sizeof(struct virtio_blk_inhdr)) {
+ error_report("virtio-blk request inhdr too short");
+ exit(1);
+ }
+
+ req->in = (void *)in_iov[in_num - 1].iov_base
+ + in_iov[in_num - 1].iov_len
+ - sizeof(struct virtio_blk_inhdr);
+ iov_discard_back(in_iov, &in_num, sizeof(struct virtio_blk_inhdr));
type = ldl_p(&req->out.type);
--
1.8.3.1
next prev parent reply other threads:[~2014-06-27 19:10 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 19:08 [Qemu-devel] [PULL 00/47] Block patches for 2.1.0-rc0 Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 01/47] blockjob: Add block_job_yield() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 02/47] mirror: Go through ready -> complete process for 0 len image Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 03/47] qemu-iotests: Test BLOCK_JOB_READY event for 0Kb image active commit Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 04/47] qemu-iotests: Test 0-length image for mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 05/47] block/nfs: fix url parameter checking Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 06/47] block/nfs: add knob to set readahead Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 07/47] block: Create bdrv_fill_options() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 08/47] block: Move bdrv_fill_options() call to bdrv_open() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 09/47] block: Move json: parsing to bdrv_fill_options() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 10/47] block: Always pass driver name through options QDict Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 11/47] block: Use common driver selection code for bdrv_open_file() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 12/47] block: Inline bdrv_file_open() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 13/47] block: Remove second bdrv_open() recursion Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 14/47] block: Catch backing files assigned to non-COW drivers Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 15/47] block: Remove a special case for protocols Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 16/47] qemu_opts_append: Play nicely with QemuOptsList's head Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 17/47] block: check for RESIZE blocker in the QMP command, not bdrv_truncate() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 18/47] block: add qemu-iotest for resize base during live commit Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 19/47] quorum: Add the rewrite-corrupted parameter to quorum Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 20/47] block: Add node-name argument to drive-mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 21/47] virtio-blk: Move VirtIOBlockReq to header Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 22/47] virtio-blk: Convert VirtIOBlockReq.elem to pointer Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 23/47] virtio-blk: Drop bounce buffer from dataplane code Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 24/47] virtio-blk: Drop VirtIOBlockRequest.read Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 25/47] virtio-blk: Replace VirtIOBlockRequest with VirtIOBlockReq Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 26/47] virtio-blk: Use VirtIOBlockReq.in to drop VirtIOBlockReq.inhdr Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 27/47] virtio-blk: Convert VirtIOBlockReq.out to structrue Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 28/47] virtio-blk: Fill in VirtIOBlockReq.out in dataplane code Kevin Wolf
2014-06-27 19:08 ` Kevin Wolf [this message]
2014-06-27 19:08 ` [Qemu-devel] [PULL 30/47] block: make bdrv_query_stats() static Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 31/47] block: acquire AioContext in qmp_query_blockstats() Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 32/47] virtio-blk: Make request completion function virtual Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 33/47] virtio-blk: Export request handling functions to dataplane Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 34/47] virtio-blk: Schedule BH in the right context Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 35/47] virtio-blk: Unify {non-, }dataplane's request handlings Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 36/47] virtio-blk: Rename complete_request_early to complete_request_vring Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 37/47] blockjob: Fix recent BLOCK_JOB_READY regression Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 38/47] blockjob: Fix recent BLOCK_JOB_ERROR regression Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 39/47] block: Add replaces argument to drive-mirror Kevin Wolf
2014-06-27 19:08 ` [Qemu-devel] [PULL 40/47] qemu-iotests: Add TestRepairQuorum to 041 to test drive-mirror node-name mode Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 41/47] block.c: Don't return success for bdrv_append_temp_snapshot() failure Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 42/47] iotests: Allow out-of-tree run Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 43/47] configure: Enable out-of-tree iotests Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 44/47] iotests: Source common.env Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 45/47] iotests: Use $PYTHON for Python scripts Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 46/47] iotests: Drop Python version from 065's Shebang Kevin Wolf
2014-06-27 19:09 ` [Qemu-devel] [PULL 47/47] iotests: Fix 083 for out-of-tree builds Kevin Wolf
2014-06-29 15:15 ` [Qemu-devel] [PULL 00/47] Block patches for 2.1.0-rc0 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403896146-3063-30-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).