From: greg.bellows@linaro.org
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, peter.crosthwaite@xilinx.com,
Fabian Aggeler <aggelerf@ethz.ch>,
Greg Bellows <greg.bellows@linaro.org>,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com,
christoffer.dall@linaro.org
Subject: [Qemu-devel] [PATCH v4 11/33] target-arm: add async excp target_el&mode function
Date: Mon, 30 Jun 2014 18:09:11 -0500 [thread overview]
Message-ID: <1404169773-20264-12-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1404169773-20264-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Adds a dedicated function for IRQ and FIQ exceptions to determine
target_el and mode (Aarch32) according to tables in ARM ARMv8 and
ARM ARM v7.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
--------------
v3 -> v4
- Fixed arm_phys_excp_target_el() 0/0/0 case to return excp_mode when EL<2
rather than ABORT.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
target-arm/cpu.h | 3 ++
target-arm/helper.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 140 insertions(+)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 7b2817c..1e8d5ee 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -784,6 +784,9 @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el)
void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf);
unsigned int arm_excp_target_el(CPUState *cs, unsigned int excp_idx);
+inline uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t *target_mode,
+ uint32_t excp_idx, uint32_t cur_el,
+ bool secure);
/* Interface between CPU and Interrupt controller. */
void armv7m_nvic_set_pending(void *opaque, int irq);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 2e285ab..4233ae3 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3239,6 +3239,21 @@ uint32_t HELPER(get_r13_banked)(CPUARMState *env, uint32_t mode)
return 0;
}
+inline uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t *target_mode,
+ uint32_t excp_idx, uint32_t cur_el,
+ bool secure)
+{
+ switch (excp_idx) {
+ case EXCP_IRQ:
+ *target_mode = ARM_CPU_MODE_IRQ;
+ break;
+ case EXCP_FIQ:
+ *target_mode = ARM_CPU_MODE_FIQ;
+ break;
+ }
+ return 1;
+}
+
unsigned int arm_excp_target_el(CPUState *cs, unsigned int excp_idx)
{
return 1;
@@ -3300,6 +3315,128 @@ void switch_mode(CPUARMState *env, int mode)
}
/*
+ * Determine the target EL for physical exceptions
+ */
+inline uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t *target_mode,
+ uint32_t excp_idx, uint32_t cur_el,
+ bool secure)
+{
+ CPUARMState *env = cs->env_ptr;
+ uint32_t target_el = 1;
+ uint32_t excp_mode = 0;
+
+ bool scr_routing = 0; /* IRQ, FIQ, EA */
+ bool hcr_routing = 0; /* IMO, FMO, AMO */
+
+ switch (excp_idx) {
+ case EXCP_IRQ:
+ scr_routing = (env->cp15.scr_el3 & SCR_IRQ);
+ hcr_routing = (env->cp15.hcr_el2 & HCR_IMO);
+ excp_mode = ARM_CPU_MODE_IRQ;
+ break;
+ case EXCP_FIQ:
+ scr_routing = (env->cp15.scr_el3 & SCR_FIQ);
+ hcr_routing = (env->cp15.hcr_el2 & HCR_FMO);
+ excp_mode = ARM_CPU_MODE_FIQ;
+ }
+
+ /* If HCR.TGE is set all exceptions that would be routed to EL1 are
+ * routed to EL2 (in non-secure world).
+ */
+ if (arm_feature(env, ARM_FEATURE_EL2) && (env->cp15.hcr_el2 & HCR_TGE)) {
+ hcr_routing = 1;
+ }
+
+ /* Determine target EL according to ARM ARMv8 tables G1-15 and G1-16 */
+ if (arm_el_is_aa64(env, 3)) {
+ /* EL3 in Aarch64 */
+ if (scr_routing) {
+ /* IRQ|FIQ|EA == 1 */
+ target_el = 3;
+ } else {
+ if (hcr_routing) {
+ /* IRQ|FIQ|EA == 0
+ * IMO|FMO|AMO == 1 */
+ if (secure) {
+ /* Secure */
+ target_el = 1;
+ if (!arm_el_is_aa64(env, 1)) {
+ /* EL1 using Aarch32 */
+ *target_mode = ARM_CPU_MODE_ABT;
+ }
+ } else if (cur_el < 2) {
+ /* Non-Secure goes to EL2 */
+ target_el = 2;
+ if (!arm_el_is_aa64(env, 2)) {
+ /* EL2 using Aarch32 */
+ *target_mode = ARM_CPU_MODE_HYP;
+ }
+ }
+ } else if (env->cp15.scr_el3 & SCR_RW) {
+ /* IRQ|FIQ|EA == 0
+ * IMO|FMO|AMO == 0
+ * RW == 1 (Next lower level is Aarch64)
+ */
+ if (cur_el < 2) {
+ target_el = 1;
+ } else {
+ /* Interrupt not taken but remains pending */
+ }
+ } else {
+ /* IRQ|FIQ|EA == 0
+ * IMO|FMO|AMO == 0
+ * RW == 0 (Next lower level is Aarch64)
+ */
+ if (cur_el < 2) {
+ target_el = 1;
+ *target_mode = excp_mode;
+ } else if (cur_el == 2) {
+ target_el = 2;
+ *target_mode = ARM_CPU_MODE_HYP;
+ } else {
+ /* Interrupt not taken but remains pending */
+ }
+ }
+ }
+ } else {
+ /* EL3 in Aarch32 */
+ if (scr_routing) {
+ /* IRQ|FIQ|EA == 1 */
+ target_el = 3;
+ *target_mode = ARM_CPU_MODE_MON;
+ } else {
+ if (hcr_routing) {
+ /* IRQ|FIQ|EA == 0
+ * IMO|FMO|AMO == 1
+ */
+ if (secure) {
+ target_el = 3;
+ *target_mode = excp_mode;
+ } else {
+ target_el = 2;
+ *target_mode = ARM_CPU_MODE_HYP;
+ }
+ } else {
+ /* IRQ|FIQ|EA == 0
+ * IMO|FMO|AMO == 0
+ */
+ if (cur_el < 2) {
+ target_el = 1;
+ *target_mode = excp_mode;
+ } else if (cur_el == 2) {
+ target_el = 2;
+ *target_mode = ARM_CPU_MODE_HYP;
+ } else if (secure) {
+ target_el = 3;
+ *target_mode = excp_mode;
+ }
+ }
+ }
+ }
+ return target_el;
+}
+
+/*
* Determine the target EL for a given exception type.
*/
unsigned int arm_excp_target_el(CPUState *cs, unsigned int excp_idx)
--
1.8.3.2
next prev parent reply other threads:[~2014-06-30 23:10 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-30 23:09 [Qemu-devel] [PATCH v4 00/33] target-arm: add Security Extensions for CPUs greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 01/33] target-arm: add cpu feature EL3 to CPUs with Security Extensions greg.bellows
2014-09-02 16:34 ` Peter Maydell
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 02/33] target-arm: move Aarch32 SCR into security reglist greg.bellows
2014-07-01 8:15 ` Edgar E. Iglesias
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 03/33] target-arm: increase arrays of registers R13 & R14 greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 04/33] target-arm: add arm_is_secure() function greg.bellows
2014-07-01 8:17 ` Edgar E. Iglesias
2014-07-01 13:51 ` Greg Bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 05/33] target-arm: reject switching to monitor mode greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 06/33] target-arm: make arm_current_pl() return PL3 greg.bellows
2014-08-26 14:29 ` Peter Maydell
2014-08-28 13:53 ` Greg Bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 07/33] target-arm: add non-secure Translation Block flag greg.bellows
2014-07-01 8:19 ` Edgar E. Iglesias
2014-09-02 16:11 ` Peter Maydell
2014-09-02 16:43 ` Greg Bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 08/33] target-arm: A32: Emulate the SMC instruction greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 09/33] target-arm: extend Aarch32 async excp masking greg.bellows
2014-07-01 8:22 ` Edgar E. Iglesias
2014-07-01 13:33 ` Greg Bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 10/33] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling greg.bellows
2014-06-30 23:09 ` greg.bellows [this message]
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 12/33] target-arm: use dedicated target_el function greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 13/33] target-arm: implement IRQ/FIQ routing to Monitor mode greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 14/33] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 15/33] target-arm: add NSACR register greg.bellows
2014-07-07 9:40 ` Aggeler Fabian
2014-07-07 14:15 ` Greg Bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 16/33] target-arm: add SDER definition greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 17/33] target-arm: add MVBAR support greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 18/33] target-arm: add macros to access banked registers greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 19/33] target-arm: insert Aarch32 cpregs twice into hashtable greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 20/33] target-arm: arrayfying fieldoffset for banking greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 21/33] target-arm: add SCTLR_EL3 and make SCTLR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 22/33] target-arm: make CSSELR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 23/33] target-arm: add TTBR0_EL3 and make TTBR0/1 banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 24/33] target-arm: add TCR_EL3 and make TTBCR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 25/33] target-arm: make c2_mask and c2_base_mask banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 26/33] target-arm: make DACR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 27/33] target-arm: make IFSR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 28/33] target-arm: make DFSR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 29/33] target-arm: make IFAR/DFAR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 30/33] target-arm: make PAR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 31/33] target-arm: make VBAR banked greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 32/33] target-arm: make c13 cp regs banked (FCSEIDR, ...) greg.bellows
2014-06-30 23:09 ` [Qemu-devel] [PATCH v4 33/33] target-arm: Limit migration of duplicate CP regs greg.bellows
2014-07-02 9:41 ` [Qemu-devel] [PATCH v4 00/33] target-arm: add Security Extensions for CPUs Aggeler Fabian
2014-09-05 17:55 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404169773-20264-12-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=christoffer.dall@linaro.org \
--cc=edgar.iglesias@gmail.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).