From: Le Tan <tamlokveer@gmail.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, mst@redhat.com,
Le Tan <tamlokveer@gmail.com>,
jan.kiszka@web.de, pbonzini@redhat.com, afaerber@suse.de
Subject: [Qemu-devel] [PATCH] ahci: map memory via device's address space instead of address_space_memory
Date: Thu, 3 Jul 2014 16:26:27 +0800 [thread overview]
Message-ID: <1404375987-29810-1-git-send-email-tamlokveer@gmail.com> (raw)
In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.
Signed-off-by: Le Tan <tamlokveer@gmail.com>
---
hw/ide/ahci.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 9bae22e..7bb0a03 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -175,17 +175,18 @@ static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d,
ahci_check_irq(s);
}
-static void map_page(uint8_t **ptr, uint64_t addr, uint32_t wanted)
+static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr,
+ uint32_t wanted)
{
hwaddr len = wanted;
if (*ptr) {
- cpu_physical_memory_unmap(*ptr, len, 1, len);
+ dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
}
- *ptr = cpu_physical_memory_map(addr, &len, 1);
+ *ptr = dma_memory_map(as, addr, &len, DMA_DIRECTION_FROM_DEVICE);
if (len < wanted) {
- cpu_physical_memory_unmap(*ptr, len, 1, len);
+ dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
*ptr = NULL;
}
}
@@ -198,24 +199,24 @@ static void ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
switch (offset) {
case PORT_LST_ADDR:
pr->lst_addr = val;
- map_page(&s->dev[port].lst,
+ map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_LST_ADDR_HI:
pr->lst_addr_hi = val;
- map_page(&s->dev[port].lst,
+ map_page(s->as, &s->dev[port].lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
s->dev[port].cur_cmd = NULL;
break;
case PORT_FIS_ADDR:
pr->fis_addr = val;
- map_page(&s->dev[port].res_fis,
+ map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_FIS_ADDR_HI:
pr->fis_addr_hi = val;
- map_page(&s->dev[port].res_fis,
+ map_page(s->as, &s->dev[port].res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
break;
case PORT_IRQ_STAT:
@@ -1260,9 +1261,9 @@ static int ahci_state_post_load(void *opaque, int version_id)
ad = &s->dev[i];
AHCIPortRegs *pr = &ad->port_regs;
- map_page(&ad->lst,
+ map_page(s->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
- map_page(&ad->res_fis,
+ map_page(s->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
/*
* All pending i/o should be flushed out on a migrate. However,
--
1.7.9.5
next reply other threads:[~2014-07-03 8:25 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 8:26 Le Tan [this message]
2014-07-03 8:28 ` [Qemu-devel] [PATCH] ahci: map memory via device's address space instead of address_space_memory Michael S. Tsirkin
2014-07-03 8:47 ` Paolo Bonzini
2014-07-06 6:15 ` [Qemu-devel] for-2.1 (was Re: [PATCH] ahci: map memory via device's address space instead of address_space_memory) Michael S. Tsirkin
2014-07-06 13:45 ` Paolo Bonzini
2014-07-07 8:23 ` Stefan Hajnoczi
2014-07-03 8:43 ` [Qemu-devel] [PATCH] ahci: map memory via device's address space instead of address_space_memory Jan Kiszka
2014-07-03 9:41 ` Paolo Bonzini
2014-07-03 10:11 ` Michael S. Tsirkin
2014-07-03 10:02 ` Michael S. Tsirkin
2014-07-03 16:45 ` Jan Kiszka
2014-07-03 20:30 ` Michael S. Tsirkin
2014-07-04 5:26 ` Jan Kiszka
2014-07-06 5:58 ` Michael S. Tsirkin
2014-07-07 8:23 ` Stefan Hajnoczi
-- strict thread matches above, loose matches on Subject: below --
2015-02-26 5:13 Jordan Hargrave
2015-02-26 14:45 ` Stefan Hajnoczi
2015-02-26 21:31 ` Jordan Hargrave
2015-02-26 22:02 ` Paolo Bonzini
2015-03-09 22:42 ` John Snow
2015-02-26 22:31 ` John Snow
[not found] ` <CAC1AzdcoEUtiGyCSXSf0bniUvQZ9tTeX2Vc9KQUyBfQxFV+JFg@mail.gmail.com>
2015-03-02 16:37 ` John Snow
2015-03-12 17:41 ` John Snow
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404375987-29810-1-git-send-email-tamlokveer@gmail.com \
--to=tamlokveer@gmail.com \
--cc=afaerber@suse.de \
--cc=jan.kiszka@web.de \
--cc=kwolf@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).