From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH 20/46] Allow savevm handlers to state whether they could go into postcopy
Date: Fri, 4 Jul 2014 18:41:31 +0100 [thread overview]
Message-ID: <1404495717-4239-21-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1404495717-4239-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Use that to split the qemu_savevm_state_pending counts into postcopiable
and non-postcopiable amounts
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
arch_init.c | 7 +++++++
include/migration/vmstate.h | 2 +-
include/sysemu/sysemu.h | 4 +++-
migration.c | 9 ++++++++-
savevm.c | 23 +++++++++++++++++++----
5 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index a3c468e..aeeaf37 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -1190,6 +1190,12 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
return ret;
}
+/* RAM's always up for postcopying */
+static bool ram_can_postcopy(void *opaque)
+{
+ return true;
+}
+
static SaveVMHandlers savevm_ram_handlers = {
.save_live_setup = ram_save_setup,
.save_live_iterate = ram_save_iterate,
@@ -1197,6 +1203,7 @@ static SaveVMHandlers savevm_ram_handlers = {
.save_live_pending = ram_save_pending,
.load_state = ram_load,
.cancel = ram_migration_cancel,
+ .can_postcopy = ram_can_postcopy,
};
void ram_mig_init(void)
diff --git a/include/migration/vmstate.h b/include/migration/vmstate.h
index 9a001bd..4991935 100644
--- a/include/migration/vmstate.h
+++ b/include/migration/vmstate.h
@@ -54,7 +54,7 @@ typedef struct SaveVMHandlers {
/* This runs outside the iothread lock! */
int (*save_live_setup)(QEMUFile *f, void *opaque);
uint64_t (*save_live_pending)(QEMUFile *f, void *opaque, uint64_t max_size);
-
+ bool (*can_postcopy)(void *opaque);
LoadStateHandler *load_state;
} SaveVMHandlers;
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index abf0d63..dc53580 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -109,7 +109,9 @@ void qemu_savevm_state_begin(QEMUFile *f,
int qemu_savevm_state_iterate(QEMUFile *f);
void qemu_savevm_state_complete(QEMUFile *f);
void qemu_savevm_state_cancel(void);
-uint64_t qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size);
+void qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size,
+ uint64_t *res_non_postcopiable,
+ uint64_t *res_postcopiable);
void qemu_savevm_command_send(QEMUFile *f, enum qemu_vm_cmd command,
uint16_t len, uint8_t *data);
void qemu_savevm_send_reqack(QEMUFile *f, uint32_t value);
diff --git a/migration.c b/migration.c
index eac12ab..8343679 100644
--- a/migration.c
+++ b/migration.c
@@ -806,8 +806,15 @@ static void *migration_thread(void *opaque)
uint64_t pending_size;
if (!qemu_file_rate_limit(s->file)) {
- pending_size = qemu_savevm_state_pending(s->file, max_size);
+ uint64_t pend_post, pend_nonpost;
+ DPRINTF("iterate\n");
+ qemu_savevm_state_pending(s->file, max_size, &pend_nonpost,
+ &pend_post);
+ pending_size = pend_nonpost + pend_post;
trace_migrate_pending(pending_size, max_size);
+ DPRINTF("pending size %" PRIu64 " max %" PRIu64 " (post=%" PRIu64
+ " nonpost=%" PRIu64 ")\n",
+ pending_size, max_size, pend_post, pend_nonpost);
if (pending_size && pending_size >= max_size) {
qemu_savevm_state_iterate(s->file);
} else {
diff --git a/savevm.c b/savevm.c
index 843443f..d8af526 100644
--- a/savevm.c
+++ b/savevm.c
@@ -903,10 +903,18 @@ void qemu_savevm_state_complete(QEMUFile *f)
qemu_fflush(f);
}
-uint64_t qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size)
+/* Give an estimate of the amount left to be transferred,
+ * the result is split into the amount for units that can and
+ * for units that can't do postcopy.
+ */
+void qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size,
+ uint64_t *res_non_postcopiable,
+ uint64_t *res_postcopiable)
{
SaveStateEntry *se;
- uint64_t ret = 0;
+ uint64_t res_nonpc = 0;
+ uint64_t res_pc = 0;
+ uint64_t tmp;
QTAILQ_FOREACH(se, &savevm_handlers, entry) {
if (!se->ops || !se->ops->save_live_pending) {
@@ -917,9 +925,16 @@ uint64_t qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size)
continue;
}
}
- ret += se->ops->save_live_pending(f, se->opaque, max_size);
+ tmp = se->ops->save_live_pending(f, se->opaque, max_size);
+
+ if (se->ops->can_postcopy(se->opaque)) {
+ res_pc += tmp;
+ } else {
+ res_nonpc += tmp;
+ }
}
- return ret;
+ *res_non_postcopiable = res_nonpc;
+ *res_postcopiable = res_pc;
}
void qemu_savevm_state_cancel(void)
--
1.9.3
next prev parent reply other threads:[~2014-07-04 17:42 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 17:41 [Qemu-devel] [PATCH 00/46] Postcopy implementation Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 01/46] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-07-07 15:46 ` Eric Blake
2014-07-07 15:48 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 02/46] Move QEMUFile structure to qemu-file.h Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 03/46] QEMUSizedBuffer/QEMUFile Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 04/46] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 05/46] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 06/46] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 07/46] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-07-05 10:06 ` Paolo Bonzini
2014-07-16 9:37 ` Dr. David Alan Gilbert
2014-07-16 9:50 ` Paolo Bonzini
2014-07-16 11:52 ` Dr. David Alan Gilbert
2014-07-16 12:31 ` Paolo Bonzini
2014-07-16 17:10 ` Dr. David Alan Gilbert
2014-07-17 6:25 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 08/46] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-07-05 10:07 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 09/46] Migration commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 10/46] Return path: Control commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 11/46] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 12/46] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 13/46] qemu_loadvm debug Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 14/46] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 15/46] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2014-07-05 10:26 ` Paolo Bonzini
2014-07-07 14:35 ` Dr. David Alan Gilbert
2014-07-07 14:53 ` Paolo Bonzini
2014-07-07 15:04 ` Dr. David Alan Gilbert
2014-07-16 9:25 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 16/46] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-07-07 19:41 ` Eric Blake
2014-07-07 20:23 ` Dr. David Alan Gilbert
2014-07-10 16:17 ` Paolo Bonzini
2014-07-10 19:02 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 17/46] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 18/46] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 19/46] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` Dr. David Alan Gilbert (git) [this message]
2014-07-04 17:41 ` [Qemu-devel] [PATCH 21/46] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 22/46] Migration parameters: Add qmp/hmp commands for setting/viewing Dr. David Alan Gilbert (git)
2014-07-07 19:50 ` Eric Blake
2014-07-04 17:41 ` [Qemu-devel] [PATCH 23/46] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 24/46] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 25/46] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 26/46] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 27/46] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 28/46] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 29/46] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 30/46] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 31/46] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-07-05 10:19 ` Paolo Bonzini
2014-08-28 11:04 ` Dr. David Alan Gilbert
2014-08-28 11:23 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 32/46] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 33/46] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 34/46] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 35/46] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 36/46] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 37/46] Add assertion to check migration_dirty_pages doesn't go -ve; have seen it happen once but not sure why Dr. David Alan Gilbert (git)
2014-07-11 15:20 ` Eric Blake
2014-07-11 15:41 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 38/46] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 39/46] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 40/46] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 41/46] Handle userfault requests (although userfaultfd not done yet) Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 42/46] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 43/46] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 44/46] postcopy: Use userfaultfd Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 45/46] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 46/46] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-07-05 10:28 ` [Qemu-devel] [PATCH 00/46] Postcopy implementation Paolo Bonzini
2014-07-07 14:02 ` Dr. David Alan Gilbert
2014-07-07 14:35 ` Paolo Bonzini
2014-07-07 14:58 ` Dr. David Alan Gilbert
2014-07-10 11:29 ` Dr. David Alan Gilbert
2014-07-10 12:48 ` Eric Blake
2014-07-10 13:37 ` Dr. David Alan Gilbert
2014-07-10 15:33 ` Andrea Arcangeli
2014-07-10 15:49 ` Dr. David Alan Gilbert
2014-07-11 4:05 ` Sanidhya Kashyap
2014-08-11 15:31 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404495717-4239-21-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=lilei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).