From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH 39/46] Postcopy: Use helpers to map pages during migration
Date: Fri, 4 Jul 2014 18:41:50 +0100 [thread overview]
Message-ID: <1404495717-4239-40-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1404495717-4239-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
In postcopy, the destination guest is running at the same time
as it's receiving pages; as we receive new pages we must put
them into the guests address space atomically to avoid a running
CPU accessing a partially written page.
Use the helpers in postcopy-ram.c to map these pages.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
arch_init.c | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 73 insertions(+), 7 deletions(-)
diff --git a/arch_init.c b/arch_init.c
index 58eccc1..b971f47 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -1328,9 +1328,18 @@ static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void *host)
return 0;
}
+/*
+ * Read a RAMBlock ID from the stream f, find the host address of the
+ * start of that block and add on 'offset'
+ *
+ * f: Stream to read from
+ * offset: Offset within the block
+ * flags: Page flags (mostly to see if it's a continuation of previous block)
+ * rb: Pointer to RAMBlock* that gets filled in with the RB we find
+ */
static inline void *host_from_stream_offset(QEMUFile *f,
ram_addr_t offset,
- int flags)
+ int flags, RAMBlock **rb)
{
static RAMBlock *block = NULL;
char id[256];
@@ -1341,6 +1350,9 @@ static inline void *host_from_stream_offset(QEMUFile *f,
error_report("Ack, bad migration stream!");
return NULL;
}
+ if (rb) {
+ *rb = block;
+ }
return memory_region_get_ram_ptr(block->mr) + offset;
}
@@ -1350,8 +1362,12 @@ static inline void *host_from_stream_offset(QEMUFile *f,
id[len] = 0;
QTAILQ_FOREACH(block, &ram_list.blocks, next) {
- if (!strncmp(id, block->idstr, sizeof(id)))
+ if (!strncmp(id, block->idstr, sizeof(id))) {
+ if (rb) {
+ *rb = block;
+ }
return memory_region_get_ram_ptr(block->mr) + offset;
+ }
}
error_report("Can't find block %s!", id);
@@ -1385,6 +1401,12 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
ram_addr_t addr;
int flags, ret = 0;
static uint64_t seq_iter;
+ /*
+ * System is running in postcopy mode, page inserts to host memory must be
+ * atomic
+ */
+ bool postcopy_running = f->mis->postcopy_ram_state >=
+ POSTCOPY_RAM_INCOMING_LISTENING;
seq_iter++;
@@ -1439,8 +1461,9 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
} else if (flags & RAM_SAVE_FLAG_COMPRESS) {
void *host;
uint8_t ch;
+ RAMBlock *rb;
- host = host_from_stream_offset(f, addr, flags);
+ host = host_from_stream_offset(f, addr, flags, &rb);
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
@@ -1448,20 +1471,63 @@ static int ram_load(QEMUFile *f, void *opaque, int version_id)
}
ch = qemu_get_byte(f);
- ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
+ if (!postcopy_running) {
+ ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
+ } else {
+ if (!ch) {
+ ret = postcopy_place_zero_page(f->mis, host,
+ (addr + rb->offset) >> TARGET_PAGE_BITS);
+ } else {
+ void *tmp;
+ tmp = postcopy_get_tmp_page(f->mis);
+ if (!tmp) {
+ return -ENOMEM;
+ }
+ memset(tmp, ch, TARGET_PAGE_SIZE);
+ ret = postcopy_place_page(f->mis, host, tmp,
+ (addr + rb->offset) >> TARGET_PAGE_BITS);
+ }
+ if (ret) {
+ error_report("ram_load: Failure in postcopy compress @"
+ "%zx/%p;%s+%zx",
+ addr, host, rb->idstr, rb->offset);
+ return ret;
+ }
+ }
} else if (flags & RAM_SAVE_FLAG_PAGE) {
void *host;
+ RAMBlock *rb;
- host = host_from_stream_offset(f, addr, flags);
+ host = host_from_stream_offset(f, addr, flags, &rb);
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
break;
}
- qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
+ if (!postcopy_running) {
+ qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
+ } else {
+ void *tmp = postcopy_get_tmp_page(f->mis);
+ if (!tmp) {
+ return -ENOMEM;
+ }
+ qemu_get_buffer(f, tmp, TARGET_PAGE_SIZE);
+ ret = postcopy_place_page(f->mis, host, tmp,
+ (addr + rb->offset) >> TARGET_PAGE_BITS);
+ if (ret) {
+ error_report("ram_load: Failure in postcopy simple"
+ "@%zx/%p;%s+%zx",
+ addr, host, rb->idstr, rb->offset);
+ return ret;
+ }
+ }
} else if (flags & RAM_SAVE_FLAG_XBZRLE) {
- void *host = host_from_stream_offset(f, addr, flags);
+ if (postcopy_running) {
+ error_report("XBZRLE RAM block in postcopy mode @%zx\n", addr);
+ return -EINVAL;
+ }
+ void *host = host_from_stream_offset(f, addr, flags, NULL);
if (!host) {
error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
ret = -EINVAL;
--
1.9.3
next prev parent reply other threads:[~2014-07-04 17:43 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 17:41 [Qemu-devel] [PATCH 00/46] Postcopy implementation Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 01/46] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-07-07 15:46 ` Eric Blake
2014-07-07 15:48 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 02/46] Move QEMUFile structure to qemu-file.h Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 03/46] QEMUSizedBuffer/QEMUFile Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 04/46] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 05/46] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 06/46] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 07/46] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-07-05 10:06 ` Paolo Bonzini
2014-07-16 9:37 ` Dr. David Alan Gilbert
2014-07-16 9:50 ` Paolo Bonzini
2014-07-16 11:52 ` Dr. David Alan Gilbert
2014-07-16 12:31 ` Paolo Bonzini
2014-07-16 17:10 ` Dr. David Alan Gilbert
2014-07-17 6:25 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 08/46] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-07-05 10:07 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 09/46] Migration commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 10/46] Return path: Control commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 11/46] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 12/46] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 13/46] qemu_loadvm debug Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 14/46] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 15/46] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2014-07-05 10:26 ` Paolo Bonzini
2014-07-07 14:35 ` Dr. David Alan Gilbert
2014-07-07 14:53 ` Paolo Bonzini
2014-07-07 15:04 ` Dr. David Alan Gilbert
2014-07-16 9:25 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 16/46] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-07-07 19:41 ` Eric Blake
2014-07-07 20:23 ` Dr. David Alan Gilbert
2014-07-10 16:17 ` Paolo Bonzini
2014-07-10 19:02 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 17/46] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 18/46] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 19/46] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 20/46] Allow savevm handlers to state whether they could go into postcopy Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 21/46] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 22/46] Migration parameters: Add qmp/hmp commands for setting/viewing Dr. David Alan Gilbert (git)
2014-07-07 19:50 ` Eric Blake
2014-07-04 17:41 ` [Qemu-devel] [PATCH 23/46] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 24/46] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 25/46] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 26/46] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 27/46] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 28/46] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 29/46] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 30/46] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 31/46] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-07-05 10:19 ` Paolo Bonzini
2014-08-28 11:04 ` Dr. David Alan Gilbert
2014-08-28 11:23 ` Paolo Bonzini
2014-07-04 17:41 ` [Qemu-devel] [PATCH 32/46] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 33/46] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 34/46] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 35/46] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 36/46] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 37/46] Add assertion to check migration_dirty_pages doesn't go -ve; have seen it happen once but not sure why Dr. David Alan Gilbert (git)
2014-07-11 15:20 ` Eric Blake
2014-07-11 15:41 ` Dr. David Alan Gilbert
2014-07-04 17:41 ` [Qemu-devel] [PATCH 38/46] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` Dr. David Alan Gilbert (git) [this message]
2014-07-04 17:41 ` [Qemu-devel] [PATCH 40/46] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 41/46] Handle userfault requests (although userfaultfd not done yet) Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 42/46] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 43/46] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 44/46] postcopy: Use userfaultfd Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 45/46] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-07-04 17:41 ` [Qemu-devel] [PATCH 46/46] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-07-05 10:28 ` [Qemu-devel] [PATCH 00/46] Postcopy implementation Paolo Bonzini
2014-07-07 14:02 ` Dr. David Alan Gilbert
2014-07-07 14:35 ` Paolo Bonzini
2014-07-07 14:58 ` Dr. David Alan Gilbert
2014-07-10 11:29 ` Dr. David Alan Gilbert
2014-07-10 12:48 ` Eric Blake
2014-07-10 13:37 ` Dr. David Alan Gilbert
2014-07-10 15:33 ` Andrea Arcangeli
2014-07-10 15:49 ` Dr. David Alan Gilbert
2014-07-11 4:05 ` Sanidhya Kashyap
2014-08-11 15:31 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404495717-4239-40-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=lilei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).