From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
Markus Armbruster <armbru@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL for-2.1 06/11] raw-posix: Fix raw_getlength() to always return -errno on error
Date: Mon, 7 Jul 2014 14:28:33 +0200 [thread overview]
Message-ID: <1404736118-10078-7-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1404736118-10078-1-git-send-email-stefanha@redhat.com>
From: Markus Armbruster <armbru@redhat.com>
We got a merry mix of -1 and -errno here.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/raw-posix.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/block/raw-posix.c b/block/raw-posix.c
index 825a0c8..fa005b3 100644
--- a/block/raw-posix.c
+++ b/block/raw-posix.c
@@ -1133,12 +1133,12 @@ static int64_t raw_getlength(BlockDriverState *bs)
struct stat st;
if (fstat(fd, &st))
- return -1;
+ return -errno;
if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
struct disklabel dl;
if (ioctl(fd, DIOCGDINFO, &dl))
- return -1;
+ return -errno;
return (uint64_t)dl.d_secsize *
dl.d_partitions[DISKPART(st.st_rdev)].p_size;
} else
@@ -1152,7 +1152,7 @@ static int64_t raw_getlength(BlockDriverState *bs)
struct stat st;
if (fstat(fd, &st))
- return -1;
+ return -errno;
if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
struct dkwedge_info dkw;
@@ -1162,7 +1162,7 @@ static int64_t raw_getlength(BlockDriverState *bs)
struct disklabel dl;
if (ioctl(fd, DIOCGDINFO, &dl))
- return -1;
+ return -errno;
return (uint64_t)dl.d_secsize *
dl.d_partitions[DISKPART(st.st_rdev)].p_size;
}
@@ -1175,6 +1175,7 @@ static int64_t raw_getlength(BlockDriverState *bs)
BDRVRawState *s = bs->opaque;
struct dk_minfo minfo;
int ret;
+ int64_t size;
ret = fd_open(bs);
if (ret < 0) {
@@ -1193,7 +1194,11 @@ static int64_t raw_getlength(BlockDriverState *bs)
* There are reports that lseek on some devices fails, but
* irc discussion said that contingency on contingency was overkill.
*/
- return lseek(s->fd, 0, SEEK_END);
+ size = lseek(s->fd, 0, SEEK_END);
+ if (size < 0) {
+ return -errno;
+ }
+ return size;
}
#elif defined(CONFIG_BSD)
static int64_t raw_getlength(BlockDriverState *bs)
@@ -1231,6 +1236,9 @@ again:
size = LLONG_MAX;
#else
size = lseek(fd, 0LL, SEEK_END);
+ if (size < 0) {
+ return -errno;
+ }
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
switch(s->type) {
@@ -1247,6 +1255,9 @@ again:
#endif
} else {
size = lseek(fd, 0, SEEK_END);
+ if (size < 0) {
+ return -errno;
+ }
}
return size;
}
@@ -1255,13 +1266,18 @@ static int64_t raw_getlength(BlockDriverState *bs)
{
BDRVRawState *s = bs->opaque;
int ret;
+ int64_t size;
ret = fd_open(bs);
if (ret < 0) {
return ret;
}
- return lseek(s->fd, 0, SEEK_END);
+ size = lseek(s->fd, 0, SEEK_END);
+ if (size < 0) {
+ return -errno;
+ }
+ return size;
}
#endif
--
1.9.3
next prev parent reply other threads:[~2014-07-07 12:29 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 12:28 [Qemu-devel] [PULL for-2.1 00/11] Block patches Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 01/11] Fix nocow typos in manpage Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 02/11] mirror: Fix qiov size for short requests Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 03/11] MAINTAINERS: add Stefan Hajnoczi to IDE maintainers Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 04/11] ahci.c: mask unused flags when reading size PRDT DBC Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 05/11] qemu-iotests: Disable Quorum testing in 041 when Quorum is not builtin Stefan Hajnoczi
2014-07-07 12:28 ` Stefan Hajnoczi [this message]
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 07/11] ahci: map memory via device's address space instead of address_space_memory Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 08/11] block: block: introduce APIs for submitting IO as a batch Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 09/11] linux-aio: implement io plug, unplug and flush io queue Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 10/11] dataplane: submit I/O as a batch Stefan Hajnoczi
2014-07-07 12:28 ` [Qemu-devel] [PULL for-2.1 11/11] qmp: show QOM properties in device-list-properties Stefan Hajnoczi
2014-07-07 15:29 ` [Qemu-devel] [PULL for-2.1 00/11] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404736118-10078-7-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=armbru@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).