[Qemu-devel] [PULL for-2.1 07/11] ahci: map memory via device's address space instead of address_space_memory

[Stefan Hajnoczi <stefanha@redhat.com>]

From: Le Tan <tamlokveer@gmail.com>

In map_page() in hw/ide/ahci.c, replace cpu_physical_memory_map() and
cpu_physical_memory_unmap() with dma_memory_map() and dma_memory_unmap(),
because ahci devices should not access memory directly but via their address
space. Add an AddressSpace parameter to map_page(). In order to call
map_page(), we should pass the AHCIState.as as the AddressSpace argument.

Signed-off-by: Le Tan <tamlokveer@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/ide/ahci.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index cd140d1..604152a 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -175,17 +175,18 @@ static void ahci_trigger_irq(AHCIState *s, AHCIDevice *d,
     ahci_check_irq(s);
 }
 
-static void map_page(uint8_t **ptr, uint64_t addr, uint32_t wanted)
+static void map_page(AddressSpace *as, uint8_t **ptr, uint64_t addr,
+                     uint32_t wanted)
 {
     hwaddr len = wanted;
 
     if (*ptr) {
-        cpu_physical_memory_unmap(*ptr, len, 1, len);
+        dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
     }
 
-    *ptr = cpu_physical_memory_map(addr, &len, 1);
+    *ptr = dma_memory_map(as, addr, &len, DMA_DIRECTION_FROM_DEVICE);
     if (len < wanted) {
-        cpu_physical_memory_unmap(*ptr, len, 1, len);
+        dma_memory_unmap(as, *ptr, len, DMA_DIRECTION_FROM_DEVICE, len);
         *ptr = NULL;
     }
 }
@@ -198,24 +199,24 @@ static void  ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
     switch (offset) {
         case PORT_LST_ADDR:
             pr->lst_addr = val;
-            map_page(&s->dev[port].lst,
+            map_page(s->as, &s->dev[port].lst,
                      ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
             s->dev[port].cur_cmd = NULL;
             break;
         case PORT_LST_ADDR_HI:
             pr->lst_addr_hi = val;
-            map_page(&s->dev[port].lst,
+            map_page(s->as, &s->dev[port].lst,
                      ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
             s->dev[port].cur_cmd = NULL;
             break;
         case PORT_FIS_ADDR:
             pr->fis_addr = val;
-            map_page(&s->dev[port].res_fis,
+            map_page(s->as, &s->dev[port].res_fis,
                      ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
             break;
         case PORT_FIS_ADDR_HI:
             pr->fis_addr_hi = val;
-            map_page(&s->dev[port].res_fis,
+            map_page(s->as, &s->dev[port].res_fis,
                      ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
             break;
         case PORT_IRQ_STAT:
@@ -1265,9 +1266,9 @@ static int ahci_state_post_load(void *opaque, int version_id)
         ad = &s->dev[i];
         AHCIPortRegs *pr = &ad->port_regs;
 
-        map_page(&ad->lst,
+        map_page(s->as, &ad->lst,
                  ((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
-        map_page(&ad->res_fis,
+        map_page(s->as, &ad->res_fis,
                  ((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
         /*
          * All pending i/o should be flushed out on a migrate. However,
-- 
1.9.3