From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, John Snow <jsnow@redhat.com>,
stefanha@redhat.com, mst@redhat.com
Subject: [Qemu-devel] [PATCH 09/28] ide: wrap start_dma callback
Date: Mon, 7 Jul 2014 14:17:50 -0400 [thread overview]
Message-ID: <1404757089-4836-10-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1404757089-4836-1-git-send-email-jsnow@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
Make it optional and prepare for the next patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/atapi.c | 6 ++----
hw/ide/core.c | 15 ++++++++-------
hw/ide/internal.h | 1 +
3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index f7d2009..d13395e 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -255,8 +255,7 @@ static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
if (s->atapi_dma) {
bdrv_acct_start(s->bs, &s->acct, size, BDRV_ACCT_READ);
s->status = READY_STAT | SEEK_STAT | DRQ_STAT;
- s->bus->dma->ops->start_dma(s->bus->dma, s,
- ide_atapi_cmd_read_dma_cb);
+ ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
} else {
s->status = READY_STAT | SEEK_STAT;
ide_atapi_cmd_reply_end(s);
@@ -375,8 +374,7 @@ static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors,
/* XXX: check if BUSY_STAT should be set */
s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT;
- s->bus->dma->ops->start_dma(s->bus->dma, s,
- ide_atapi_cmd_read_dma_cb);
+ ide_start_dma(s, ide_atapi_cmd_read_dma_cb);
}
static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors,
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 4b47bf5..82aa0b9 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -722,7 +722,14 @@ static void ide_sector_start_dma(IDEState *s, enum ide_dma_cmd dma_cmd)
break;
}
- s->bus->dma->ops->start_dma(s->bus->dma, s, ide_dma_cb);
+ ide_start_dma(s, ide_dma_cb);
+}
+
+void ide_start_dma(IDEState *s, BlockDriverCompletionFunc *cb)
+{
+ if (s->bus->dma->ops->start_dma) {
+ s->bus->dma->ops->start_dma(s->bus->dma, s, cb);
+ }
}
static void ide_sector_write_timer_cb(void *opaque)
@@ -2176,11 +2183,6 @@ static void ide_init1(IDEBus *bus, int unit)
ide_sector_write_timer_cb, s);
}
-static void ide_nop_start(IDEDMA *dma, IDEState *s,
- BlockDriverCompletionFunc *cb)
-{
-}
-
static int ide_nop_int(IDEDMA *dma, int x)
{
return 0;
@@ -2191,7 +2193,6 @@ static void ide_nop_restart(void *opaque, int x, RunState y)
}
static const IDEDMAOps ide_dma_nop_ops = {
- .start_dma = ide_nop_start,
.prepare_buf = ide_nop_int,
.rw_buf = ide_nop_int,
.set_unit = ide_nop_int,
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 64fbf2f..2fe1f0a 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -532,6 +532,7 @@ void ide_bus_reset(IDEBus *bus);
int64_t ide_get_sector(IDEState *s);
void ide_set_sector(IDEState *s, int64_t sector_num);
+void ide_start_dma(IDEState *s, BlockDriverCompletionFunc *cb);
void ide_dma_error(IDEState *s);
void ide_atapi_cmd_ok(IDEState *s);
--
1.9.3
next prev parent reply other threads:[~2014-07-07 18:18 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 18:17 [Qemu-devel] [PATCH 00/28] ahci refactoring to support ahci-test suite John Snow
2014-07-07 18:17 ` [Qemu-devel] [PATCH 01/28] blkdebug: report errors on flush too John Snow
2014-07-17 13:28 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 02/28] libqtest: add QTEST_LOG for debugging qtest testcases John Snow
2014-07-17 13:32 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 03/28] ide-test: add test for werror=stop John Snow
2014-07-31 10:58 ` Stefan Hajnoczi
2014-07-31 22:06 ` John Snow
2014-08-01 7:13 ` Markus Armbruster
2014-07-07 18:17 ` [Qemu-devel] [PATCH 04/28] ide: stash aiocb for flushes John Snow
2014-07-31 11:53 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 05/28] ide: simplify reset callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 06/28] ide: simplify set_inactive callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 07/28] ide: simplify async_cmd_done callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 08/28] ide: simplify start_transfer callbacks John Snow
2014-07-31 11:55 ` Stefan Hajnoczi
2014-07-07 18:17 ` John Snow [this message]
2014-07-31 11:55 ` [Qemu-devel] [PATCH 09/28] ide: wrap start_dma callback Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 10/28] ide: remove wrong setting of BM_STATUS_INT John Snow
2014-07-31 11:56 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 11/28] ide: fold add_status callback into set_inactive John Snow
2014-07-31 11:57 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 12/28] ide: move BM_STATUS bits to pci.[ch] John Snow
2014-07-31 11:57 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 13/28] ide: move retry constants out of BM_STATUS_* namespace John Snow
2014-07-31 12:06 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 14/28] ahci: remove duplicate PORT_IRQ_* constants John Snow
2014-07-31 12:12 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 15/28] ide: stop PIO transfer on errors John Snow
2014-07-31 12:23 ` Stefan Hajnoczi
2014-07-31 23:32 ` John Snow
2014-08-01 7:15 ` Paolo Bonzini
2014-07-07 18:17 ` [Qemu-devel] [PATCH 16/28] ide: make all commands go through cmd_done John Snow
2014-07-31 12:25 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 17/28] ahci: construct PIO Setup FIS for PIO commands John Snow
2014-07-31 12:32 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 18/28] q35: Enable the ioapic device to be seen by qtest John Snow
2014-07-31 12:33 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 19/28] qtest: Adding qtest_memset and qmemset John Snow
2014-07-31 12:37 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 20/28] libqos: Correct memory leak John Snow
2014-07-31 12:38 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 21/28] libqtest: Correct small " John Snow
2014-07-31 12:39 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 22/28] libqos: Fixes a " John Snow
2014-07-31 12:40 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 23/28] ahci: Adding basic functionality qtest John Snow
2014-07-31 12:54 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 24/28] ahci: Add test_pci_spec to ahci-test John Snow
2014-07-31 13:19 ` Stefan Hajnoczi
2014-07-31 17:42 ` John Snow
2014-08-01 11:14 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 25/28] ahci: add test_pci_enable " John Snow
2014-07-31 13:36 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 26/28] ahci: Add test_hba_spec " John Snow
2014-07-31 14:01 ` Stefan Hajnoczi
2014-07-31 20:03 ` John Snow
2014-08-01 23:27 ` John Snow
2014-08-04 9:51 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 27/28] ahci: Add test_hba_enable " John Snow
2014-07-31 15:24 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 28/28] ahci: Add test_identify case " John Snow
2014-07-31 15:28 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404757089-4836-10-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).