From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, John Snow <jsnow@redhat.com>,
stefanha@redhat.com, mst@redhat.com
Subject: [Qemu-devel] [PATCH 12/28] ide: move BM_STATUS bits to pci.[ch]
Date: Mon, 7 Jul 2014 14:17:53 -0400 [thread overview]
Message-ID: <1404757089-4836-13-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1404757089-4836-1-git-send-email-jsnow@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
They are not used by AHCI, and should not be even available there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/internal.h | 11 -----------
hw/ide/pci.c | 4 ++++
hw/ide/pci.h | 7 +++++++
3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index b35e52c..f369b0b 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -484,10 +484,6 @@ struct IDEDevice {
uint64_t wwn;
};
-#define BM_STATUS_DMAING 0x01
-#define BM_STATUS_ERROR 0x02
-#define BM_STATUS_INT 0x04
-
/* FIXME These are not status register bits */
#define BM_STATUS_DMA_RETRY 0x08
#define BM_STATUS_PIO_RETRY 0x10
@@ -495,13 +491,6 @@ struct IDEDevice {
#define BM_STATUS_RETRY_FLUSH 0x40
#define BM_STATUS_RETRY_TRIM 0x80
-#define BM_MIGRATION_COMPAT_STATUS_BITS \
- (BM_STATUS_DMA_RETRY | BM_STATUS_PIO_RETRY | \
- BM_STATUS_RETRY_READ | BM_STATUS_RETRY_FLUSH)
-
-#define BM_CMD_START 0x01
-#define BM_CMD_READ 0x08
-
static inline IDEState *idebus_active_if(IDEBus *bus)
{
return bus->ifs + bus->unit;
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 73267a4..0e82cab 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -33,6 +33,10 @@
#define BMDMA_PAGE_SIZE 4096
+#define BM_MIGRATION_COMPAT_STATUS_BITS \
+ (BM_STATUS_DMA_RETRY | BM_STATUS_PIO_RETRY | \
+ BM_STATUS_RETRY_READ | BM_STATUS_RETRY_FLUSH)
+
static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
BlockDriverCompletionFunc *dma_cb)
{
diff --git a/hw/ide/pci.h b/hw/ide/pci.h
index 2428275..517711f 100644
--- a/hw/ide/pci.h
+++ b/hw/ide/pci.h
@@ -3,6 +3,13 @@
#include <hw/ide/internal.h>
+#define BM_STATUS_DMAING 0x01
+#define BM_STATUS_ERROR 0x02
+#define BM_STATUS_INT 0x04
+
+#define BM_CMD_START 0x01
+#define BM_CMD_READ 0x08
+
typedef struct BMDMAState {
IDEDMA dma;
uint8_t cmd;
--
1.9.3
next prev parent reply other threads:[~2014-07-07 18:18 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-07 18:17 [Qemu-devel] [PATCH 00/28] ahci refactoring to support ahci-test suite John Snow
2014-07-07 18:17 ` [Qemu-devel] [PATCH 01/28] blkdebug: report errors on flush too John Snow
2014-07-17 13:28 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 02/28] libqtest: add QTEST_LOG for debugging qtest testcases John Snow
2014-07-17 13:32 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 03/28] ide-test: add test for werror=stop John Snow
2014-07-31 10:58 ` Stefan Hajnoczi
2014-07-31 22:06 ` John Snow
2014-08-01 7:13 ` Markus Armbruster
2014-07-07 18:17 ` [Qemu-devel] [PATCH 04/28] ide: stash aiocb for flushes John Snow
2014-07-31 11:53 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 05/28] ide: simplify reset callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 06/28] ide: simplify set_inactive callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 07/28] ide: simplify async_cmd_done callbacks John Snow
2014-07-31 11:54 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 08/28] ide: simplify start_transfer callbacks John Snow
2014-07-31 11:55 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 09/28] ide: wrap start_dma callback John Snow
2014-07-31 11:55 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 10/28] ide: remove wrong setting of BM_STATUS_INT John Snow
2014-07-31 11:56 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 11/28] ide: fold add_status callback into set_inactive John Snow
2014-07-31 11:57 ` Stefan Hajnoczi
2014-07-07 18:17 ` John Snow [this message]
2014-07-31 11:57 ` [Qemu-devel] [PATCH 12/28] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 13/28] ide: move retry constants out of BM_STATUS_* namespace John Snow
2014-07-31 12:06 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 14/28] ahci: remove duplicate PORT_IRQ_* constants John Snow
2014-07-31 12:12 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 15/28] ide: stop PIO transfer on errors John Snow
2014-07-31 12:23 ` Stefan Hajnoczi
2014-07-31 23:32 ` John Snow
2014-08-01 7:15 ` Paolo Bonzini
2014-07-07 18:17 ` [Qemu-devel] [PATCH 16/28] ide: make all commands go through cmd_done John Snow
2014-07-31 12:25 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 17/28] ahci: construct PIO Setup FIS for PIO commands John Snow
2014-07-31 12:32 ` Stefan Hajnoczi
2014-07-07 18:17 ` [Qemu-devel] [PATCH 18/28] q35: Enable the ioapic device to be seen by qtest John Snow
2014-07-31 12:33 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 19/28] qtest: Adding qtest_memset and qmemset John Snow
2014-07-31 12:37 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 20/28] libqos: Correct memory leak John Snow
2014-07-31 12:38 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 21/28] libqtest: Correct small " John Snow
2014-07-31 12:39 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 22/28] libqos: Fixes a " John Snow
2014-07-31 12:40 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 23/28] ahci: Adding basic functionality qtest John Snow
2014-07-31 12:54 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 24/28] ahci: Add test_pci_spec to ahci-test John Snow
2014-07-31 13:19 ` Stefan Hajnoczi
2014-07-31 17:42 ` John Snow
2014-08-01 11:14 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 25/28] ahci: add test_pci_enable " John Snow
2014-07-31 13:36 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 26/28] ahci: Add test_hba_spec " John Snow
2014-07-31 14:01 ` Stefan Hajnoczi
2014-07-31 20:03 ` John Snow
2014-08-01 23:27 ` John Snow
2014-08-04 9:51 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 27/28] ahci: Add test_hba_enable " John Snow
2014-07-31 15:24 ` Stefan Hajnoczi
2014-07-07 18:18 ` [Qemu-devel] [PATCH 28/28] ahci: Add test_identify case " John Snow
2014-07-31 15:28 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404757089-4836-13-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).