From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: qemu-ppc@nongnu.org
Cc: agraf@suse.de, aik@ozlabs.ru, qemu-devel@nongnu.org,
Gavin Shan <gwshan@linux.vnet.ibm.com>,
alex.williamson@redhat.com
Subject: [Qemu-devel] [PATCH v12 4/4] sPAPR: Implement sPAPRPHBClass::eeh_handler
Date: Wed, 16 Jul 2014 10:20:05 +1000 [thread overview]
Message-ID: <1405470005-9957-5-git-send-email-gwshan@linux.vnet.ibm.com> (raw)
In-Reply-To: <1405470005-9957-1-git-send-email-gwshan@linux.vnet.ibm.com>
The patch implements sPAPRPHBClass::eeh_handler so that the
EEH RTAS requests can be routed to VFIO for further handling.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
hw/misc/vfio.c | 1 +
hw/ppc/spapr_pci_vfio.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+)
diff --git a/hw/misc/vfio.c b/hw/misc/vfio.c
index 0b9eba0..03f2839 100644
--- a/hw/misc/vfio.c
+++ b/hw/misc/vfio.c
@@ -4437,6 +4437,7 @@ int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
switch (req) {
case VFIO_CHECK_EXTENSION:
case VFIO_IOMMU_SPAPR_TCE_GET_INFO:
+ case VFIO_EEH_PE_OP:
break;
default:
/* Return an error on unknown requests */
diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
index d3bddf2..032431f 100644
--- a/hw/ppc/spapr_pci_vfio.c
+++ b/hw/ppc/spapr_pci_vfio.c
@@ -71,6 +71,61 @@ static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
spapr_tce_get_iommu(tcet));
}
+static int spapr_phb_vfio_eeh_handler(sPAPRPHBState *sphb, int req, int opt)
+{
+ sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
+ struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
+ int cmd;
+
+ switch (req) {
+ case RTAS_EEH_REQ_SET_OPTION:
+ switch (opt) {
+ case RTAS_EEH_DISABLE:
+ cmd = VFIO_EEH_PE_DISABLE;
+ break;
+ case RTAS_EEH_ENABLE:
+ cmd = VFIO_EEH_PE_ENABLE;
+ break;
+ case RTAS_EEH_THAW_IO:
+ cmd = VFIO_EEH_PE_UNFREEZE_IO;
+ break;
+ case RTAS_EEH_THAW_DMA:
+ cmd = VFIO_EEH_PE_UNFREEZE_DMA;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case RTAS_EEH_REQ_GET_STATE:
+ cmd = VFIO_EEH_PE_GET_STATE;
+ break;
+ case RTAS_EEH_REQ_RESET:
+ switch (opt) {
+ case RTAS_SLOT_RESET_DEACTIVATE:
+ cmd = VFIO_EEH_PE_RESET_DEACTIVATE;
+ break;
+ case RTAS_SLOT_RESET_HOT:
+ cmd = VFIO_EEH_PE_RESET_HOT;
+ break;
+ case RTAS_SLOT_RESET_FUNDAMENTAL:
+ cmd = VFIO_EEH_PE_RESET_FUNDAMENTAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ case RTAS_EEH_REQ_CONFIGURE:
+ cmd = VFIO_EEH_PE_CONFIGURE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ op.op = cmd;
+ return vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
+ VFIO_EEH_PE_OP, &op);
+}
+
static void spapr_phb_vfio_reset(DeviceState *qdev)
{
/* Do nothing */
@@ -84,6 +139,7 @@ static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
dc->props = spapr_phb_vfio_properties;
dc->reset = spapr_phb_vfio_reset;
spc->finish_realize = spapr_phb_vfio_finish_realize;
+ spc->eeh_handler = spapr_phb_vfio_eeh_handler;
}
static const TypeInfo spapr_phb_vfio_info = {
--
1.8.3.2
prev parent reply other threads:[~2014-07-16 0:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-16 0:20 [Qemu-devel] [PATCH v12 0/4] EEH Support for VFIO Devices Gavin Shan
2014-07-16 0:20 ` [Qemu-devel] [PATCH v12 1/4] spapr_pci: Make find_phb()/find_dev() public Gavin Shan
2014-07-28 12:49 ` Alexander Graf
2014-07-28 13:52 ` Alexey Kardashevskiy
2014-07-16 0:20 ` [Qemu-devel] [PATCH v12 2/4] sPAPR: Implement EEH RTAS calls Gavin Shan
2014-07-16 1:06 ` Alexey Kardashevskiy
2014-07-16 1:12 ` Gavin Shan
2014-07-16 1:28 ` Alexey Kardashevskiy
2014-07-16 0:20 ` [Qemu-devel] [PATCH v12 3/4] headers: Update kernel header Gavin Shan
2014-07-16 1:09 ` Alexey Kardashevskiy
2014-07-16 1:16 ` Gavin Shan
2014-07-16 1:32 ` Alexey Kardashevskiy
2014-07-16 1:40 ` Gavin Shan
2014-07-28 12:50 ` Alexander Graf
2014-07-16 0:20 ` Gavin Shan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405470005-9957-5-git-send-email-gwshan@linux.vnet.ibm.com \
--to=gwshan@linux.vnet.ibm.com \
--cc=agraf@suse.de \
--cc=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-ppc@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).