From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, rth@twiddle.net
Subject: [Qemu-devel] [PATCH v3 13/15] target-tricore: Add instructions of SC opcode format
Date: Mon, 4 Aug 2014 18:38:50 +0100 [thread overview]
Message-ID: <1407173932-969-14-git-send-email-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <1407173932-969-1-git-send-email-kbastian@mail.uni-paderborn.de>
Add instructions of SC opcode format.
Add helper for begin interrupt service routine.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
target-tricore/helper.h | 1 +
target-tricore/op_helper.c | 59 ++++++++++++++++++++++++++++++++++++++++++++++
target-tricore/translate.c | 48 +++++++++++++++++++++++++++++++++++++
3 files changed, 108 insertions(+)
diff --git a/target-tricore/helper.h b/target-tricore/helper.h
index adf5b26..3c73234 100644
--- a/target-tricore/helper.h
+++ b/target-tricore/helper.h
@@ -21,3 +21,4 @@ DEF_HELPER_3(sub_ssov, i32, env, i32, i32)
/* CSA */
DEF_HELPER_2(call, void, env, i32)
DEF_HELPER_1(ret, void, env)
+DEF_HELPER_2(bisr, void, env, i32)
diff --git a/target-tricore/op_helper.c b/target-tricore/op_helper.c
index 1326b0f..a4a6802 100644
--- a/target-tricore/op_helper.c
+++ b/target-tricore/op_helper.c
@@ -118,6 +118,28 @@ static void save_context_upper(CPUTRICOREState *env, int ea,
}
+static void save_context_lower(CPUTRICOREState *env, int ea,
+ target_ulong *new_FCX)
+{
+ *new_FCX = cpu_ldl_data(env, ea);
+ cpu_stl_data(env, ea, env->PCXI);
+ cpu_stl_data(env, ea+4, env->PSW);
+ cpu_stl_data(env, ea+8, env->gpr_a[2]);
+ cpu_stl_data(env, ea+12, env->gpr_a[3]);
+ cpu_stl_data(env, ea+16, env->gpr_d[0]);
+ cpu_stl_data(env, ea+20, env->gpr_d[1]);
+ cpu_stl_data(env, ea+24, env->gpr_d[2]);
+ cpu_stl_data(env, ea+28, env->gpr_d[3]);
+ cpu_stl_data(env, ea+32, env->gpr_a[4]);
+ cpu_stl_data(env, ea+36, env->gpr_a[5]);
+ cpu_stl_data(env, ea+40, env->gpr_a[6]);
+ cpu_stl_data(env, ea+44, env->gpr_a[7]);
+ cpu_stl_data(env, ea+48, env->gpr_d[4]);
+ cpu_stl_data(env, ea+52, env->gpr_d[5]);
+ cpu_stl_data(env, ea+56, env->gpr_d[6]);
+ cpu_stl_data(env, ea+60, env->gpr_d[7]);
+}
+
static void restore_context_upper(CPUTRICOREState *env, int ea,
target_ulong *new_PCXI, target_ulong *new_PSW)
{
@@ -239,6 +261,43 @@ void helper_ret(CPUTRICOREState *env)
}
}
+void helper_bisr(CPUTRICOREState *env, uint32_t const9)
+{
+ target_ulong tmp_FCX;
+ target_ulong ea;
+ target_ulong new_FCX;
+
+ if (env->FCX == 0) {
+ /* FCU trap */
+ }
+
+ tmp_FCX = env->FCX;
+ ea = ((env->FCX & 0xf0000) << 12) + ((env->FCX & 0xffff) << 6);
+
+ save_context_lower(env, ea, &new_FCX);
+
+ /* PCXI.PCPN = ICR.CCPN */
+ env->PCXI = (env->PCXI & 0xffffff) +
+ ((env->ICR & MASK_ICR_CCPN) << 24);
+ /* PCXI.PIE = ICR.IE */
+ env->PCXI = ((env->PCXI & ~MASK_PCXI_PIE) +
+ ((env->ICR & MASK_ICR_IE) << 15));
+ /* PCXI.UL = 0 */
+ env->PCXI &= ~(MASK_PCXI_UL);
+ /* PCXI[19: 0] = FCX[19: 0] */
+ env->PCXI = (env->PCXI & 0xfff00000) + (env->FCX & 0xfffff);
+ /* FXC[19: 0] = new_FCX[19: 0] */
+ env->FCX = (env->FCX & 0xfff00000) + (new_FCX & 0xfffff);
+ /* ICR.IE = 1 */
+ env->ICR |= MASK_ICR_IE;
+
+ env->ICR |= const9; /* ICR.CCPN = const9[7: 0];*/
+
+ if (tmp_FCX == env->LCX) {
+ /* FCD trap */
+ }
+}
+
static inline void QEMU_NORETURN do_raise_exception_err(CPUTRICOREState *env,
uint32_t exception,
int error_code,
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index 8dac707..88401be 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -652,6 +652,42 @@ static void decode_ssr_opc(DisasContext *ctx, int op1)
}
}
+static void decode_sc_opc(DisasContext *ctx, int op1)
+{
+ int32_t const16;
+
+ const16 = MASK_OP_SC_CONST8(ctx->opcode);
+
+ switch (op1) {
+ case OPC1_16_SC_AND:
+ tcg_gen_andi_tl(cpu_gpr_d[15], cpu_gpr_d[15], const16);
+ break;
+ case OPC1_16_SC_BISR:
+ gen_helper_1arg(bisr, const16 & 0xff);
+ break;
+ case OPC1_16_SC_LD_A:
+ gen_offset_ld(ctx, cpu_gpr_a[15], cpu_gpr_a[10], const16 * 4, MO_LESL);
+ break;
+ case OPC1_16_SC_LD_W:
+ gen_offset_ld(ctx, cpu_gpr_d[15], cpu_gpr_a[10], const16 * 4, MO_LESL);
+ break;
+ case OPC1_16_SC_MOV:
+ tcg_gen_movi_tl(cpu_gpr_d[15], const16);
+ break;
+ case OPC1_16_SC_OR:
+ tcg_gen_ori_tl(cpu_gpr_d[15], cpu_gpr_d[15], const16);
+ break;
+ case OPC1_16_SC_ST_A:
+ gen_offset_st(ctx, cpu_gpr_a[15], cpu_gpr_a[10], const16 * 4, MO_LESL);
+ break;
+ case OPC1_16_SC_ST_W:
+ gen_offset_st(ctx, cpu_gpr_d[15], cpu_gpr_a[10], const16 * 4, MO_LESL);
+ break;
+ case OPC1_16_SC_SUB_A:
+ tcg_gen_subi_tl(cpu_gpr_a[10], cpu_gpr_a[10], const16);
+ break;
+ }
+}
static void decode_16Bit_opc(CPUTRICOREState *env, DisasContext *ctx)
{
int op1;
@@ -783,6 +819,18 @@ static void decode_16Bit_opc(CPUTRICOREState *env, DisasContext *ctx)
address = MASK_OP_SBR_DISP4(ctx->opcode);
gen_compute_branch(ctx, op1, r1, 0, 0, address);
break;
+/* SC-format */
+ case OPC1_16_SC_AND:
+ case OPC1_16_SC_BISR:
+ case OPC1_16_SC_LD_A:
+ case OPC1_16_SC_LD_W:
+ case OPC1_16_SC_MOV:
+ case OPC1_16_SC_OR:
+ case OPC1_16_SC_ST_A:
+ case OPC1_16_SC_ST_W:
+ case OPC1_16_SC_SUB_A:
+ decode_sc_opc(ctx, op1);
+ break;
}
}
--
2.0.4
next prev parent reply other threads:[~2014-08-04 16:35 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 17:38 [Qemu-devel] [PATCH v3 00/15] TriCore architecture guest implementation Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 01/15] target-tricore: Add target stubs and qom-cpu Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 02/15] target-tricore: Add board for systemmode Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 03/15] target-tricore: Add softmmu support Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 04/15] target-tricore: Add initialization for translation and activate target Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 05/15] target-tricore: Add masks and opcodes for decoding Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 06/15] target-tricore: Add instructions of SRC opcode format Bastian Koppelmann
2014-08-04 18:35 ` Richard Henderson
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 07/15] target-tricore: Add instructions of SRR " Bastian Koppelmann
2014-08-04 19:14 ` Richard Henderson
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 08/15] target-tricore: Add instructions of SSR " Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 09/15] target-tricore: Add instructions of SRRS and SLRO " Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 10/15] target-tricore: Add instructions of SB " Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 11/15] target-tricore: Add instructions of SBC and SBRN " Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 12/15] target-tricore: Add instructions of SBR " Bastian Koppelmann
2014-08-04 17:38 ` Bastian Koppelmann [this message]
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 14/15] target-tricore: Add instructions of SLR, SSRO and SRO " Bastian Koppelmann
2014-08-04 17:38 ` [Qemu-devel] [PATCH v3 15/15] target-tricore: Add instructions of SR " Bastian Koppelmann
2014-08-04 19:22 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407173932-969-14-git-send-email-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).