qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, jsnow@redhat.com, stefanha@redhat.com,
	mst@redhat.com
Subject: [Qemu-devel] [PATCH v2 12/30] ide: move BM_STATUS bits to pci.[ch]
Date: Mon,  4 Aug 2014 17:11:13 -0400	[thread overview]
Message-ID: <1407186691-16103-13-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1407186691-16103-1-git-send-email-jsnow@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

They are not used by AHCI, and should not be even available there.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
 hw/ide/internal.h | 11 -----------
 hw/ide/pci.c      |  4 ++++
 hw/ide/pci.h      |  7 +++++++
 3 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index b35e52c..f369b0b 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -484,10 +484,6 @@ struct IDEDevice {
     uint64_t wwn;
 };
 
-#define BM_STATUS_DMAING 0x01
-#define BM_STATUS_ERROR  0x02
-#define BM_STATUS_INT    0x04
-
 /* FIXME These are not status register bits */
 #define BM_STATUS_DMA_RETRY  0x08
 #define BM_STATUS_PIO_RETRY  0x10
@@ -495,13 +491,6 @@ struct IDEDevice {
 #define BM_STATUS_RETRY_FLUSH 0x40
 #define BM_STATUS_RETRY_TRIM 0x80
 
-#define BM_MIGRATION_COMPAT_STATUS_BITS \
-        (BM_STATUS_DMA_RETRY | BM_STATUS_PIO_RETRY | \
-        BM_STATUS_RETRY_READ | BM_STATUS_RETRY_FLUSH)
-
-#define BM_CMD_START     0x01
-#define BM_CMD_READ      0x08
-
 static inline IDEState *idebus_active_if(IDEBus *bus)
 {
     return bus->ifs + bus->unit;
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 73267a4..0e82cab 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -33,6 +33,10 @@
 
 #define BMDMA_PAGE_SIZE 4096
 
+#define BM_MIGRATION_COMPAT_STATUS_BITS \
+        (BM_STATUS_DMA_RETRY | BM_STATUS_PIO_RETRY | \
+        BM_STATUS_RETRY_READ | BM_STATUS_RETRY_FLUSH)
+
 static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
                             BlockDriverCompletionFunc *dma_cb)
 {
diff --git a/hw/ide/pci.h b/hw/ide/pci.h
index 2428275..517711f 100644
--- a/hw/ide/pci.h
+++ b/hw/ide/pci.h
@@ -3,6 +3,13 @@
 
 #include <hw/ide/internal.h>
 
+#define BM_STATUS_DMAING 0x01
+#define BM_STATUS_ERROR  0x02
+#define BM_STATUS_INT    0x04
+
+#define BM_CMD_START     0x01
+#define BM_CMD_READ      0x08
+
 typedef struct BMDMAState {
     IDEDMA dma;
     uint8_t cmd;
-- 
1.9.3

  parent reply	other threads:[~2014-08-04 21:12 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-04 21:11 [Qemu-devel] [PATCH v2 00/30] AHCI test suite framework John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 01/30] blkdebug: report errors on flush too John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 02/30] libqtest: add QTEST_LOG for debugging qtest testcases John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 03/30] ide-test: add test for werror=stop John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 04/30] ide: stash aiocb for flushes John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 05/30] ide: simplify reset callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 06/30] ide: simplify set_inactive callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 07/30] ide: simplify async_cmd_done callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 08/30] ide: simplify start_transfer callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 09/30] ide: wrap start_dma callback John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 10/30] ide: remove wrong setting of BM_STATUS_INT John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 11/30] ide: fold add_status callback into set_inactive John Snow
2014-08-04 21:11 ` John Snow [this message]
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 13/30] ide: move retry constants out of BM_STATUS_* namespace John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 14/30] ahci: remove duplicate PORT_IRQ_* constants John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 15/30] ide: stop PIO transfer on errors John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 16/30] ide: make all commands go through cmd_done John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 17/30] ahci: construct PIO Setup FIS for PIO commands John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 18/30] q35: Enable the ioapic device to be seen by qtest John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 19/30] qtest: Adding qtest_memset and qmemset John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 20/30] libqos: Correct memory leak John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 21/30] libqtest: Correct small " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 22/30] libqos: Fixes a " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 23/30] libqos: allow qpci_iomap to return BAR mapping size John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 24/30] qtest/ide: Fix small memory leak John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 25/30] ahci: Adding basic functionality qtest John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 26/30] ahci: Add test_pci_spec to ahci-test John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 27/30] ahci: add test_pci_enable " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 28/30] ahci: Add test_hba_spec " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 29/30] ahci: Add test_hba_enable " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 30/30] ahci: Add test_identify case " John Snow
2014-08-06  9:43 ` [Qemu-devel] [PATCH v2 00/30] AHCI test suite framework Stefan Hajnoczi
2014-08-06 11:30   ` Markus Armbruster
2014-08-06 16:50     ` John Snow
2014-08-07  6:01       ` Markus Armbruster
2014-08-07  9:26       ` Stefan Hajnoczi
2014-08-11 16:14 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407186691-16103-13-git-send-email-jsnow@redhat.com \
    --to=jsnow@redhat.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).