[Qemu-devel] [PATCH v2 14/30] ahci: remove duplicate PORT_IRQ_* constants

[John Snow <jsnow@redhat.com>]

From: Paolo Bonzini <pbonzini@redhat.com>

These are defined twice, just use one set consistently.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
---
 hw/ide/ahci.c |  6 +++---
 hw/ide/ahci.h | 21 ---------------------
 2 files changed, 3 insertions(+), 24 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 0ec5627..e1f27bd 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -584,7 +584,7 @@ static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
     s->dev[port].finished |= finished;
     *(uint32_t*)(sdb_fis + 4) = cpu_to_le32(s->dev[port].finished);
 
-    ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_STAT_SDBS);
+    ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_SDB_FIS);
 }
 
 static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
@@ -629,7 +629,7 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
     }
 
     if (d2h_fis[2] & ERR_STAT) {
-        ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_TFES);
+        ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
     }
 
     ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
@@ -1039,7 +1039,7 @@ out:
 
     if (!(s->status & DRQ_STAT)) {
         /* done with DMA */
-        ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_DSS);
+        ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
     }
 }
 
diff --git a/hw/ide/ahci.h b/hw/ide/ahci.h
index f418b30..1543df7 100644
--- a/hw/ide/ahci.h
+++ b/hw/ide/ahci.h
@@ -132,27 +132,6 @@
 #define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
 #define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
 
-#define PORT_IRQ_STAT_DHRS        (1 << 0) /* Device to Host Register FIS */
-#define PORT_IRQ_STAT_PSS         (1 << 1) /* PIO Setup FIS */
-#define PORT_IRQ_STAT_DSS         (1 << 2) /* DMA Setup FIS */
-#define PORT_IRQ_STAT_SDBS        (1 << 3) /* Set Device Bits */
-#define PORT_IRQ_STAT_UFS         (1 << 4) /* Unknown FIS */
-#define PORT_IRQ_STAT_DPS         (1 << 5) /* Descriptor Processed */
-#define PORT_IRQ_STAT_PCS         (1 << 6) /* Port Connect Change Status */
-#define PORT_IRQ_STAT_DMPS        (1 << 7) /* Device Mechanical Presence
-                                              Status */
-#define PORT_IRQ_STAT_PRCS        (1 << 22) /* File Ready Status */
-#define PORT_IRQ_STAT_IPMS        (1 << 23) /* Incorrect Port Multiplier
-                                               Status */
-#define PORT_IRQ_STAT_OFS         (1 << 24) /* Overflow Status */
-#define PORT_IRQ_STAT_INFS        (1 << 26) /* Interface Non-Fatal Error
-                                               Status */
-#define PORT_IRQ_STAT_IFS         (1 << 27) /* Interface Fatal Error */
-#define PORT_IRQ_STAT_HBDS        (1 << 28) /* Host Bus Data Error Status */
-#define PORT_IRQ_STAT_HBFS        (1 << 29) /* Host Bus Fatal Error Status */
-#define PORT_IRQ_STAT_TFES        (1 << 30) /* Task File Error Status */
-#define PORT_IRQ_STAT_CPDS        (1U << 31) /* Code Port Detect Status */
-
 /* ap->flags bits */
 #define AHCI_FLAG_NO_NCQ                  (1 << 24)
 #define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
-- 
1.9.3