From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: pbonzini@redhat.com, jsnow@redhat.com, stefanha@redhat.com,
mst@redhat.com
Subject: [Qemu-devel] [PATCH v2 27/30] ahci: add test_pci_enable to ahci-test.
Date: Mon, 4 Aug 2014 17:11:28 -0400 [thread overview]
Message-ID: <1407186691-16103-28-git-send-email-jsnow@redhat.com> (raw)
In-Reply-To: <1407186691-16103-1-git-send-email-jsnow@redhat.com>
This adds a test wherein we engage the PCI AHCI
device and ensure that the memory region for the
HBA functionality is now accessible.
Under Q35 environments, additional PCI configuration
is performed to ensure that the HBA functionality
will become usable.
Signed-off-by: John Snow <jsnow@redhat.com>
---
tests/ahci-test.c | 57 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/libqos/pci.c | 6 ++++++
2 files changed, 63 insertions(+)
diff --git a/tests/ahci-test.c b/tests/ahci-test.c
index 29ac0d0..0ca4a20 100644
--- a/tests/ahci-test.c
+++ b/tests/ahci-test.c
@@ -56,6 +56,7 @@
/*** Globals ***/
static QGuestAllocator *guest_malloc;
static QPCIBus *pcibus;
+static uint64_t barsize;
static char tmp_path[] = "/tmp/qtest.XXXXXX";
static bool ahci_pedantic;
static uint32_t ahci_fingerprint;
@@ -66,6 +67,7 @@ static uint32_t ahci_fingerprint;
/*** Function Declarations ***/
static QPCIDevice *get_ahci_device(void);
+static QPCIDevice *start_ahci_device(QPCIDevice *dev, void **hba_base);
static void free_ahci_device(QPCIDevice *dev);
static void ahci_test_pci_spec(QPCIDevice *ahci);
static void ahci_test_pci_caps(QPCIDevice *ahci, uint16_t header,
@@ -111,6 +113,9 @@ static void free_ahci_device(QPCIDevice *ahci)
qpci_free_pc(pcibus);
pcibus = NULL;
}
+
+ /* Clear our cached barsize information. */
+ barsize = 0;
}
/*** Test Setup & Teardown ***/
@@ -169,6 +174,44 @@ static void ahci_shutdown(QPCIDevice *ahci)
qtest_shutdown();
}
+/*** Logical Device Initialization ***/
+
+/**
+ * Start the PCI device and sanity-check default operation.
+ */
+static void ahci_pci_enable(QPCIDevice *ahci, void **hba_base)
+{
+ uint8_t reg;
+
+ start_ahci_device(ahci, hba_base);
+
+ switch(ahci_fingerprint) {
+ case AHCI_INTEL_ICH9:
+ /* ICH9 has a register at PCI 0x92 that
+ * acts as a master port enabler mask. */
+ reg = qpci_config_readb(ahci, 0x92);
+ reg |= 0x3F;
+ qpci_config_writeb(ahci, 0x92, reg);
+ assert_bit_set(qpci_config_readb(ahci, 0x92), 0x3F);
+ break;
+ }
+
+}
+
+/**
+ * Map BAR5/ABAR, and engage the PCI device.
+ */
+static QPCIDevice *start_ahci_device(QPCIDevice *ahci, void **hba_base)
+{
+ /* Map AHCI's ABAR (BAR5) */
+ *hba_base = qpci_iomap(ahci, 5, &barsize);
+
+ /* turns on pci.cmd.iose, pci.cmd.mse and pci.cmd.bme */
+ qpci_device_enable(ahci);
+
+ return ahci;
+}
+
/*** Specification Adherence Tests ***/
/**
@@ -428,6 +471,19 @@ static void test_pci_spec(void)
ahci_shutdown(ahci);
}
+/**
+ * Engage the PCI AHCI device and sanity check the response.
+ * Perform additional PCI config space bringup for the HBA.
+ */
+static void test_pci_enable(void)
+{
+ QPCIDevice *ahci;
+ void *hba_base;
+ ahci = ahci_boot();
+ ahci_pci_enable(ahci, &hba_base);
+ ahci_shutdown(ahci);
+}
+
/******************************************************************************/
int main(int argc, char **argv)
@@ -479,6 +535,7 @@ int main(int argc, char **argv)
/* Run the tests */
qtest_add_func("/ahci/sanity", test_sanity);
qtest_add_func("/ahci/pci_spec", test_pci_spec);
+ qtest_add_func("/ahci/pci_enable", test_pci_enable);
ret = g_test_run();
diff --git a/tests/libqos/pci.c b/tests/libqos/pci.c
index ce0b308..b244689 100644
--- a/tests/libqos/pci.c
+++ b/tests/libqos/pci.c
@@ -73,6 +73,12 @@ void qpci_device_enable(QPCIDevice *dev)
cmd = qpci_config_readw(dev, PCI_COMMAND);
cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
qpci_config_writew(dev, PCI_COMMAND, cmd);
+
+ /* Verify the bits are now set. */
+ cmd = qpci_config_readw(dev, PCI_COMMAND);
+ g_assert_cmphex(cmd & PCI_COMMAND_IO, ==, PCI_COMMAND_IO);
+ g_assert_cmphex(cmd & PCI_COMMAND_MEMORY, ==, PCI_COMMAND_MEMORY);
+ g_assert_cmphex(cmd & PCI_COMMAND_MASTER, ==, PCI_COMMAND_MASTER);
}
uint8_t qpci_config_readb(QPCIDevice *dev, uint8_t offset)
--
1.9.3
next prev parent reply other threads:[~2014-08-04 21:12 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-04 21:11 [Qemu-devel] [PATCH v2 00/30] AHCI test suite framework John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 01/30] blkdebug: report errors on flush too John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 02/30] libqtest: add QTEST_LOG for debugging qtest testcases John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 03/30] ide-test: add test for werror=stop John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 04/30] ide: stash aiocb for flushes John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 05/30] ide: simplify reset callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 06/30] ide: simplify set_inactive callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 07/30] ide: simplify async_cmd_done callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 08/30] ide: simplify start_transfer callbacks John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 09/30] ide: wrap start_dma callback John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 10/30] ide: remove wrong setting of BM_STATUS_INT John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 11/30] ide: fold add_status callback into set_inactive John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 12/30] ide: move BM_STATUS bits to pci.[ch] John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 13/30] ide: move retry constants out of BM_STATUS_* namespace John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 14/30] ahci: remove duplicate PORT_IRQ_* constants John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 15/30] ide: stop PIO transfer on errors John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 16/30] ide: make all commands go through cmd_done John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 17/30] ahci: construct PIO Setup FIS for PIO commands John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 18/30] q35: Enable the ioapic device to be seen by qtest John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 19/30] qtest: Adding qtest_memset and qmemset John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 20/30] libqos: Correct memory leak John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 21/30] libqtest: Correct small " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 22/30] libqos: Fixes a " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 23/30] libqos: allow qpci_iomap to return BAR mapping size John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 24/30] qtest/ide: Fix small memory leak John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 25/30] ahci: Adding basic functionality qtest John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 26/30] ahci: Add test_pci_spec to ahci-test John Snow
2014-08-04 21:11 ` John Snow [this message]
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 28/30] ahci: Add test_hba_spec " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 29/30] ahci: Add test_hba_enable " John Snow
2014-08-04 21:11 ` [Qemu-devel] [PATCH v2 30/30] ahci: Add test_identify case " John Snow
2014-08-06 9:43 ` [Qemu-devel] [PATCH v2 00/30] AHCI test suite framework Stefan Hajnoczi
2014-08-06 11:30 ` Markus Armbruster
2014-08-06 16:50 ` John Snow
2014-08-07 6:01 ` Markus Armbruster
2014-08-07 9:26 ` Stefan Hajnoczi
2014-08-11 16:14 ` Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407186691-16103-28-git-send-email-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).