From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH v2 11/43] qemu_loadvm errors and debug
Date: Mon, 11 Aug 2014 15:29:27 +0100 [thread overview]
Message-ID: <1407767399-3030-12-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1407767399-3030-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Flip many fprintf's to error_report
Add lots of DPRINTF debug in qemu_loadvm*
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
savevm.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/savevm.c b/savevm.c
index 8eebbfd..2c0d61a 100644
--- a/savevm.c
+++ b/savevm.c
@@ -719,6 +719,8 @@ int qemu_savevm_state_iterate(QEMUFile *f)
trace_savevm_section_end(se->idstr, se->section_id);
if (ret < 0) {
+ DPRINTF("%s: setting error state after iterate on id=%d/%s",
+ __func__, se->section_id, se->idstr);
qemu_file_set_error(f, ret);
}
if (ret <= 0) {
@@ -1019,6 +1021,7 @@ int qemu_loadvm_state(QEMUFile *f)
SaveStateEntry *se;
char idstr[256];
+ DPRINTF("qemu_loadvm_state loop: section_type=%d", section_type);
switch (section_type) {
case QEMU_VM_SECTION_START:
case QEMU_VM_SECTION_FULL:
@@ -1032,6 +1035,9 @@ int qemu_loadvm_state(QEMUFile *f)
instance_id = qemu_get_be32(f);
version_id = qemu_get_be32(f);
+ DPRINTF("qemu_loadvm_state loop START/FULL: id=%d(%s)",
+ section_id, idstr);
+
/* Find savevm section */
se = find_se(idstr, instance_id);
if (se == NULL) {
@@ -1059,8 +1065,9 @@ int qemu_loadvm_state(QEMUFile *f)
ret = vmstate_load(f, le->se, le->version_id);
if (ret < 0) {
- fprintf(stderr, "qemu: warning: error while loading state for instance 0x%x of device '%s'\n",
- instance_id, idstr);
+ error_report("qemu: error while loading state for"
+ "instance 0x%x of device '%s'",
+ instance_id, idstr);
goto out;
}
break;
@@ -1068,23 +1075,25 @@ int qemu_loadvm_state(QEMUFile *f)
case QEMU_VM_SECTION_END:
section_id = qemu_get_be32(f);
+ DPRINTF("QEMU_VM_SECTION_PART/END entry for id=%d", section_id);
QLIST_FOREACH(le, &loadvm_handlers, entry) {
if (le->section_id == section_id) {
break;
}
}
if (le == NULL) {
- fprintf(stderr, "Unknown savevm section %d\n", section_id);
+ error_report("Unknown savevm section %d", section_id);
ret = -EINVAL;
goto out;
}
ret = vmstate_load(f, le->se, le->version_id);
if (ret < 0) {
- fprintf(stderr, "qemu: warning: error while loading state section id %d\n",
- section_id);
+ error_report("qemu: error while loading state section"
+ " id %d (%s)", section_id, le->se->idstr);
goto out;
}
+ DPRINTF("QEMU_VM_SECTION_PART/END done for id=%d", section_id);
break;
case QEMU_VM_COMMAND:
ret = loadvm_process_command(f);
@@ -1093,11 +1102,12 @@ int qemu_loadvm_state(QEMUFile *f)
}
break;
default:
- fprintf(stderr, "Unknown savevm section type %d\n", section_type);
+ error_report("Unknown savevm section type %d", section_type);
ret = -EINVAL;
goto out;
}
}
+ DPRINTF("qemu_loadvm_state loop: exited loop");
cpu_synchronize_all_post_init();
@@ -1113,6 +1123,7 @@ out:
ret = qemu_file_get_error(f);
}
+ DPRINTF("qemu_loadvm_state out: ret=%d", ret);
return ret;
}
--
1.9.3
next prev parent reply other threads:[~2014-08-11 14:30 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 14:29 [Qemu-devel] [PATCH v2 00/43] Postcopy implementation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 01/43] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-08-11 18:29 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 02/43] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 03/43] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 04/43] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 05/43] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 06/43] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-08-12 2:13 ` [Qemu-devel] 答复: " chenliang (T)
2014-08-12 9:36 ` [Qemu-devel] ????: [PATCH v2 06/43] Return path: socket_writev_buffer:?Block " Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 07/43] Migration commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 08/43] Return path: Control commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 09/43] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 10/43] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` Dr. David Alan Gilbert (git) [this message]
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 12/43] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 13/43] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 14/43] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-08-11 16:47 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 15/43] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 16/43] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 17/43] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 18/43] Allow savevm handlers to state whether they could go into postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 19/43] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-08-12 5:32 ` zhanghailiang
2014-08-12 8:18 ` Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 20/43] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2014-08-11 17:01 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 21/43] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 22/43] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 23/43] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 24/43] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 25/43] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 26/43] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 27/43] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 28/43] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 29/43] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 30/43] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 31/43] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 32/43] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 33/43] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 34/43] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 35/43] Add assertion to check migration_dirty_pages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 36/43] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 37/43] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 38/43] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 39/43] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 40/43] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 41/43] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 42/43] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 43/43] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-08-11 17:19 ` Eric Blake
2014-08-11 17:58 ` Dr. David Alan Gilbert
2014-08-12 1:50 ` [Qemu-devel] [PATCH v2 00/43] Postcopy implementation zhanghailiang
2014-08-12 9:19 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407767399-3030-12-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=lilei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).