From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH v2 12/43] ram_debug_dump_bitmap: Dump a migration bitmap as text
Date: Mon, 11 Aug 2014 15:29:28 +0100 [thread overview]
Message-ID: <1407767399-3030-13-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1407767399-3030-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Misses out lines that are all the expected value so the output
can be quite compact depending on the circumstance.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
arch_init.c | 39 +++++++++++++++++++++++++++++++++++++++
include/migration/migration.h | 1 +
2 files changed, 40 insertions(+)
diff --git a/arch_init.c b/arch_init.c
index eb6455a..a3c468e 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -767,6 +767,45 @@ static void reset_ram_globals(void)
#define MAX_WAIT 50 /* ms, half buffered_file limit */
+/*
+ * 'expected' is the value you expect the bitmap mostly to be full
+ * of and it won't bother printing lines that are all this value
+ * if 'todump' is null the migration bitmap is dumped.
+ */
+void ram_debug_dump_bitmap(unsigned long *todump, bool expected)
+{
+ int64_t ram_pages = last_ram_offset() >> TARGET_PAGE_BITS;
+
+ int64_t cur;
+ int64_t linelen = 128l;
+ char linebuf[129];
+
+ if (!todump) {
+ todump = migration_bitmap;
+ }
+
+ for (cur = 0; cur < ram_pages; cur += linelen) {
+ int64_t curb;
+ bool found = false;
+ /*
+ * Last line; catch the case where the line length
+ * is longer than remaining ram
+ */
+ if (cur+linelen > ram_pages) {
+ linelen = ram_pages - cur;
+ }
+ for (curb = 0; curb < linelen; curb++) {
+ bool thisbit = test_bit(cur+curb, todump);
+ linebuf[curb] = thisbit ? '1' : '.';
+ found |= (thisbit ^ expected);
+ }
+ if (found) {
+ linebuf[curb] = '\0';
+ fprintf(stderr, "0x%08lx : %s\n", cur, linebuf);
+ }
+ }
+}
+
static int ram_save_setup(QEMUFile *f, void *opaque)
{
RAMBlock *block;
diff --git a/include/migration/migration.h b/include/migration/migration.h
index 0c9055f..984d96c 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -158,6 +158,7 @@ uint64_t xbzrle_mig_pages_cache_miss(void);
double xbzrle_mig_cache_miss_rate(void);
void ram_handle_compressed(void *host, uint8_t ch, uint64_t size);
+void ram_debug_dump_bitmap(unsigned long *todump, bool expected);
/**
* @migrate_add_blocker - prevent migration from proceeding
--
1.9.3
next prev parent reply other threads:[~2014-08-11 14:30 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 14:29 [Qemu-devel] [PATCH v2 00/43] Postcopy implementation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 01/43] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-08-11 18:29 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 02/43] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 03/43] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 04/43] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 05/43] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 06/43] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-08-12 2:13 ` [Qemu-devel] 答复: " chenliang (T)
2014-08-12 9:36 ` [Qemu-devel] ????: [PATCH v2 06/43] Return path: socket_writev_buffer:?Block " Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 07/43] Migration commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 08/43] Return path: Control commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 09/43] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 10/43] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 11/43] qemu_loadvm errors and debug Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` Dr. David Alan Gilbert (git) [this message]
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 13/43] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 14/43] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-08-11 16:47 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 15/43] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 16/43] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 17/43] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 18/43] Allow savevm handlers to state whether they could go into postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 19/43] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-08-12 5:32 ` zhanghailiang
2014-08-12 8:18 ` Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 20/43] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2014-08-11 17:01 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 21/43] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 22/43] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 23/43] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 24/43] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 25/43] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 26/43] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 27/43] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 28/43] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 29/43] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 30/43] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 31/43] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 32/43] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 33/43] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 34/43] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 35/43] Add assertion to check migration_dirty_pages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 36/43] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 37/43] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 38/43] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 39/43] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 40/43] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 41/43] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 42/43] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 43/43] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-08-11 17:19 ` Eric Blake
2014-08-11 17:58 ` Dr. David Alan Gilbert
2014-08-12 1:50 ` [Qemu-devel] [PATCH v2 00/43] Postcopy implementation zhanghailiang
2014-08-12 9:19 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407767399-3030-13-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=lilei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).