From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH v2 13/43] Rework loadvm path for subloops
Date: Mon, 11 Aug 2014 15:29:29 +0100 [thread overview]
Message-ID: <1407767399-3030-14-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1407767399-3030-1-git-send-email-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Postcopy needs to have two migration streams loading concurrently;
one from memory (with the device state) and the other from the fd
with the memory transactions.
Split the core of qemu_loadvm_state out so we can use it for both.
Allow the inner loadvm loop to quit and signal whether the parent
should.
loadvm_handlers is made static since it's lifetime is greater
than the outer qemu_loadvm_state.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
savevm.c | 136 +++++++++++++++++++++++++++++++++++++++------------------------
1 file changed, 84 insertions(+), 52 deletions(-)
diff --git a/savevm.c b/savevm.c
index 2c0d61a..7236232 100644
--- a/savevm.c
+++ b/savevm.c
@@ -915,6 +915,26 @@ static SaveStateEntry *find_se(const char *idstr, int instance_id)
return NULL;
}
+/* These are ORable flags */
+const int LOADVM_EXITCODE_QUITLOOP = 1;
+const int LOADVM_EXITCODE_QUITPARENT = 2;
+const int LOADVM_EXITCODE_KEEPHANDLERS = 4;
+
+typedef struct LoadStateEntry {
+ QLIST_ENTRY(LoadStateEntry) entry;
+ SaveStateEntry *se;
+ int section_id;
+ int version_id;
+} LoadStateEntry;
+
+typedef QLIST_HEAD(, LoadStateEntry) LoadStateEntry_Head;
+
+static LoadStateEntry_Head loadvm_handlers =
+ QLIST_HEAD_INITIALIZER(loadvm_handlers);
+
+static int qemu_loadvm_state_main(QEMUFile *f,
+ LoadStateEntry_Head *loadvm_handlers);
+
static int loadvm_process_command_simple_lencheck(const char *name,
unsigned int actual,
unsigned int expected)
@@ -931,8 +951,11 @@ static int loadvm_process_command_simple_lencheck(const char *name,
/*
* Process an incoming 'QEMU_VM_COMMAND'
* negative return on error (will issue error message)
+ * 0 just a normal return
+ * 1 All good, but exit the loop
*/
-static int loadvm_process_command(QEMUFile *f)
+static int loadvm_process_command(QEMUFile *f,
+ LoadStateEntry_Head *loadvm_handlers)
{
MigrationIncomingState *mis = migration_incoming_get_current();
uint16_t com;
@@ -982,39 +1005,13 @@ static int loadvm_process_command(QEMUFile *f)
return 0;
}
-typedef struct LoadStateEntry {
- QLIST_ENTRY(LoadStateEntry) entry;
- SaveStateEntry *se;
- int section_id;
- int version_id;
-} LoadStateEntry;
-
-int qemu_loadvm_state(QEMUFile *f)
+static int qemu_loadvm_state_main(QEMUFile *f,
+ LoadStateEntry_Head *loadvm_handlers)
{
- QLIST_HEAD(, LoadStateEntry) loadvm_handlers =
- QLIST_HEAD_INITIALIZER(loadvm_handlers);
- LoadStateEntry *le, *new_le;
+ LoadStateEntry *le;
uint8_t section_type;
- unsigned int v;
int ret;
-
- if (qemu_savevm_state_blocked(NULL)) {
- return -EINVAL;
- }
-
- v = qemu_get_be32(f);
- if (v != QEMU_VM_FILE_MAGIC) {
- return -EINVAL;
- }
-
- v = qemu_get_be32(f);
- if (v == QEMU_VM_FILE_VERSION_COMPAT) {
- error_report("SaveVM v2 format is obsolete and don't work anymore");
- return -ENOTSUP;
- }
- if (v != QEMU_VM_FILE_VERSION) {
- return -ENOTSUP;
- }
+ int exitcode = 0;
while ((section_type = qemu_get_byte(f)) != QEMU_VM_EOF) {
uint32_t instance_id, version_id, section_id;
@@ -1043,16 +1040,14 @@ int qemu_loadvm_state(QEMUFile *f)
if (se == NULL) {
error_report("Unknown savevm section or instance '%s' %d",
idstr, instance_id);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
/* Validate version */
if (version_id > se->version_id) {
error_report("savevm: unsupported version %d for '%s' v%d",
version_id, idstr, se->version_id);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
/* Add entry */
@@ -1061,14 +1056,14 @@ int qemu_loadvm_state(QEMUFile *f)
le->se = se;
le->section_id = section_id;
le->version_id = version_id;
- QLIST_INSERT_HEAD(&loadvm_handlers, le, entry);
+ QLIST_INSERT_HEAD(loadvm_handlers, le, entry);
ret = vmstate_load(f, le->se, le->version_id);
if (ret < 0) {
error_report("qemu: error while loading state for"
"instance 0x%x of device '%s'",
instance_id, idstr);
- goto out;
+ return ret;
}
break;
case QEMU_VM_SECTION_PART:
@@ -1076,47 +1071,84 @@ int qemu_loadvm_state(QEMUFile *f)
section_id = qemu_get_be32(f);
DPRINTF("QEMU_VM_SECTION_PART/END entry for id=%d", section_id);
- QLIST_FOREACH(le, &loadvm_handlers, entry) {
+ QLIST_FOREACH(le, loadvm_handlers, entry) {
if (le->section_id == section_id) {
break;
}
}
if (le == NULL) {
error_report("Unknown savevm section %d", section_id);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
ret = vmstate_load(f, le->se, le->version_id);
if (ret < 0) {
error_report("qemu: error while loading state section"
" id %d (%s)", section_id, le->se->idstr);
- goto out;
+ return ret;
}
DPRINTF("QEMU_VM_SECTION_PART/END done for id=%d", section_id);
break;
case QEMU_VM_COMMAND:
- ret = loadvm_process_command(f);
- if (ret < 0) {
- goto out;
+ ret = loadvm_process_command(f, loadvm_handlers);
+ DPRINTF("%s QEMU_VM_COMMAND ret: %d", __func__, ret);
+ if ((ret < 0) || (ret & LOADVM_EXITCODE_QUITLOOP)) {
+ return ret;
}
+ exitcode |= ret; /* Lets us pass flags up to the parent */
break;
default:
error_report("Unknown savevm section type %d", section_type);
- ret = -EINVAL;
- goto out;
+ return -EINVAL;
}
}
DPRINTF("qemu_loadvm_state loop: exited loop");
- cpu_synchronize_all_post_init();
+ if (exitcode & LOADVM_EXITCODE_QUITPARENT) {
+ DPRINTF("loadvm_handlers_state_main: End of loop with QUITPARENT");
+ exitcode &= ~LOADVM_EXITCODE_QUITPARENT;
+ exitcode &= LOADVM_EXITCODE_QUITLOOP;
+ }
+
+ return exitcode;
+}
+
+int qemu_loadvm_state(QEMUFile *f)
+{
+ LoadStateEntry *le, *new_le;
+ unsigned int v;
+ int ret;
+
+ if (qemu_savevm_state_blocked(NULL)) {
+ return -EINVAL;
+ }
+
+ v = qemu_get_be32(f);
+ if (v != QEMU_VM_FILE_MAGIC) {
+ return -EINVAL;
+ }
- ret = 0;
+ v = qemu_get_be32(f);
+ if (v == QEMU_VM_FILE_VERSION_COMPAT) {
+ error_report("SaveVM v2 format is obsolete and don't work anymore");
+ return -ENOTSUP;
+ }
+ if (v != QEMU_VM_FILE_VERSION) {
+ return -ENOTSUP;
+ }
+
+ QLIST_INIT(&loadvm_handlers);
+ ret = qemu_loadvm_state_main(f, &loadvm_handlers);
-out:
- QLIST_FOREACH_SAFE(le, &loadvm_handlers, entry, new_le) {
- QLIST_REMOVE(le, entry);
- g_free(le);
+ if (ret == 0) {
+ cpu_synchronize_all_post_init();
+ }
+
+ if ((ret < 0) || !(ret & LOADVM_EXITCODE_KEEPHANDLERS)) {
+ QLIST_FOREACH_SAFE(le, &loadvm_handlers, entry, new_le) {
+ QLIST_REMOVE(le, entry);
+ g_free(le);
+ }
}
if (ret == 0) {
--
1.9.3
next prev parent reply other threads:[~2014-08-11 14:30 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 14:29 [Qemu-devel] [PATCH v2 00/43] Postcopy implementation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 01/43] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-08-11 18:29 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 02/43] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 03/43] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 04/43] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 05/43] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 06/43] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-08-12 2:13 ` [Qemu-devel] 答复: " chenliang (T)
2014-08-12 9:36 ` [Qemu-devel] ????: [PATCH v2 06/43] Return path: socket_writev_buffer:?Block " Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 07/43] Migration commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 08/43] Return path: Control commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 09/43] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 10/43] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 11/43] qemu_loadvm errors and debug Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 12/43] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` Dr. David Alan Gilbert (git) [this message]
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 14/43] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-08-11 16:47 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 15/43] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 16/43] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 17/43] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 18/43] Allow savevm handlers to state whether they could go into postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 19/43] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-08-12 5:32 ` zhanghailiang
2014-08-12 8:18 ` Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 20/43] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2014-08-11 17:01 ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 21/43] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 22/43] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 23/43] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 24/43] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 25/43] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 26/43] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 27/43] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 28/43] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 29/43] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 30/43] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 31/43] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 32/43] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 33/43] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 34/43] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 35/43] Add assertion to check migration_dirty_pages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 36/43] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 37/43] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 38/43] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 39/43] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 40/43] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 41/43] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 42/43] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 43/43] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-08-11 17:19 ` Eric Blake
2014-08-11 17:58 ` Dr. David Alan Gilbert
2014-08-12 1:50 ` [Qemu-devel] [PATCH v2 00/43] Postcopy implementation zhanghailiang
2014-08-12 9:19 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407767399-3030-14-git-send-email-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=aarcange@redhat.com \
--cc=lilei@linux.vnet.ibm.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=yamahata@private.email.ne.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).