qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org
Cc: aarcange@redhat.com, yamahata@private.email.ne.jp,
	lilei@linux.vnet.ibm.com, quintela@redhat.com
Subject: [Qemu-devel] [PATCH v2 15/43] Add wrappers and handlers for sending/receiving the postcopy-ram migration messages.
Date: Mon, 11 Aug 2014 15:29:31 +0100	[thread overview]
Message-ID: <1407767399-3030-16-git-send-email-dgilbert@redhat.com> (raw)
In-Reply-To: <1407767399-3030-1-git-send-email-dgilbert@redhat.com>

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

Add state variable showing current incoming postcopy state.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 include/migration/migration.h |   8 ++
 include/sysemu/sysemu.h       |  23 +++
 savevm.c                      | 324 ++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)

diff --git a/include/migration/migration.h b/include/migration/migration.h
index ad02602..e3f4494 100644
--- a/include/migration/migration.h
+++ b/include/migration/migration.h
@@ -62,6 +62,14 @@ typedef struct MigrationState MigrationState;
 struct MigrationIncomingState {
     QEMUFile *file;
 
+    volatile enum {
+        POSTCOPY_RAM_INCOMING_NONE = 0,  /* Initial state - no postcopy */
+        POSTCOPY_RAM_INCOMING_ADVISE,
+        POSTCOPY_RAM_INCOMING_LISTENING,
+        POSTCOPY_RAM_INCOMING_RUNNING,
+        POSTCOPY_RAM_INCOMING_END
+    } postcopy_ram_state;
+
     QEMUFile *return_path;
     QemuMutex      rp_mutex;    /* We send replies from multiple threads */
 };
diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
index b25e938..0641cc2 100644
--- a/include/sysemu/sysemu.h
+++ b/include/sysemu/sysemu.h
@@ -87,6 +87,16 @@ enum qemu_vm_cmd {
     QEMU_VM_CMD_OPENRP,        /* Tell the dest to open the Return path */
     QEMU_VM_CMD_REQACK,        /* Request an ACK on the RP */
 
+    QEMU_VM_CMD_POSTCOPY_RAM_ADVISE = 20,  /* Prior to any page transfers, just
+                                              warn we might want to do PC */
+    QEMU_VM_CMD_POSTCOPY_RAM_DISCARD,      /* A list of pages to discard that
+                                              were previously sent during
+                                              precopy but are dirty. */
+    QEMU_VM_CMD_POSTCOPY_RAM_LISTEN,       /* Start listening for incoming
+                                              pages as it's running. */
+    QEMU_VM_CMD_POSTCOPY_RAM_RUN,          /* Start execution */
+    QEMU_VM_CMD_POSTCOPY_RAM_END,          /* Postcopy is finished. */
+
     QEMU_VM_CMD_AFTERLASTVALID
 };
 
@@ -97,6 +107,19 @@ int qemu_savevm_state_iterate(QEMUFile *f);
 void qemu_savevm_state_complete(QEMUFile *f);
 void qemu_savevm_state_cancel(void);
 uint64_t qemu_savevm_state_pending(QEMUFile *f, uint64_t max_size);
+void qemu_savevm_command_send(QEMUFile *f, enum qemu_vm_cmd command,
+                              uint16_t len, uint8_t *data);
+void qemu_savevm_send_reqack(QEMUFile *f, uint32_t value);
+void qemu_savevm_send_openrp(QEMUFile *f);
+void qemu_savevm_send_postcopy_ram_advise(QEMUFile *f);
+void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
+                                           uint16_t len, uint8_t offset,
+                                           uint64_t *pagelist);
+
+void qemu_savevm_send_postcopy_ram_listen(QEMUFile *f);
+void qemu_savevm_send_postcopy_ram_run(QEMUFile *f);
+void qemu_savevm_send_postcopy_ram_end(QEMUFile *f, uint8_t status);
+
 int qemu_loadvm_state(QEMUFile *f);
 
 /* SLIRP */
diff --git a/savevm.c b/savevm.c
index 7236232..13d975d 100644
--- a/savevm.c
+++ b/savevm.c
@@ -33,12 +33,14 @@
 #include "qemu/timer.h"
 #include "audio/audio.h"
 #include "migration/migration.h"
+#include "migration/postcopy-ram.h"
 #include "qemu/sockets.h"
 #include "qemu/queue.h"
 #include "sysemu/cpus.h"
 #include "exec/memory.h"
 #include "qmp-commands.h"
 #include "trace.h"
+#include "qemu/bitops.h"
 #include "qemu/iov.h"
 #include "block/snapshot.h"
 #include "block/qapi.h"
@@ -624,6 +626,83 @@ void qemu_savevm_send_openrp(QEMUFile *f)
 {
     qemu_savevm_command_send(f, QEMU_VM_CMD_OPENRP, 0, NULL);
 }
+
+/* Send prior to any RAM transfer */
+void qemu_savevm_send_postcopy_ram_advise(QEMUFile *f)
+{
+    DPRINTF("send postcopy-ram-advise");
+    qemu_savevm_command_send(f, QEMU_VM_CMD_POSTCOPY_RAM_ADVISE, 0, NULL);
+}
+
+/* Prior to running, to cause pages that have been dirtied after precopy
+ * started to be discarded on the destination.
+ * CMD_POSTCOPY_RAM_DISCARD consist of:
+ *  2 byte header (filled in by qemu_savevm_send_postcopy_ram_discard)
+ *      byte   version (0)
+ *      byte   offset into the 1st data word containing 1st page of RAMBlock
+ *      byte   Length of name field
+ *  n x byte   RAM block name (NOT 0 terminated)
+ *  n x
+ *      be64   Page addresses for start of an invalidation range
+ *      be64   mask of 64 pages, '1' to discard'
+ *
+ *  Hopefully this is pretty sparse so we don't get too many entries,
+ *  and using the mask should deal with most pagesize differences
+ *  just ending up as a single full mask
+ *
+ *  The mask is always 64bits irrespective of the long size
+ *
+ *  Note the destination is free to discard *more* than we've asked
+ *  (e.g. rounding up to some convenient page size)
+ *
+ *  name:  RAMBlock name that these entries are part of
+ *  len: Number of page entries
+ *  pagelist: one 8byte header word (empty) then len*(start,mask) pairs
+ *            The caller must have already put these into be64 format
+ */
+void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
+                                           uint16_t len, uint8_t offset,
+                                           uint64_t *pagelist)
+{
+    uint8_t *buf;
+    uint16_t tmplen;
+
+    DPRINTF("send postcopy-ram-discard");
+    buf = g_malloc0(len*16 + strlen(name) + 3);
+    buf[0] = 0; /* Version */
+    buf[1] = offset;
+    assert(strlen(name) < 256);
+    buf[2] = strlen(name);
+    memcpy(buf+3, name, strlen(name));
+    tmplen = 3+strlen(name);
+    memcpy(buf + tmplen, pagelist, len*16);
+
+    qemu_savevm_command_send(f, QEMU_VM_CMD_POSTCOPY_RAM_DISCARD,
+                             tmplen + len*16, buf);
+    g_free(buf);
+}
+
+/* Get the destination into a state where it can receive page data. */
+void qemu_savevm_send_postcopy_ram_listen(QEMUFile *f)
+{
+    DPRINTF("send postcopy-ram-listen");
+    qemu_savevm_command_send(f, QEMU_VM_CMD_POSTCOPY_RAM_LISTEN, 0, NULL);
+}
+
+/* Kick the destination into running */
+void qemu_savevm_send_postcopy_ram_run(QEMUFile *f)
+{
+    DPRINTF("send postcopy-ram-run");
+    qemu_savevm_command_send(f, QEMU_VM_CMD_POSTCOPY_RAM_RUN, 0, NULL);
+}
+
+/* End of postcopy - with a status byte; 0 is good, anything else is a fail */
+void qemu_savevm_send_postcopy_ram_end(QEMUFile *f, uint8_t status)
+{
+    DPRINTF("send postcopy-ram-end");
+    qemu_savevm_command_send(f, QEMU_VM_CMD_POSTCOPY_RAM_END, 1, &status);
+}
+
 bool qemu_savevm_state_blocked(Error **errp)
 {
     SaveStateEntry *se;
@@ -935,6 +1014,220 @@ static LoadStateEntry_Head loadvm_handlers =
 static int qemu_loadvm_state_main(QEMUFile *f,
                                   LoadStateEntry_Head *loadvm_handlers);
 
+/* ------ incoming postcopy-ram messages ------ */
+/* 'advise' arrives before any RAM transfers just to tell us that a postcopy
+ * *might* happen - it might be skipped if precopy transferred everything
+ * quickly.
+ */
+static int loadvm_postcopy_ram_handle_advise(MigrationIncomingState *mis)
+{
+    DPRINTF("%s", __func__);
+    if (mis->postcopy_ram_state != POSTCOPY_RAM_INCOMING_NONE) {
+        error_report("CMD_POSTCOPY_RAM_ADVISE in wrong postcopy state (%d)",
+                     mis->postcopy_ram_state);
+        return -1;
+    }
+
+    /* Check this host can do it */
+    if (postcopy_ram_hosttest()) {
+        return -1;
+    }
+
+    if (ram_postcopy_incoming_init(mis)) {
+        return -1;
+    }
+
+    mis->postcopy_ram_state = POSTCOPY_RAM_INCOMING_ADVISE;
+
+    /*
+     * Postcopy will be sending lots of small messages along the return path
+     * that it needs quick answers to.
+     */
+    socket_set_nodelay(qemu_get_fd(mis->return_path));
+
+    return 0;
+}
+
+/* After postcopy we will be told to throw some pages away since they're
+ * dirty and will have to be demand fetched.  Must happen before CPU is
+ * started.
+ * There can be 0..many of these messages, each encoding multiple pages.
+ * Bits set in the message represent a page in the source VMs bitmap, but
+ * since the guest/target page sizes can be different on s/d then we have
+ * to convert.
+ */
+static int loadvm_postcopy_ram_handle_discard(MigrationIncomingState *mis,
+                                              uint16_t len)
+{
+    int tmp;
+    const int source_target_page_bits = 12; /* TODO */
+    unsigned int first_bit_offset;
+    char ramid[256];
+
+    DPRINTF("%s", __func__);
+
+    if (mis->postcopy_ram_state != POSTCOPY_RAM_INCOMING_ADVISE) {
+        error_report("CMD_POSTCOPY_RAM_DISCARD in wrong postcopy state (%d)",
+                     mis->postcopy_ram_state);
+        return -1;
+    }
+    /* We're expecting a
+     *    3 byte header,
+     *    a RAM ID string
+     *    then at least 1 2x8 byte chunks
+    */
+    if (len < 19) {
+        error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
+        return -1;
+    }
+
+    tmp = qemu_get_byte(mis->file);
+    if (tmp != 0) {
+        error_report("CMD_POSTCOPY_RAM_DISCARD invalid version (%d)", tmp);
+        return -1;
+    }
+    first_bit_offset = qemu_get_byte(mis->file);
+
+    if (qemu_get_counted_string(mis->file, (uint8_t *)ramid)) {
+        error_report("CMD_POSTCOPY_RAM_DISCARD Failed to read RAMBlock ID");
+        return -1;
+    }
+
+    len -= 3+strlen(ramid);
+    if (len & 15) {
+        error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
+        return -1;
+    }
+    while (len) {
+        uint64_t startaddr, mask;
+        /*
+         * We now have pairs of address, mask
+         *   The address is in multiples of 64bit chunks in the source bitmask
+         *     ie multiply by 64 and then source-target-page-size to get bytes
+         *     '0' represents the chunk in which the RAMBlock starts for the
+         *     source and 'first_bit_offset' (see above) represents which bit in
+         *     that first word corresponds to the first page of the RAMBlock
+         *   The mask is 64 bits of bitmask starting at that offset into the
+         *   RAMBlock.
+         *
+         *   For example:
+         *      an address of 1 with a first_bit_offset of 12 indicates
+         *      page 1*64 - 12 = page 52 for bit 0 of the mask
+         *      Source guarantees that for address 0, bits <first_bit_offset
+         *      shall be 0
+         */
+        startaddr = qemu_get_be64(mis->file) * 64;
+        mask = qemu_get_be64(mis->file);
+
+        len -= 16;
+
+        while (mask) {
+            /* mask= .....?10...0 */
+            /*             ^fs    */
+            int firstset = ctz64(mask);
+
+            /* tmp64=.....?11...1 */
+            /*             ^fs    */
+            uint64_t tmp64 = mask | ((((uint64_t)1)<<firstset)-1);
+
+            /* mask= .?01..10...0 */
+            /*         ^fz ^fs    */
+            int firstzero = cto64(tmp64);
+
+            if ((startaddr == 0) && (firstset < first_bit_offset)) {
+                error_report("CMD_POSTCOPY_RAM_DISCARD bad data; bit set"
+                               " prior to block; block=%s offset=%d"
+                               " firstset=%d\n", ramid, first_bit_offset,
+                               firstzero);
+                return -1;
+            }
+            /*
+             * we know there must be at least 1 bit set due to the loop entry
+             * If there is no 0 firstzero will be 64
+             */
+            /* TODO - ram_discard_range gets added in a later patch
+            int ret = ram_discard_range(mis, ramid, source_target_page_bits,
+                                startaddr + firstset - first_bit_offset,
+                                startaddr + (firstzero - 1) - first_bit_offset);
+             */
+            ret = -1; /* TODO */
+            if (ret) {
+                return ret;
+            }
+
+            /* mask= .?0000000000 */
+            /*         ^fz ^fs    */
+            if (firstzero != 64) {
+                mask &= (((uint64_t)-1) << firstzero);
+            } else {
+                mask = 0;
+            }
+        }
+    }
+    DPRINTF("%s finished", __func__);
+
+    return 0;
+}
+
+/* After this message we must be able to immediately receive page data */
+static int loadvm_postcopy_ram_handle_listen(MigrationIncomingState *mis)
+{
+    DPRINTF("%s", __func__);
+    if (mis->postcopy_ram_state != POSTCOPY_RAM_INCOMING_ADVISE) {
+        error_report("CMD_POSTCOPY_RAM_LISTEN in wrong postcopy state (%d)",
+                     mis->postcopy_ram_state);
+        return -1;
+    }
+
+    mis->postcopy_ram_state = POSTCOPY_RAM_INCOMING_LISTENING;
+
+    /*
+     * Sensitise RAM - can now generate requests for blocks that don't exist
+     * However, at this point the CPU shouldn't be running, and the IO
+     * shouldn't be doing anything yet so don't actually expect requests
+     */
+    if (postcopy_ram_enable_notify(mis)) {
+        return -1;
+    }
+
+    /* TODO start up the postcopy listening thread */
+    return 0;
+}
+
+/* After all discards we can start running and asking for pages */
+static int loadvm_postcopy_ram_handle_run(MigrationIncomingState *mis)
+{
+    DPRINTF("%s", __func__);
+    if (mis->postcopy_ram_state != POSTCOPY_RAM_INCOMING_LISTENING) {
+        error_report("CMD_POSTCOPY_RAM_RUN in wrong postcopy state (%d)",
+                     mis->postcopy_ram_state);
+        return -1;
+    }
+
+    mis->postcopy_ram_state = POSTCOPY_RAM_INCOMING_RUNNING;
+    if (autostart) {
+        /* Hold onto your hats, starting the CPU */
+        vm_start();
+    } else {
+        /* leave it paused and let management decide when to start the CPU */
+        runstate_set(RUN_STATE_PAUSED);
+    }
+
+    return 0;
+}
+
+/* The end - with a byte from the source which can tell us to fail. */
+static int loadvm_postcopy_ram_handle_end(MigrationIncomingState *mis)
+{
+    DPRINTF("%s", __func__);
+    if (mis->postcopy_ram_state == POSTCOPY_RAM_INCOMING_NONE) {
+        error_report("CMD_POSTCOPY_RAM_END in wrong postcopy state (%d)",
+                     mis->postcopy_ram_state);
+        return -1;
+    }
+    return -1; /* TODO - expecting 1 byte good/fail */
+}
+
 static int loadvm_process_command_simple_lencheck(const char *name,
                                                   unsigned int actual,
                                                   unsigned int expected)
@@ -997,6 +1290,37 @@ static int loadvm_process_command(QEMUFile *f,
         migrate_send_rp_ack(mis, tmp32);
         break;
 
+    case QEMU_VM_CMD_POSTCOPY_RAM_ADVISE:
+        if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_RAM_ADVISE",
+                                                   len, 0)) {
+            return -1;
+        }
+        return loadvm_postcopy_ram_handle_advise(mis);
+
+    case QEMU_VM_CMD_POSTCOPY_RAM_DISCARD:
+        return loadvm_postcopy_ram_handle_discard(mis, len);
+
+    case QEMU_VM_CMD_POSTCOPY_RAM_LISTEN:
+        if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_RAM_LISTEN",
+                                                   len, 0)) {
+            return -1;
+        }
+        return loadvm_postcopy_ram_handle_listen(mis);
+
+    case QEMU_VM_CMD_POSTCOPY_RAM_RUN:
+        if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_RAM_RUN",
+                                                   len, 0)) {
+            return -1;
+        }
+        return loadvm_postcopy_ram_handle_run(mis);
+
+    case QEMU_VM_CMD_POSTCOPY_RAM_END:
+        if (loadvm_process_command_simple_lencheck("CMD_POSTCOPY_RAM_END",
+                                                   len, 1)) {
+            return -1;
+        }
+        return loadvm_postcopy_ram_handle_end(mis);
+
     default:
         error_report("VM_COMMAND 0x%x unknown (len 0x%x)", com, len);
         return -1;
-- 
1.9.3

  parent reply	other threads:[~2014-08-11 14:30 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-11 14:29 [Qemu-devel] [PATCH v2 00/43] Postcopy implementation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 01/43] qemu_ram_foreach_block: pass up error value, and down the ramblock name Dr. David Alan Gilbert (git)
2014-08-11 18:29   ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 02/43] improve DPRINTF macros, add to savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 03/43] Add qemu_get_counted_string to read a string prefixed by a count byte Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 04/43] Create MigrationIncomingState Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 05/43] Return path: Open a return path on QEMUFile for sockets Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 06/43] Return path: socket_writev_buffer: Block even on non-blocking fd's Dr. David Alan Gilbert (git)
2014-08-12  2:13   ` [Qemu-devel] 答复: " chenliang (T)
2014-08-12  9:36     ` [Qemu-devel] ????: [PATCH v2 06/43] Return path: socket_writev_buffer:?Block " Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 07/43] Migration commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 08/43] Return path: Control commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 09/43] Return path: Send responses from destination to source Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 10/43] Return path: Source handling of return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 11/43] qemu_loadvm errors and debug Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 12/43] ram_debug_dump_bitmap: Dump a migration bitmap as text Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 13/43] Rework loadvm path for subloops Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 14/43] Add migration-capability boolean for postcopy-ram Dr. David Alan Gilbert (git)
2014-08-11 16:47   ` Eric Blake
2014-08-11 14:29 ` Dr. David Alan Gilbert (git) [this message]
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 16/43] QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 17/43] migrate_init: Call from savevm Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 18/43] Allow savevm handlers to state whether they could go into postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 19/43] postcopy: OS support test Dr. David Alan Gilbert (git)
2014-08-12  5:32   ` zhanghailiang
2014-08-12  8:18     ` Dr. David Alan Gilbert
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 20/43] migrate_start_postcopy: Command to trigger transition to postcopy Dr. David Alan Gilbert (git)
2014-08-11 17:01   ` Eric Blake
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 21/43] MIG_STATE_POSTCOPY_ACTIVE: Add new migration state Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 22/43] qemu_savevm_state_complete: Postcopy changes Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 23/43] Postcopy: Maintain sentmap during postcopy pre phase Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 24/43] Postcopy page-map-incoming (PMI) structure Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 25/43] postcopy: Add incoming_init/cleanup functions Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 26/43] postcopy: Incoming initialisation Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 27/43] postcopy: ram_enable_notify to switch on userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 28/43] Postcopy: postcopy_start Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 29/43] Postcopy: Rework migration thread for postcopy mode Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 30/43] mig fd_connect: open return path Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 31/43] Postcopy: Create a fault handler thread before marking the ram as userfault Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 32/43] Page request: Add MIG_RPCOMM_REQPAGES reverse command Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 33/43] Page request: Process incoming page request Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 34/43] Page request: Consume pages off the post-copy queue Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 35/43] Add assertion to check migration_dirty_pages Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 36/43] postcopy_ram.c: place_page and helpers Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 37/43] Postcopy: Use helpers to map pages during migration Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 38/43] qemu_ram_block_from_host Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 39/43] Postcopy; Handle userfault requests Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 40/43] Start up a postcopy/listener thread ready for incoming page data Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 41/43] postcopy: Wire up loadvm_postcopy_ram_handle_{run, end} commands Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 42/43] End of migration for postcopy Dr. David Alan Gilbert (git)
2014-08-11 14:29 ` [Qemu-devel] [PATCH v2 43/43] Start documenting how postcopy works Dr. David Alan Gilbert (git)
2014-08-11 17:19   ` Eric Blake
2014-08-11 17:58     ` Dr. David Alan Gilbert
2014-08-12  1:50 ` [Qemu-devel] [PATCH v2 00/43] Postcopy implementation zhanghailiang
2014-08-12  9:19   ` Dr. David Alan Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407767399-3030-16-git-send-email-dgilbert@redhat.com \
    --to=dgilbert@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=lilei@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    --cc=yamahata@private.email.ne.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).