From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive
Date: Fri, 15 Aug 2014 18:06:18 +0100 [thread overview]
Message-ID: <1408122422-13935-12-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
It is now called only after the set_inactive callback. Put the two together.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/ide/ahci.c | 9 ---------
hw/ide/atapi.c | 2 +-
hw/ide/core.c | 12 ++++--------
hw/ide/internal.h | 6 +++---
hw/ide/macio.c | 1 -
hw/ide/pci.c | 19 +++++++------------
6 files changed, 15 insertions(+), 34 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 14677ec..0ec5627 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1102,14 +1102,6 @@ static int ahci_dma_set_unit(IDEDMA *dma, int unit)
return 0;
}
-static int ahci_dma_add_status(IDEDMA *dma, int status)
-{
- AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
- DPRINTF(ad->port_no, "set status: %x\n", status);
-
- return 0;
-}
-
static void ahci_async_cmd_done(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
@@ -1140,7 +1132,6 @@ static const IDEDMAOps ahci_dma_ops = {
.prepare_buf = ahci_dma_prepare_buf,
.rw_buf = ahci_dma_rw_buf,
.set_unit = ahci_dma_set_unit,
- .add_status = ahci_dma_add_status,
.async_cmd_done = ahci_async_cmd_done,
.restart_cb = ahci_dma_restart_cb,
};
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 46ed3f5..3b419b3 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -355,7 +355,7 @@ static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret)
eot:
bdrv_acct_done(s->bs, &s->acct);
- ide_set_inactive(s);
+ ide_set_inactive(s, false);
}
/* start a CD-CDROM read command with DMA */
diff --git a/hw/ide/core.c b/hw/ide/core.c
index aa561ae..24f24ce 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -594,11 +594,11 @@ static void ide_async_cmd_done(IDEState *s)
}
}
-void ide_set_inactive(IDEState *s)
+void ide_set_inactive(IDEState *s, bool more)
{
s->bus->dma->aiocb = NULL;
if (s->bus->dma->ops->set_inactive) {
- s->bus->dma->ops->set_inactive(s->bus->dma);
+ s->bus->dma->ops->set_inactive(s->bus->dma, more);
}
ide_async_cmd_done(s);
}
@@ -608,7 +608,7 @@ void ide_dma_error(IDEState *s)
ide_transfer_stop(s);
s->error = ABRT_ERR;
s->status = READY_STAT | ERR_STAT;
- ide_set_inactive(s);
+ ide_set_inactive(s, false);
ide_set_irq(s->bus);
}
@@ -719,10 +719,7 @@ eot:
if (s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) {
bdrv_acct_done(s->bs, &s->acct);
}
- ide_set_inactive(s);
- if (stay_active) {
- s->bus->dma->ops->add_status(s->bus->dma, BM_STATUS_DMAING);
- }
+ ide_set_inactive(s, stay_active);
}
static void ide_sector_start_dma(IDEState *s, enum ide_dma_cmd dma_cmd)
@@ -2224,7 +2221,6 @@ static const IDEDMAOps ide_dma_nop_ops = {
.prepare_buf = ide_nop_int,
.rw_buf = ide_nop_int,
.set_unit = ide_nop_int,
- .add_status = ide_nop_int,
.restart_cb = ide_nop_restart,
};
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 2fe1f0a..b35e52c 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -322,6 +322,7 @@ typedef void EndTransferFunc(IDEState *);
typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *);
typedef void DMAVoidFunc(IDEDMA *);
typedef int DMAIntFunc(IDEDMA *, int);
+typedef void DMAStopFunc(IDEDMA *, bool);
typedef void DMARestartFunc(void *, int, RunState);
struct unreported_events {
@@ -431,8 +432,7 @@ struct IDEDMAOps {
DMAIntFunc *prepare_buf;
DMAIntFunc *rw_buf;
DMAIntFunc *set_unit;
- DMAIntFunc *add_status;
- DMAVoidFunc *set_inactive;
+ DMAStopFunc *set_inactive;
DMAVoidFunc *async_cmd_done;
DMARestartFunc *restart_cb;
DMAVoidFunc *reset;
@@ -565,7 +565,7 @@ void ide_flush_cache(IDEState *s);
void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
EndTransferFunc *end_transfer_func);
void ide_transfer_stop(IDEState *s);
-void ide_set_inactive(IDEState *s);
+void ide_set_inactive(IDEState *s, bool more);
BlockDriverAIOCB *ide_issue_trim(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockDriverCompletionFunc *cb, void *opaque);
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index b7cedb6..b0c0d40 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -569,7 +569,6 @@ static const IDEDMAOps dbdma_ops = {
.prepare_buf = ide_nop_int,
.rw_buf = ide_nop_int,
.set_unit = ide_nop_int,
- .add_status = ide_nop_int,
.restart_cb = ide_nop_restart,
};
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 1ee8c0a..73267a4 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -152,21 +152,17 @@ static int bmdma_set_unit(IDEDMA *dma, int unit)
return 0;
}
-static int bmdma_add_status(IDEDMA *dma, int status)
+static void bmdma_set_inactive(IDEDMA *dma, bool more)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
- bm->status |= status;
- return 0;
-}
-
-static void bmdma_set_inactive(IDEDMA *dma)
-{
- BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
-
- bm->status &= ~BM_STATUS_DMAING;
bm->dma_cb = NULL;
bm->unit = -1;
+ if (more) {
+ bm->status |= BM_STATUS_DMAING;
+ } else {
+ bm->status &= ~BM_STATUS_DMAING;
+ }
}
static void bmdma_restart_dma(BMDMAState *bm, enum ide_dma_cmd dma_cmd)
@@ -241,7 +237,7 @@ static void bmdma_cancel(BMDMAState *bm)
{
if (bm->status & BM_STATUS_DMAING) {
/* cancel DMA request */
- bmdma_set_inactive(&bm->dma);
+ bmdma_set_inactive(&bm->dma, false);
}
}
@@ -498,7 +494,6 @@ static const struct IDEDMAOps bmdma_ops = {
.prepare_buf = bmdma_prepare_buf,
.rw_buf = bmdma_rw_buf,
.set_unit = bmdma_set_unit,
- .add_status = bmdma_add_status,
.set_inactive = bmdma_set_inactive,
.restart_cb = bmdma_restart_cb,
.reset = bmdma_reset,
--
1.9.3
next prev parent reply other threads:[~2014-08-15 17:07 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix small memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408122422-13935-12-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).