From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done
Date: Fri, 15 Aug 2014 18:06:23 +0100 [thread overview]
Message-ID: <1408122422-13935-17-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
AHCI has code to fill in the D2H FIS trigger the IRQ all over the place.
Centralize this in a single cmd_done callback by generalizing the existing
async_cmd_done callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/ide/ahci.c | 16 +++-------------
hw/ide/atapi.c | 2 +-
hw/ide/core.c | 20 +++++++++++---------
hw/ide/internal.h | 2 +-
4 files changed, 16 insertions(+), 24 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index e1f27bd..b40ec06 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -969,11 +969,6 @@ static int handle_cmd(AHCIState *s, int port, int slot)
/* We're ready to process the command in FIS byte 2. */
ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
-
- if ((s->dev[port].port.ifs[0].status & (READY_STAT|DRQ_STAT|BUSY_STAT)) ==
- READY_STAT) {
- ahci_write_fis_d2h(&s->dev[port], cmd_fis);
- }
}
out:
@@ -1036,11 +1031,6 @@ out:
}
s->end_transfer_func(s);
-
- if (!(s->status & DRQ_STAT)) {
- /* done with DMA */
- ahci_trigger_irq(ad->hba, ad, PORT_IRQ_D2H_REG_FIS);
- }
}
static void ahci_start_dma(IDEDMA *dma, IDEState *s,
@@ -1102,11 +1092,11 @@ static int ahci_dma_set_unit(IDEDMA *dma, int unit)
return 0;
}
-static void ahci_async_cmd_done(IDEDMA *dma)
+static void ahci_cmd_done(IDEDMA *dma)
{
AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
- DPRINTF(ad->port_no, "async cmd done\n");
+ DPRINTF(ad->port_no, "cmd done\n");
/* update d2h status */
ahci_write_fis_d2h(ad, NULL);
@@ -1132,7 +1122,7 @@ static const IDEDMAOps ahci_dma_ops = {
.prepare_buf = ahci_dma_prepare_buf,
.rw_buf = ahci_dma_rw_buf,
.set_unit = ahci_dma_set_unit,
- .async_cmd_done = ahci_async_cmd_done,
+ .cmd_done = ahci_cmd_done,
.restart_cb = ahci_dma_restart_cb,
};
diff --git a/hw/ide/atapi.c b/hw/ide/atapi.c
index 3b419b3..3d92b52 100644
--- a/hw/ide/atapi.c
+++ b/hw/ide/atapi.c
@@ -174,9 +174,9 @@ void ide_atapi_cmd_reply_end(IDEState *s)
#endif
if (s->packet_transfer_size <= 0) {
/* end of transfer */
- ide_transfer_stop(s);
s->status = READY_STAT | SEEK_STAT;
s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD;
+ ide_transfer_stop(s);
ide_set_irq(s->bus);
#ifdef DEBUG_IDE_ATAPI
printf("status=0x%x\n", s->status);
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 91a17e6..bdb0a80 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -440,12 +440,20 @@ void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
}
}
+static void ide_cmd_done(IDEState *s)
+{
+ if (s->bus->dma->ops->cmd_done) {
+ s->bus->dma->ops->cmd_done(s->bus->dma);
+ }
+}
+
void ide_transfer_stop(IDEState *s)
{
s->end_transfer_func = ide_transfer_stop;
s->data_ptr = s->io_buffer;
s->data_end = s->io_buffer;
s->status &= ~DRQ_STAT;
+ ide_cmd_done(s);
}
int64_t ide_get_sector(IDEState *s)
@@ -588,20 +596,13 @@ static void dma_buf_commit(IDEState *s)
qemu_sglist_destroy(&s->sg);
}
-static void ide_async_cmd_done(IDEState *s)
-{
- if (s->bus->dma->ops->async_cmd_done) {
- s->bus->dma->ops->async_cmd_done(s->bus->dma);
- }
-}
-
void ide_set_inactive(IDEState *s, bool more)
{
s->bus->dma->aiocb = NULL;
if (s->bus->dma->ops->set_inactive) {
s->bus->dma->ops->set_inactive(s->bus->dma, more);
}
- ide_async_cmd_done(s);
+ ide_cmd_done(s);
}
void ide_dma_error(IDEState *s)
@@ -849,7 +850,7 @@ static void ide_flush_cb(void *opaque, int ret)
bdrv_acct_done(s->bs, &s->acct);
s->status = READY_STAT | SEEK_STAT;
- ide_async_cmd_done(s);
+ ide_cmd_done(s);
ide_set_irq(s->bus);
}
@@ -1773,6 +1774,7 @@ void ide_exec_cmd(IDEBus *bus, uint32_t val)
s->status |= SEEK_STAT;
}
+ ide_cmd_done(s);
ide_set_irq(s->bus);
}
}
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index b919e96..5c19f79 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -433,7 +433,7 @@ struct IDEDMAOps {
DMAIntFunc *rw_buf;
DMAIntFunc *set_unit;
DMAStopFunc *set_inactive;
- DMAVoidFunc *async_cmd_done;
+ DMAVoidFunc *cmd_done;
DMARestartFunc *restart_cb;
DMAVoidFunc *reset;
};
--
1.9.3
next prev parent reply other threads:[~2014-08-15 17:07 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix small memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408122422-13935-17-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).