From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size
Date: Fri, 15 Aug 2014 18:06:30 +0100 [thread overview]
Message-ID: <1408122422-13935-24-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>
From: John Snow <jsnow@redhat.com>
This patch allows qpci_iomap to return the size of the
BAR mapping that it created, to allow driver applications
(e.g, ahci-test) to make determinations about the suitability
or the mapping size, or in the specific case of AHCI, how
many ports are supported by the HBA.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
tests/ide-test.c | 2 +-
tests/libqos/pci-pc.c | 5 ++++-
tests/libqos/pci.c | 4 ++--
tests/libqos/pci.h | 4 ++--
tests/usb-hcd-ehci-test.c | 2 +-
5 files changed, 10 insertions(+), 7 deletions(-)
diff --git a/tests/ide-test.c b/tests/ide-test.c
index 151ef30..e2b4efc 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -146,7 +146,7 @@ static QPCIDevice *get_pci_device(uint16_t *bmdma_base)
g_assert(device_id == PCI_DEVICE_ID_INTEL_82371SB_1);
/* Map bmdma BAR */
- *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4);
+ *bmdma_base = (uint16_t)(uintptr_t) qpci_iomap(dev, 4, NULL);
qpci_device_enable(dev);
diff --git a/tests/libqos/pci-pc.c b/tests/libqos/pci-pc.c
index f5d6469..0609294 100644
--- a/tests/libqos/pci-pc.c
+++ b/tests/libqos/pci-pc.c
@@ -144,7 +144,7 @@ static void qpci_pc_config_writel(QPCIBus *bus, int devfn, uint8_t offset, uint3
outl(0xcfc, value);
}
-static void *qpci_pc_iomap(QPCIBus *bus, QPCIDevice *dev, int barno)
+static void *qpci_pc_iomap(QPCIBus *bus, QPCIDevice *dev, int barno, uint64_t *sizeptr)
{
QPCIBusPC *s = container_of(bus, QPCIBusPC, bus);
static const int bar_reg_map[] = {
@@ -173,6 +173,9 @@ static void *qpci_pc_iomap(QPCIBus *bus, QPCIDevice *dev, int barno)
if (size == 0) {
return NULL;
}
+ if (sizeptr) {
+ *sizeptr = size;
+ }
if (io_type == PCI_BASE_ADDRESS_SPACE_IO) {
uint16_t loc;
diff --git a/tests/libqos/pci.c b/tests/libqos/pci.c
index c9a0b91..ce0b308 100644
--- a/tests/libqos/pci.c
+++ b/tests/libqos/pci.c
@@ -138,9 +138,9 @@ void qpci_io_writel(QPCIDevice *dev, void *data, uint32_t value)
dev->bus->io_writel(dev->bus, data, value);
}
-void *qpci_iomap(QPCIDevice *dev, int barno)
+void *qpci_iomap(QPCIDevice *dev, int barno, uint64_t *sizeptr)
{
- return dev->bus->iomap(dev->bus, dev, barno);
+ return dev->bus->iomap(dev->bus, dev, barno, sizeptr);
}
void qpci_iounmap(QPCIDevice *dev, void *data)
diff --git a/tests/libqos/pci.h b/tests/libqos/pci.h
index 3439431..9ee048b 100644
--- a/tests/libqos/pci.h
+++ b/tests/libqos/pci.h
@@ -41,7 +41,7 @@ struct QPCIBus
void (*config_writel)(QPCIBus *bus, int devfn,
uint8_t offset, uint32_t value);
- void *(*iomap)(QPCIBus *bus, QPCIDevice *dev, int barno);
+ void *(*iomap)(QPCIBus *bus, QPCIDevice *dev, int barno, uint64_t *sizeptr);
void (*iounmap)(QPCIBus *bus, void *data);
};
@@ -74,7 +74,7 @@ void qpci_io_writeb(QPCIDevice *dev, void *data, uint8_t value);
void qpci_io_writew(QPCIDevice *dev, void *data, uint16_t value);
void qpci_io_writel(QPCIDevice *dev, void *data, uint32_t value);
-void *qpci_iomap(QPCIDevice *dev, int barno);
+void *qpci_iomap(QPCIDevice *dev, int barno, uint64_t *sizeptr);
void qpci_iounmap(QPCIDevice *dev, void *data);
#endif
diff --git a/tests/usb-hcd-ehci-test.c b/tests/usb-hcd-ehci-test.c
index bcdf62f..c990492 100644
--- a/tests/usb-hcd-ehci-test.c
+++ b/tests/usb-hcd-ehci-test.c
@@ -34,7 +34,7 @@ static void pci_init_one(struct qhc *hc, uint32_t devfn, int bar)
hc->dev = qpci_device_find(pcibus, devfn);
g_assert(hc->dev != NULL);
qpci_device_enable(hc->dev);
- hc->base = qpci_iomap(hc->dev, bar);
+ hc->base = qpci_iomap(hc->dev, bar, NULL);
g_assert(hc->base != NULL);
}
--
1.9.3
next prev parent reply other threads:[~2014-08-15 17:08 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408122422-13935-24-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).