From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>,
Peter Maydell <peter.maydell@linaro.org>,
Jeff Cody <jcody@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
"Denis V. Lunev" <den@openvz.org>
Subject: [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support
Date: Fri, 15 Aug 2014 18:06:45 +0100 [thread overview]
Message-ID: <1408122422-13935-39-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>
From: "Denis V. Lunev" <den@openvz.org>
Parallels has released in the recent updates of Parallels Server 5/6
new addition to his image format. Images with signature WithouFreSpacExt
have offsets in the catalog coded not as offsets in sectors (multiple
of 512 bytes) but offsets coded in blocks (i.e. header->tracks * 512)
In this case all 64 bits of header->nb_sectors are used for image size.
This patch implements support of this for qemu-img and also adds specific
check for an incorrect image. Images with block size greater than
INT_MAX/513 are not supported. The biggest available Parallels image
cluster size in the field is 1 Mb. Thus this limit will not hurt
anyone.
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Jeff Cody <jcody@redhat.com>
CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
block/parallels.c | 25 ++++++++++++++++++++-----
1 file changed, 20 insertions(+), 5 deletions(-)
diff --git a/block/parallels.c b/block/parallels.c
index f9e18b4..1774ab8 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -30,6 +30,7 @@
/**************************************************************/
#define HEADER_MAGIC "WithoutFreeSpace"
+#define HEADER_MAGIC2 "WithouFreSpacExt"
#define HEADER_VERSION 2
#define HEADER_SIZE 64
@@ -54,6 +55,8 @@ typedef struct BDRVParallelsState {
unsigned int catalog_size;
unsigned int tracks;
+
+ unsigned int off_multiplier;
} BDRVParallelsState;
static int parallels_probe(const uint8_t *buf, int buf_size, const char *filename)
@@ -63,7 +66,8 @@ static int parallels_probe(const uint8_t *buf, int buf_size, const char *filenam
if (buf_size < HEADER_SIZE)
return 0;
- if (!memcmp(ph->magic, HEADER_MAGIC, 16) &&
+ if ((!memcmp(ph->magic, HEADER_MAGIC, 16) ||
+ !memcmp(ph->magic, HEADER_MAGIC2, 16)) &&
(le32_to_cpu(ph->version) == HEADER_VERSION))
return 100;
@@ -85,21 +89,31 @@ static int parallels_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
+ bs->total_sectors = le64_to_cpu(ph.nb_sectors);
+
if (le32_to_cpu(ph.version) != HEADER_VERSION) {
goto fail_format;
}
- if (memcmp(ph.magic, HEADER_MAGIC, 16)) {
+ if (!memcmp(ph.magic, HEADER_MAGIC, 16)) {
+ s->off_multiplier = 1;
+ bs->total_sectors = 0xffffffff & bs->total_sectors;
+ } else if (!memcmp(ph.magic, HEADER_MAGIC2, 16)) {
+ s->off_multiplier = le32_to_cpu(ph.tracks);
+ } else {
goto fail_format;
}
- bs->total_sectors = 0xffffffff & le64_to_cpu(ph.nb_sectors);
-
s->tracks = le32_to_cpu(ph.tracks);
if (s->tracks == 0) {
error_setg(errp, "Invalid image: Zero sectors per track");
ret = -EINVAL;
goto fail;
}
+ if (s->tracks > INT32_MAX/513) {
+ error_setg(errp, "Invalid image: Too big cluster");
+ ret = -EFBIG;
+ goto fail;
+ }
s->catalog_size = le32_to_cpu(ph.catalog_entries);
if (s->catalog_size > INT_MAX / 4) {
@@ -143,7 +157,8 @@ static int64_t seek_to_sector(BlockDriverState *bs, int64_t sector_num)
/* not allocated */
if ((index > s->catalog_size) || (s->catalog_bitmap[index] == 0))
return -1;
- return (uint64_t)(s->catalog_bitmap[index] + offset) * 512;
+ return
+ ((uint64_t)s->catalog_bitmap[index] * s->off_multiplier + offset) * 512;
}
static int parallels_read(BlockDriverState *bs, int64_t sector_num,
--
1.9.3
next prev parent reply other threads:[~2014-08-15 17:08 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix small memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408122422-13935-39-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=den@openvz.org \
--cc=jcody@redhat.com \
--cc=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).