From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks
Date: Fri, 15 Aug 2014 18:06:12 +0100 [thread overview]
Message-ID: <1408122422-13935-6-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>
From: Paolo Bonzini <pbonzini@redhat.com>
Drop the unused return value and make the callback optional.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
hw/ide/ahci.c | 6 ------
hw/ide/core.c | 5 +++--
hw/ide/internal.h | 3 ++-
hw/ide/macio.c | 1 -
hw/ide/pci.c | 4 +---
5 files changed, 6 insertions(+), 13 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 604152a..273712f 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -1147,11 +1147,6 @@ static void ahci_dma_restart_cb(void *opaque, int running, RunState state)
{
}
-static int ahci_dma_reset(IDEDMA *dma)
-{
- return 0;
-}
-
static const IDEDMAOps ahci_dma_ops = {
.start_dma = ahci_start_dma,
.start_transfer = ahci_start_transfer,
@@ -1162,7 +1157,6 @@ static const IDEDMAOps ahci_dma_ops = {
.set_inactive = ahci_dma_set_inactive,
.async_cmd_done = ahci_async_cmd_done,
.restart_cb = ahci_dma_restart_cb,
- .reset = ahci_dma_reset,
};
void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports)
diff --git a/hw/ide/core.c b/hw/ide/core.c
index 79985f9..4183a3a 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -2088,7 +2088,9 @@ void ide_bus_reset(IDEBus *bus)
}
/* reset dma provider too */
- bus->dma->ops->reset(bus->dma);
+ if (bus->dma->ops->reset) {
+ bus->dma->ops->reset(bus->dma);
+ }
}
static bool ide_cd_is_tray_open(void *opaque)
@@ -2226,7 +2228,6 @@ static const IDEDMAOps ide_dma_nop_ops = {
.add_status = ide_nop_int,
.set_inactive = ide_nop,
.restart_cb = ide_nop_restart,
- .reset = ide_nop,
};
static IDEDMA ide_dma_nop = {
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 0567a52..6cca46f 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -320,6 +320,7 @@ typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
typedef void EndTransferFunc(IDEState *);
typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *);
+typedef void DMAVoidFunc(IDEDMA *);
typedef int DMAFunc(IDEDMA *);
typedef int DMAIntFunc(IDEDMA *, int);
typedef void DMARestartFunc(void *, int, RunState);
@@ -435,7 +436,7 @@ struct IDEDMAOps {
DMAFunc *set_inactive;
DMAFunc *async_cmd_done;
DMARestartFunc *restart_cb;
- DMAFunc *reset;
+ DMAVoidFunc *reset;
};
struct IDEDMA {
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index c14a1dd..ca39e3f 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -578,7 +578,6 @@ static const IDEDMAOps dbdma_ops = {
.add_status = ide_nop_int,
.set_inactive = ide_nop,
.restart_cb = ide_nop_restart,
- .reset = ide_nop,
};
static void macio_ide_realizefn(DeviceState *dev, Error **errp)
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 6257a21..c24496a 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -247,7 +247,7 @@ static void bmdma_cancel(BMDMAState *bm)
}
}
-static int bmdma_reset(IDEDMA *dma)
+static void bmdma_reset(IDEDMA *dma)
{
BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
@@ -264,8 +264,6 @@ static int bmdma_reset(IDEDMA *dma)
bm->cur_prd_len = 0;
bm->sector_num = 0;
bm->nsector = 0;
-
- return 0;
}
static int bmdma_start_transfer(IDEDMA *dma)
--
1.9.3
next prev parent reply other threads:[~2014-08-15 17:07 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix small memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408122422-13935-6-git-send-email-stefanha@redhat.com \
--to=stefanha@redhat.com \
--cc=jsnow@redhat.com \
--cc=pbonzini@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).