qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	John Snow <jsnow@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Subject: [Qemu-devel] [PULL 08/55] ide: simplify start_transfer callbacks
Date: Fri, 15 Aug 2014 18:06:15 +0100	[thread overview]
Message-ID: <1408122422-13935-9-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1408122422-13935-1-git-send-email-stefanha@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

Drop the unused return value and make the callback optional.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/ide/ahci.c     |  4 +---
 hw/ide/core.c     | 10 +++-------
 hw/ide/internal.h |  3 +--
 hw/ide/macio.c    |  6 ------
 hw/ide/pci.c      |  6 ------
 5 files changed, 5 insertions(+), 24 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index e494503..adbac3d 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -991,7 +991,7 @@ out:
 }
 
 /* DMA dev <-> ram */
-static int ahci_start_transfer(IDEDMA *dma)
+static void ahci_start_transfer(IDEDMA *dma)
 {
     AHCIDevice *ad = DO_UPCAST(AHCIDevice, dma, dma);
     IDEState *s = &ad->port.ifs[0];
@@ -1041,8 +1041,6 @@ out:
         /* done with DMA */
         ahci_trigger_irq(ad->hba, ad, PORT_IRQ_STAT_DSS);
     }
-
-    return 0;
 }
 
 static void ahci_start_dma(IDEDMA *dma, IDEState *s,
diff --git a/hw/ide/core.c b/hw/ide/core.c
index d52a6f6..e5ddecb 100644
--- a/hw/ide/core.c
+++ b/hw/ide/core.c
@@ -434,7 +434,9 @@ void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
     if (!(s->status & ERR_STAT)) {
         s->status |= DRQ_STAT;
     }
-    s->bus->dma->ops->start_transfer(s->bus->dma);
+    if (s->bus->dma->ops->start_transfer) {
+        s->bus->dma->ops->start_transfer(s->bus->dma);
+    }
 }
 
 void ide_transfer_stop(IDEState *s)
@@ -2207,11 +2209,6 @@ static void ide_nop_start(IDEDMA *dma, IDEState *s,
 {
 }
 
-static int ide_nop(IDEDMA *dma)
-{
-    return 0;
-}
-
 static int ide_nop_int(IDEDMA *dma, int x)
 {
     return 0;
@@ -2223,7 +2220,6 @@ static void ide_nop_restart(void *opaque, int x, RunState y)
 
 static const IDEDMAOps ide_dma_nop_ops = {
     .start_dma      = ide_nop_start,
-    .start_transfer = ide_nop,
     .prepare_buf    = ide_nop_int,
     .rw_buf         = ide_nop_int,
     .set_unit       = ide_nop_int,
diff --git a/hw/ide/internal.h b/hw/ide/internal.h
index 940dd45..64fbf2f 100644
--- a/hw/ide/internal.h
+++ b/hw/ide/internal.h
@@ -321,7 +321,6 @@ typedef void EndTransferFunc(IDEState *);
 
 typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *);
 typedef void DMAVoidFunc(IDEDMA *);
-typedef int DMAFunc(IDEDMA *);
 typedef int DMAIntFunc(IDEDMA *, int);
 typedef void DMARestartFunc(void *, int, RunState);
 
@@ -428,7 +427,7 @@ struct IDEState {
 
 struct IDEDMAOps {
     DMAStartFunc *start_dma;
-    DMAFunc *start_transfer;
+    DMAVoidFunc *start_transfer;
     DMAIntFunc *prepare_buf;
     DMAIntFunc *rw_buf;
     DMAIntFunc *set_unit;
diff --git a/hw/ide/macio.c b/hw/ide/macio.c
index 0e26bac..b7cedb6 100644
--- a/hw/ide/macio.c
+++ b/hw/ide/macio.c
@@ -545,11 +545,6 @@ static void macio_ide_reset(DeviceState *dev)
     ide_bus_reset(&d->bus);
 }
 
-static int ide_nop(IDEDMA *dma)
-{
-    return 0;
-}
-
 static int ide_nop_int(IDEDMA *dma, int x)
 {
     return 0;
@@ -571,7 +566,6 @@ static void ide_dbdma_start(IDEDMA *dma, IDEState *s,
 
 static const IDEDMAOps dbdma_ops = {
     .start_dma      = ide_dbdma_start,
-    .start_transfer = ide_nop,
     .prepare_buf    = ide_nop_int,
     .rw_buf         = ide_nop_int,
     .set_unit       = ide_nop_int,
diff --git a/hw/ide/pci.c b/hw/ide/pci.c
index 9dc3cc5..1ee8c0a 100644
--- a/hw/ide/pci.c
+++ b/hw/ide/pci.c
@@ -264,11 +264,6 @@ static void bmdma_reset(IDEDMA *dma)
     bm->nsector = 0;
 }
 
-static int bmdma_start_transfer(IDEDMA *dma)
-{
-    return 0;
-}
-
 static void bmdma_irq(void *opaque, int n, int level)
 {
     BMDMAState *bm = opaque;
@@ -500,7 +495,6 @@ void pci_ide_create_devs(PCIDevice *dev, DriveInfo **hd_table)
 
 static const struct IDEDMAOps bmdma_ops = {
     .start_dma = bmdma_start_dma,
-    .start_transfer = bmdma_start_transfer,
     .prepare_buf = bmdma_prepare_buf,
     .rw_buf = bmdma_rw_buf,
     .set_unit = bmdma_set_unit,
-- 
1.9.3

  parent reply	other threads:[~2014-08-15 17:07 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-15 17:06 [Qemu-devel] [PULL 00/55] Block patches Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 01/55] blkdebug: report errors on flush too Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 02/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 03/55] ide-test: add test for werror=stop Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 04/55] ide: stash aiocb for flushes Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 05/55] ide: simplify reset callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 06/55] ide: simplify set_inactive callbacks Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 07/55] ide: simplify async_cmd_done callbacks Stefan Hajnoczi
2014-08-15 17:06 ` Stefan Hajnoczi [this message]
2014-08-15 17:06 ` [Qemu-devel] [PULL 09/55] ide: wrap start_dma callback Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 10/55] ide: remove wrong setting of BM_STATUS_INT Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 11/55] ide: fold add_status callback into set_inactive Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 12/55] ide: move BM_STATUS bits to pci.[ch] Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 13/55] ide: move retry constants out of BM_STATUS_* namespace Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 14/55] ahci: remove duplicate PORT_IRQ_* constants Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 15/55] ide: stop PIO transfer on errors Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 16/55] ide: make all commands go through cmd_done Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 17/55] ahci: construct PIO Setup FIS for PIO commands Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 18/55] q35: Enable the ioapic device to be seen by qtest Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 19/55] qtest: Adding qtest_memset and qmemset Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 20/55] libqos: Correct memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 21/55] libqtest: Correct small " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 22/55] libqos: Fixes a " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 23/55] libqos: allow qpci_iomap to return BAR mapping size Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 24/55] qtest/ide: Fix small memory leak Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 25/55] cmd646: add constants for CNTRL register access Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 26/55] cmd646: synchronise DMA interrupt status with UDMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 27/55] cmd646: switch cmd646_update_irq() to accept PCIDevice instead of PCIIDEState Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 28/55] cmd646: allow MRDMODE interrupt status bits clearing from PCI config space Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 29/55] cmd646: synchronise UDMA interrupt status with DMA interrupt status Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 30/55] qemu-char: using qemu_set_nonblock() instead of fcntl(O_NONBLOCK) Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 31/55] channel-posix: " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 32/55] dataplane: print why starting failed Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 33/55] dataplane: fail notifier setting gracefully Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 34/55] dataplane: stop trying on notifier error Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 35/55] parallels: extend parallels format header with actual data values Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 36/55] parallels: replace tabs with spaces in block/parallels.c Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 37/55] parallels: split check for parallels format in parallels_open Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 38/55] parallels: 2TB+ parallels images support Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 39/55] qemu-options: add missing -drive discard option to cmdline help Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 40/55] ide: Fix segfault when flushing a device that doesn't exist Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 41/55] libqtest: add QTEST_LOG for debugging qtest testcases Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 42/55] libqos: Correct mask to align size to PAGE_SIZE in malloc-pc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 43/55] libqos: Change free function called in malloc Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 44/55] virtio-blk: Correct bug in support for flexible descriptor layout Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 45/55] ide: only constrain read/write requests to drive size, not other types Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 46/55] docs: Specification for the image fuzzer Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 47/55] image-fuzzer: Tool for fuzz tests execution Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 48/55] image-fuzzer: Fuzzing functions for qcow2 images Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 49/55] image-fuzzer: Generator of fuzzed " Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 50/55] image-fuzzer: Public API for image-fuzzer/runner/runner.py Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 51/55] docs: Expand the list of supported image elements with L1/L2 tables Stefan Hajnoczi
2014-08-15 17:06 ` [Qemu-devel] [PULL 52/55] image-fuzzer: Add fuzzing functions for L1/L2 table entries Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 53/55] image-fuzzer: Add generators of L1/L2 tables Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 54/55] image-fuzzer: Reduce number of generator functions in __init__ Stefan Hajnoczi
2014-08-15 17:07 ` [Qemu-devel] [PULL 55/55] qcow2: fix new_blocks double-free in alloc_refcount_block() Stefan Hajnoczi
2014-08-18 11:54 ` [Qemu-devel] [PULL 00/55] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1408122422-13935-9-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).