From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, rth@twiddle.net
Subject: [Qemu-devel] [PATCH v6 12/15] target-tricore: Add instructions of SBR opcode format
Date: Fri, 22 Aug 2014 17:52:33 +0100 [thread overview]
Message-ID: <1408726356-14420-13-git-send-email-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <1408726356-14420-1-git-send-email-kbastian@mail.uni-paderborn.de>
Add instructions of SBR opcode format.
Add gen_loop micro-op generator function.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
---
v5 -> v6:
- SBR_JEQ: Negate condition.
target-tricore/translate.c | 66 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+), 1 deletion(-)
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index 3ca3211..d2419ba 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -388,6 +388,18 @@ static inline void gen_branch_condi(DisasContext *ctx, TCGCond cond, TCGv r1,
tcg_temp_free(temp);
}
+static void gen_loop(DisasContext *ctx, int r1, int32_t offset)
+{
+ int l1;
+ l1 = gen_new_label();
+
+ tcg_gen_subi_tl(cpu_gpr_a[r1], cpu_gpr_a[r1], 1);
+ tcg_gen_brcondi_tl(TCG_COND_EQ, cpu_gpr_a[r1], -1, l1);
+ gen_goto_tb(ctx, 1, ctx->pc + offset);
+ gen_set_label(l1);
+ gen_goto_tb(ctx, 0, ctx->next_pc);
+}
+
static void gen_compute_branch(DisasContext *ctx, uint32_t opc, int r1,
int r2 , int32_t constant , int32_t offset)
{
@@ -429,8 +441,44 @@ static void gen_compute_branch(DisasContext *ctx, uint32_t opc, int r1,
gen_branch_condi(ctx, TCG_COND_NE, temp, 0, offset);
tcg_temp_free(temp);
break;
+/* SBR-format jumps */
+ case OPC1_16_SBR_JEQ:
+ gen_branch_cond(ctx, TCG_COND_EQ, cpu_gpr_d[r1], cpu_gpr_d[15],
+ offset);
+ break;
+ case OPC1_16_SBR_JNE:
+ gen_branch_cond(ctx, TCG_COND_NE, cpu_gpr_d[r1], cpu_gpr_d[15],
+ offset);
+ break;
+ case OPC1_16_SBR_JNZ:
+ gen_branch_condi(ctx, TCG_COND_NE, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JNZ_A:
+ gen_branch_condi(ctx, TCG_COND_NE, cpu_gpr_a[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JGEZ:
+ gen_branch_condi(ctx, TCG_COND_GE, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JGTZ:
+ gen_branch_condi(ctx, TCG_COND_GT, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JLEZ:
+ gen_branch_condi(ctx, TCG_COND_LE, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JLTZ:
+ gen_branch_condi(ctx, TCG_COND_LT, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JZ:
+ gen_branch_condi(ctx, TCG_COND_EQ, cpu_gpr_d[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_JZ_A:
+ gen_branch_condi(ctx, TCG_COND_EQ, cpu_gpr_a[r1], 0, offset);
+ break;
+ case OPC1_16_SBR_LOOP:
+ gen_loop(ctx, r1, offset * 2 - 32);
+ break;
default:
- printf("Branch Error at %x\n", ctx->pc);
+ printf("Branch Error at %x\n", ctx->pc);
}
ctx->bstate = BS_BRANCH;
}
@@ -752,6 +800,22 @@ static void decode_16Bit_opc(CPUTRICOREState *env, DisasContext *ctx)
const16 = MASK_OP_SBRN_N(ctx->opcode);
gen_compute_branch(ctx, op1, 0, 0, const16, address);
break;
+/* SBR-format */
+ case OPC1_16_SBR_JEQ:
+ case OPC1_16_SBR_JGEZ:
+ case OPC1_16_SBR_JGTZ:
+ case OPC1_16_SBR_JLEZ:
+ case OPC1_16_SBR_JLTZ:
+ case OPC1_16_SBR_JNE:
+ case OPC1_16_SBR_JNZ:
+ case OPC1_16_SBR_JNZ_A:
+ case OPC1_16_SBR_JZ:
+ case OPC1_16_SBR_JZ_A:
+ case OPC1_16_SBR_LOOP:
+ r1 = MASK_OP_SBR_S2(ctx->opcode);
+ address = MASK_OP_SBR_DISP4(ctx->opcode);
+ gen_compute_branch(ctx, op1, r1, 0, 0, address);
+ break;
}
}
--
2.1.0
next prev parent reply other threads:[~2014-08-22 15:50 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-22 16:52 [Qemu-devel] [PATCH v6 00/15] TriCore architecture guest implementation Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 01/15] target-tricore: Add target stubs and qom-cpu Bastian Koppelmann
2014-08-29 14:18 ` Peter Maydell
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 02/15] target-tricore: Add board for systemmode Bastian Koppelmann
2014-08-29 14:30 ` Peter Maydell
2014-08-29 19:00 ` Bastian Koppelmann
2014-08-29 18:08 ` Peter Maydell
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 03/15] target-tricore: Add softmmu support Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 04/15] target-tricore: Add initialization for translation and activate target Bastian Koppelmann
2014-08-29 14:33 ` Peter Maydell
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 05/15] target-tricore: Add masks and opcodes for decoding Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 06/15] target-tricore: Add instructions of SRC opcode format Bastian Koppelmann
2014-08-22 20:57 ` Richard Henderson
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 07/15] target-tricore: Add instructions of SRR " Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 08/15] target-tricore: Add instructions of SSR " Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 09/15] target-tricore: Add instructions of SRRS and SLRO " Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 10/15] target-tricore: Add instructions of SB " Bastian Koppelmann
2014-08-22 20:59 ` Richard Henderson
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 11/15] target-tricore: Add instructions of SBC and SBRN " Bastian Koppelmann
2014-08-22 21:08 ` Richard Henderson
2014-08-22 16:52 ` Bastian Koppelmann [this message]
2014-08-22 21:06 ` [Qemu-devel] [PATCH v6 12/15] target-tricore: Add instructions of SBR " Richard Henderson
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 13/15] target-tricore: Add instructions of SC " Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 14/15] target-tricore: Add instructions of SLR, SSRO and SRO " Bastian Koppelmann
2014-08-22 16:52 ` [Qemu-devel] [PATCH v6 15/15] target-tricore: Add instructions of SR " Bastian Koppelmann
2014-08-22 21:08 ` Richard Henderson
2014-08-26 19:48 ` [Qemu-devel] [PATCH v6 00/15] TriCore architecture guest implementation Richard Henderson
2014-08-29 14:39 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408726356-14420-13-git-send-email-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).