* [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr
@ 2014-08-26 6:38 john.liuli
2014-08-26 6:38 ` [Qemu-devel] [PATCH v2 2/2] device_tree.c: dump all err mesages with error_report john.liuli
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: john.liuli @ 2014-08-26 6:38 UTC (permalink / raw)
To: peter.crosthwaite; +Cc: qemu-trivial, Li Liu, qemu-devel
From: Li Liu <john.liuli@huawei.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Li Liu <john.liuli@huawei.com>
---
changes v1 -> v2:
1) fix indent issue as peter suggested.
2) dump all err mesages with error_report.
---
device_tree.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/device_tree.c b/device_tree.c
index ca83504..9d47195 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -20,6 +20,7 @@
#include "config.h"
#include "qemu-common.h"
+#include "qemu/error-report.h"
#include "sysemu/device_tree.h"
#include "sysemu/sysemu.h"
#include "hw/loader.h"
@@ -79,8 +80,8 @@ void *load_device_tree(const char *filename_path, int *sizep)
*sizep = 0;
dt_size = get_image_size(filename_path);
if (dt_size < 0) {
- printf("Unable to get size of device tree file '%s'\n",
- filename_path);
+ error_report("Unable to get size of device tree file '%s'",
+ filename_path);
goto fail;
}
@@ -92,21 +93,21 @@ void *load_device_tree(const char *filename_path, int *sizep)
dt_file_load_size = load_image(filename_path, fdt);
if (dt_file_load_size < 0) {
- printf("Unable to open device tree file '%s'\n",
- filename_path);
+ error_report("Unable to open device tree file '%s'",
+ filename_path);
goto fail;
}
ret = fdt_open_into(fdt, fdt, dt_size);
if (ret) {
- printf("Unable to copy device tree in memory\n");
+ error_report("Unable to copy device tree in memory");
goto fail;
}
/* Check sanity of device tree */
if (fdt_check_header(fdt)) {
- printf ("Device tree file loaded into memory is invalid: %s\n",
- filename_path);
+ error_report("Device tree file loaded into memory is invalid: %s",
+ filename_path);
goto fail;
}
*sizep = dt_size;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Qemu-devel] [PATCH v2 2/2] device_tree.c: dump all err mesages with error_report
2014-08-26 6:38 [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr john.liuli
@ 2014-08-26 6:38 ` john.liuli
2014-08-28 11:37 ` [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr Li Liu
2014-08-29 16:23 ` [Qemu-devel] [Qemu-trivial] " Michael Tokarev
2 siblings, 0 replies; 5+ messages in thread
From: john.liuli @ 2014-08-26 6:38 UTC (permalink / raw)
To: peter.crosthwaite; +Cc: qemu-trivial, Li Liu, qemu-devel
From: Li Liu <john.liuli@huawei.com>
Signed-off-by: Li Liu <john.liuli@huawei.com>
---
device_tree.c | 40 ++++++++++++++++++++--------------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/device_tree.c b/device_tree.c
index 9d47195..df9eed9 100644
--- a/device_tree.c
+++ b/device_tree.c
@@ -60,13 +60,13 @@ void *create_device_tree(int *sizep)
}
ret = fdt_open_into(fdt, fdt, *sizep);
if (ret) {
- fprintf(stderr, "Unable to copy device tree in memory\n");
+ error_report("Unable to copy device tree in memory");
exit(1);
}
return fdt;
fail:
- fprintf(stderr, "%s Couldn't create dt: %s\n", __func__, fdt_strerror(ret));
+ error_report("%s Couldn't create dt: %s", __func__, fdt_strerror(ret));
exit(1);
}
@@ -124,8 +124,8 @@ static int findnode_nofail(void *fdt, const char *node_path)
offset = fdt_path_offset(fdt, node_path);
if (offset < 0) {
- fprintf(stderr, "%s Couldn't find node %s: %s\n", __func__, node_path,
- fdt_strerror(offset));
+ error_report("%s Couldn't find node %s: %s", __func__, node_path,
+ fdt_strerror(offset));
exit(1);
}
@@ -139,8 +139,8 @@ int qemu_fdt_setprop(void *fdt, const char *node_path,
r = fdt_setprop(fdt, findnode_nofail(fdt, node_path), property, val, size);
if (r < 0) {
- fprintf(stderr, "%s: Couldn't set %s/%s: %s\n", __func__, node_path,
- property, fdt_strerror(r));
+ error_report("%s: Couldn't set %s/%s: %s", __func__, node_path,
+ property, fdt_strerror(r));
exit(1);
}
@@ -154,8 +154,8 @@ int qemu_fdt_setprop_cell(void *fdt, const char *node_path,
r = fdt_setprop_cell(fdt, findnode_nofail(fdt, node_path), property, val);
if (r < 0) {
- fprintf(stderr, "%s: Couldn't set %s/%s = %#08x: %s\n", __func__,
- node_path, property, val, fdt_strerror(r));
+ error_report("%s: Couldn't set %s/%s = %#08x: %s", __func__,
+ node_path, property, val, fdt_strerror(r));
exit(1);
}
@@ -176,8 +176,8 @@ int qemu_fdt_setprop_string(void *fdt, const char *node_path,
r = fdt_setprop_string(fdt, findnode_nofail(fdt, node_path), property, string);
if (r < 0) {
- fprintf(stderr, "%s: Couldn't set %s/%s = %s: %s\n", __func__,
- node_path, property, string, fdt_strerror(r));
+ error_report("%s: Couldn't set %s/%s = %s: %s", __func__,
+ node_path, property, string, fdt_strerror(r));
exit(1);
}
@@ -194,8 +194,8 @@ const void *qemu_fdt_getprop(void *fdt, const char *node_path,
}
r = fdt_getprop(fdt, findnode_nofail(fdt, node_path), property, lenp);
if (!r) {
- fprintf(stderr, "%s: Couldn't get %s/%s: %s\n", __func__,
- node_path, property, fdt_strerror(*lenp));
+ error_report("%s: Couldn't get %s/%s: %s", __func__,
+ node_path, property, fdt_strerror(*lenp));
exit(1);
}
return r;
@@ -207,8 +207,8 @@ uint32_t qemu_fdt_getprop_cell(void *fdt, const char *node_path,
int len;
const uint32_t *p = qemu_fdt_getprop(fdt, node_path, property, &len);
if (len != 4) {
- fprintf(stderr, "%s: %s/%s not 4 bytes long (not a cell?)\n",
- __func__, node_path, property);
+ error_report("%s: %s/%s not 4 bytes long (not a cell?)",
+ __func__, node_path, property);
exit(1);
}
return be32_to_cpu(*p);
@@ -220,8 +220,8 @@ uint32_t qemu_fdt_get_phandle(void *fdt, const char *path)
r = fdt_get_phandle(fdt, findnode_nofail(fdt, path));
if (r == 0) {
- fprintf(stderr, "%s: Couldn't get phandle for %s: %s\n", __func__,
- path, fdt_strerror(r));
+ error_report("%s: Couldn't get phandle for %s: %s", __func__,
+ path, fdt_strerror(r));
exit(1);
}
@@ -266,8 +266,8 @@ int qemu_fdt_nop_node(void *fdt, const char *node_path)
r = fdt_nop_node(fdt, findnode_nofail(fdt, node_path));
if (r < 0) {
- fprintf(stderr, "%s: Couldn't nop node %s: %s\n", __func__, node_path,
- fdt_strerror(r));
+ error_report("%s: Couldn't nop node %s: %s", __func__, node_path,
+ fdt_strerror(r));
exit(1);
}
@@ -295,8 +295,8 @@ int qemu_fdt_add_subnode(void *fdt, const char *name)
retval = fdt_add_subnode(fdt, parent, basename);
if (retval < 0) {
- fprintf(stderr, "FDT: Failed to create subnode %s: %s\n", name,
- fdt_strerror(retval));
+ error_report("FDT: Failed to create subnode %s: %s", name,
+ fdt_strerror(retval));
exit(1);
}
--
1.7.9.5
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr
2014-08-26 6:38 [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr john.liuli
2014-08-26 6:38 ` [Qemu-devel] [PATCH v2 2/2] device_tree.c: dump all err mesages with error_report john.liuli
@ 2014-08-28 11:37 ` Li Liu
2014-08-28 13:15 ` Peter Crosthwaite
2014-08-29 16:23 ` [Qemu-devel] [Qemu-trivial] " Michael Tokarev
2 siblings, 1 reply; 5+ messages in thread
From: Li Liu @ 2014-08-28 11:37 UTC (permalink / raw)
To: Michael Tokarev; +Cc: qemu-trivial, peter.crosthwaite, qemu-devel, armbru
Could this patchset apply to -trivial, thank you!
Best regards,
Li.
On 2014/8/26 14:38, john.liuli wrote:
> From: Li Liu <john.liuli@huawei.com>
>
> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
> Signed-off-by: Li Liu <john.liuli@huawei.com>
> ---
> changes v1 -> v2:
> 1) fix indent issue as peter suggested.
> 2) dump all err mesages with error_report.
>
> ---
> device_tree.c | 15 ++++++++-------
> 1 file changed, 8 insertions(+), 7 deletions(-)
>
> diff --git a/device_tree.c b/device_tree.c
> index ca83504..9d47195 100644
> --- a/device_tree.c
> +++ b/device_tree.c
> @@ -20,6 +20,7 @@
>
> #include "config.h"
> #include "qemu-common.h"
> +#include "qemu/error-report.h"
> #include "sysemu/device_tree.h"
> #include "sysemu/sysemu.h"
> #include "hw/loader.h"
> @@ -79,8 +80,8 @@ void *load_device_tree(const char *filename_path, int *sizep)
> *sizep = 0;
> dt_size = get_image_size(filename_path);
> if (dt_size < 0) {
> - printf("Unable to get size of device tree file '%s'\n",
> - filename_path);
> + error_report("Unable to get size of device tree file '%s'",
> + filename_path);
> goto fail;
> }
>
> @@ -92,21 +93,21 @@ void *load_device_tree(const char *filename_path, int *sizep)
>
> dt_file_load_size = load_image(filename_path, fdt);
> if (dt_file_load_size < 0) {
> - printf("Unable to open device tree file '%s'\n",
> - filename_path);
> + error_report("Unable to open device tree file '%s'",
> + filename_path);
> goto fail;
> }
>
> ret = fdt_open_into(fdt, fdt, dt_size);
> if (ret) {
> - printf("Unable to copy device tree in memory\n");
> + error_report("Unable to copy device tree in memory");
> goto fail;
> }
>
> /* Check sanity of device tree */
> if (fdt_check_header(fdt)) {
> - printf ("Device tree file loaded into memory is invalid: %s\n",
> - filename_path);
> + error_report("Device tree file loaded into memory is invalid: %s",
> + filename_path);
> goto fail;
> }
> *sizep = dt_size;
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr
2014-08-28 11:37 ` [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr Li Liu
@ 2014-08-28 13:15 ` Peter Crosthwaite
0 siblings, 0 replies; 5+ messages in thread
From: Peter Crosthwaite @ 2014-08-28 13:15 UTC (permalink / raw)
To: Li Liu
Cc: qemu-trivial, Michael Tokarev, qemu-devel@nongnu.org Developers,
Markus Armbruster
Hi Li,
On Thu, Aug 28, 2014 at 9:37 PM, Li Liu <john.liuli@huawei.com> wrote:
> Could this patchset apply to -trivial, thank you!
>
Pings should generally only be sent after a week or so. My personal
rule is 7 calendar days from the original send before pinging.
Maintainers will often silently take short periods of time off-list
either for work or vacation.
Regards,
Peter
> Best regards,
> Li.
>
> On 2014/8/26 14:38, john.liuli wrote:
>> From: Li Liu <john.liuli@huawei.com>
>>
>> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
>> Signed-off-by: Li Liu <john.liuli@huawei.com>
>> ---
>> changes v1 -> v2:
>> 1) fix indent issue as peter suggested.
>> 2) dump all err mesages with error_report.
>>
>> ---
>> device_tree.c | 15 ++++++++-------
>> 1 file changed, 8 insertions(+), 7 deletions(-)
>>
>> diff --git a/device_tree.c b/device_tree.c
>> index ca83504..9d47195 100644
>> --- a/device_tree.c
>> +++ b/device_tree.c
>> @@ -20,6 +20,7 @@
>>
>> #include "config.h"
>> #include "qemu-common.h"
>> +#include "qemu/error-report.h"
>> #include "sysemu/device_tree.h"
>> #include "sysemu/sysemu.h"
>> #include "hw/loader.h"
>> @@ -79,8 +80,8 @@ void *load_device_tree(const char *filename_path, int *sizep)
>> *sizep = 0;
>> dt_size = get_image_size(filename_path);
>> if (dt_size < 0) {
>> - printf("Unable to get size of device tree file '%s'\n",
>> - filename_path);
>> + error_report("Unable to get size of device tree file '%s'",
>> + filename_path);
>> goto fail;
>> }
>>
>> @@ -92,21 +93,21 @@ void *load_device_tree(const char *filename_path, int *sizep)
>>
>> dt_file_load_size = load_image(filename_path, fdt);
>> if (dt_file_load_size < 0) {
>> - printf("Unable to open device tree file '%s'\n",
>> - filename_path);
>> + error_report("Unable to open device tree file '%s'",
>> + filename_path);
>> goto fail;
>> }
>>
>> ret = fdt_open_into(fdt, fdt, dt_size);
>> if (ret) {
>> - printf("Unable to copy device tree in memory\n");
>> + error_report("Unable to copy device tree in memory");
>> goto fail;
>> }
>>
>> /* Check sanity of device tree */
>> if (fdt_check_header(fdt)) {
>> - printf ("Device tree file loaded into memory is invalid: %s\n",
>> - filename_path);
>> + error_report("Device tree file loaded into memory is invalid: %s",
>> + filename_path);
>> goto fail;
>> }
>> *sizep = dt_size;
>>
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [Qemu-trivial] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr
2014-08-26 6:38 [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr john.liuli
2014-08-26 6:38 ` [Qemu-devel] [PATCH v2 2/2] device_tree.c: dump all err mesages with error_report john.liuli
2014-08-28 11:37 ` [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr Li Liu
@ 2014-08-29 16:23 ` Michael Tokarev
2 siblings, 0 replies; 5+ messages in thread
From: Michael Tokarev @ 2014-08-29 16:23 UTC (permalink / raw)
To: john.liuli, peter.crosthwaite; +Cc: qemu-trivial, qemu-devel
Applied both to -trivial tree, thank you!
/mjt
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-08-29 16:23 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-26 6:38 [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr john.liuli
2014-08-26 6:38 ` [Qemu-devel] [PATCH v2 2/2] device_tree.c: dump all err mesages with error_report john.liuli
2014-08-28 11:37 ` [Qemu-devel] [PATCH v2 1/2] device_tree.c: redirect load_device_tree err message to stderr Li Liu
2014-08-28 13:15 ` Peter Crosthwaite
2014-08-29 16:23 ` [Qemu-devel] [Qemu-trivial] " Michael Tokarev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).