qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 07/23] exec.c: Relax restrictions on watchpoint length and alignment
Date: Fri, 12 Sep 2014 14:23:38 +0100	[thread overview]
Message-ID: <1410528234-13545-8-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1410528234-13545-1-git-send-email-peter.maydell@linaro.org>

The current implementation of watchpoints requires that they
have a power of 2 length which is not greater than TARGET_PAGE_SIZE
and that their address is a multiple of their length. Watchpoints
on ARM don't fit these restrictions, so change the implementation
so they can be relaxed.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
---
 exec.c            | 44 +++++++++++++++++++++++++++++++-------------
 include/qom/cpu.h |  2 +-
 linux-user/main.c |  3 +--
 3 files changed, 33 insertions(+), 16 deletions(-)

diff --git a/exec.c b/exec.c
index 7dddcc8..f3e7fb6 100644
--- a/exec.c
+++ b/exec.c
@@ -582,12 +582,10 @@ int cpu_watchpoint_insert(CPUState *cpu, vaddr addr, vaddr len,
 int cpu_watchpoint_insert(CPUState *cpu, vaddr addr, vaddr len,
                           int flags, CPUWatchpoint **watchpoint)
 {
-    vaddr len_mask = ~(len - 1);
     CPUWatchpoint *wp;
 
-    /* sanity checks: allow power-of-2 lengths, deny unaligned watchpoints */
-    if ((len & (len - 1)) || (addr & ~len_mask) ||
-            len == 0 || len > TARGET_PAGE_SIZE) {
+    /* forbid ranges which are empty or run off the end of the address space */
+    if (len == 0 || (addr + len - 1) <= addr) {
         error_report("tried to set invalid watchpoint at %"
                      VADDR_PRIx ", len=%" VADDR_PRIu, addr, len);
         return -EINVAL;
@@ -595,7 +593,7 @@ int cpu_watchpoint_insert(CPUState *cpu, vaddr addr, vaddr len,
     wp = g_malloc(sizeof(*wp));
 
     wp->vaddr = addr;
-    wp->len_mask = len_mask;
+    wp->len = len;
     wp->flags = flags;
 
     /* keep all GDB-injected watchpoints in front */
@@ -616,11 +614,10 @@ int cpu_watchpoint_insert(CPUState *cpu, vaddr addr, vaddr len,
 int cpu_watchpoint_remove(CPUState *cpu, vaddr addr, vaddr len,
                           int flags)
 {
-    vaddr len_mask = ~(len - 1);
     CPUWatchpoint *wp;
 
     QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
-        if (addr == wp->vaddr && len_mask == wp->len_mask
+        if (addr == wp->vaddr && len == wp->len
                 && flags == (wp->flags & ~BP_WATCHPOINT_HIT)) {
             cpu_watchpoint_remove_by_ref(cpu, wp);
             return 0;
@@ -650,6 +647,27 @@ void cpu_watchpoint_remove_all(CPUState *cpu, int mask)
         }
     }
 }
+
+/* Return true if this watchpoint address matches the specified
+ * access (ie the address range covered by the watchpoint overlaps
+ * partially or completely with the address range covered by the
+ * access).
+ */
+static inline bool cpu_watchpoint_address_matches(CPUWatchpoint *wp,
+                                                  vaddr addr,
+                                                  vaddr len)
+{
+    /* We know the lengths are non-zero, but a little caution is
+     * required to avoid errors in the case where the range ends
+     * exactly at the top of the address space and so addr + len
+     * wraps round to zero.
+     */
+    vaddr wpend = wp->vaddr + wp->len - 1;
+    vaddr addrend = addr + len - 1;
+
+    return !(addr > wpend || wp->vaddr > addrend);
+}
+
 #endif
 
 /* Add a breakpoint.  */
@@ -861,7 +879,7 @@ hwaddr memory_region_section_get_iotlb(CPUState *cpu,
     /* Make accesses to pages with watchpoints go via the
        watchpoint trap routines.  */
     QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
-        if (vaddr == (wp->vaddr & TARGET_PAGE_MASK)) {
+        if (cpu_watchpoint_address_matches(wp, vaddr, TARGET_PAGE_SIZE)) {
             /* Avoid trapping reads of pages with a write breakpoint. */
             if ((prot & PAGE_WRITE) || (wp->flags & BP_MEM_READ)) {
                 iotlb = PHYS_SECTION_WATCH + paddr;
@@ -1625,7 +1643,7 @@ static const MemoryRegionOps notdirty_mem_ops = {
 };
 
 /* Generate a debug exception if a watchpoint has been hit.  */
-static void check_watchpoint(int offset, int len_mask, int flags)
+static void check_watchpoint(int offset, int len, int flags)
 {
     CPUState *cpu = current_cpu;
     CPUArchState *env = cpu->env_ptr;
@@ -1643,8 +1661,8 @@ static void check_watchpoint(int offset, int len_mask, int flags)
     }
     vaddr = (cpu->mem_io_vaddr & TARGET_PAGE_MASK) + offset;
     QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
-        if ((vaddr == (wp->vaddr & len_mask) ||
-             (vaddr & wp->len_mask) == wp->vaddr) && (wp->flags & flags)) {
+        if (cpu_watchpoint_address_matches(wp, vaddr, len)
+            && (wp->flags & flags)) {
             wp->flags |= BP_WATCHPOINT_HIT;
             if (!cpu->watchpoint_hit) {
                 cpu->watchpoint_hit = wp;
@@ -1670,7 +1688,7 @@ static void check_watchpoint(int offset, int len_mask, int flags)
 static uint64_t watch_mem_read(void *opaque, hwaddr addr,
                                unsigned size)
 {
-    check_watchpoint(addr & ~TARGET_PAGE_MASK, ~(size - 1), BP_MEM_READ);
+    check_watchpoint(addr & ~TARGET_PAGE_MASK, size, BP_MEM_READ);
     switch (size) {
     case 1: return ldub_phys(&address_space_memory, addr);
     case 2: return lduw_phys(&address_space_memory, addr);
@@ -1682,7 +1700,7 @@ static uint64_t watch_mem_read(void *opaque, hwaddr addr,
 static void watch_mem_write(void *opaque, hwaddr addr,
                             uint64_t val, unsigned size)
 {
-    check_watchpoint(addr & ~TARGET_PAGE_MASK, ~(size - 1), BP_MEM_WRITE);
+    check_watchpoint(addr & ~TARGET_PAGE_MASK, size, BP_MEM_WRITE);
     switch (size) {
     case 1:
         stb_phys(&address_space_memory, addr, val);
diff --git a/include/qom/cpu.h b/include/qom/cpu.h
index 1aafbf5..7c06f37 100644
--- a/include/qom/cpu.h
+++ b/include/qom/cpu.h
@@ -169,7 +169,7 @@ typedef struct CPUBreakpoint {
 
 typedef struct CPUWatchpoint {
     vaddr vaddr;
-    vaddr len_mask;
+    vaddr len;
     int flags; /* BP_* */
     QTAILQ_ENTRY(CPUWatchpoint) entry;
 } CPUWatchpoint;
diff --git a/linux-user/main.c b/linux-user/main.c
index 472a16d..483eb3f 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -3458,8 +3458,7 @@ CPUArchState *cpu_copy(CPUArchState *env)
         cpu_breakpoint_insert(new_cpu, bp->pc, bp->flags, NULL);
     }
     QTAILQ_FOREACH(wp, &cpu->watchpoints, entry) {
-        cpu_watchpoint_insert(new_cpu, wp->vaddr, (~wp->len_mask) + 1,
-                              wp->flags, NULL);
+        cpu_watchpoint_insert(new_cpu, wp->vaddr, wp->len, wp->flags, NULL);
     }
 #endif
 
-- 
1.9.1

  parent reply	other threads:[~2014-09-12 13:24 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-12 13:23 [Qemu-devel] [PULL 00/23] target-arm queue Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 01/23] hw/arm/virt: add linux, stdout-path to /chosen DT node Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 02/23] cpu-exec.c: Allow disabling of IRQs on ARM Cortex-M CPUs Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 03/23] pl061: implement input interrupt logic Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 04/23] target-arm: Fix resetting issues on ARMv7-M CPUs Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 05/23] target-arm: Fix broken indentation in arm_cpu_reest() Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 06/23] hw/arm/virt: Provide flash devices for boot ROMs Peter Maydell
2014-09-12 13:23 ` Peter Maydell [this message]
2014-09-18  4:48   ` [Qemu-devel] [PULL 07/23] exec.c: Relax restrictions on watchpoint length and alignment Max Filippov
2014-09-18  4:58     ` Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 08/23] exec.c: Provide full set of dummy wp remove functions in user-mode Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 09/23] exec.c: Record watchpoint fault address and direction Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 10/23] cpu-exec: Make debug_excp_handler a QOM CPU method Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 11/23] target-arm: Implement setting of watchpoints Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 12/23] target-arm: Move extended_addresses_enabled() to internals.h Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 13/23] target-arm: Implement handling of fired watchpoints Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 14/23] target-arm: Set DBGDSCR.MOE for debug exceptions taken to AArch32 Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 15/23] target-arm: Remove comment about MDSCR_EL1 being dummy implementation Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 16/23] target-arm: Implement minimal DBGVCR, OSDLR_EL1, MDCCSR_EL0 Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 17/23] target-arm: Push legacy wildcard TLB ops back into v6 Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 18/23] target-arm: Make *IS TLB maintenance ops affect all CPUs Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 19/23] hw/arm/virt: fix pl011 and pl031 irq flags Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 20/23] hw/arm/boot: load DTB as a ROM image Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 21/23] hw/arm/boot: pass an address limit to and return size from load_dtb() Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 22/23] hw/arm/boot: load device tree to base of DRAM if no -kernel option was passed Peter Maydell
2014-09-12 13:23 ` [Qemu-devel] [PULL 23/23] hw/arm/boot: enable DTB support when booting ELF images Peter Maydell
2014-09-12 15:55 ` [Qemu-devel] [PULL 00/23] target-arm queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1410528234-13545-8-git-send-email-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).