[Qemu-devel] [RFC 09/10] ahci: factor out FIS decomposition

[John Snow <jsnow@redhat.com>]

Signed-off-by: John Snow <jsnow@redhat.com>
---
 hw/ide/ahci.c | 169 ++++++++++++++++++++++++++++++----------------------------
 1 file changed, 86 insertions(+), 83 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index e4eae0c..5bc5a92 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -936,10 +936,94 @@ static void process_ncq_command(AHCIState *s, int port, uint8_t *cmd_fis,
     }
 }
 
+static void handle_reg_h2d_fis(AHCIState *s, int port,
+                               int slot, uint8_t *cmd_fis)
+{
+    IDEState *ide_state = &s->dev[port].port.ifs[0];
+    AHCICmdHdr *cmd = s->dev[port].cur_cmd;
+    uint32_t opts = le32_to_cpu(cmd->opts);
+
+    if (cmd_fis[1] & 0x0F) {
+        DPRINTF(port, "Port Multiplier not supported."
+                " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
+                cmd_fis[0], cmd_fis[1], cmd_fis[2]);
+        return;
+    }
+
+    if (cmd_fis[1] & 0x70) {
+        DPRINTF(port, "Reserved flags set in H2D Register FIS."
+                " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
+                cmd_fis[0], cmd_fis[1], cmd_fis[2]);
+        return;
+    }
+
+    if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) {
+        switch (s->dev[port].port_state) {
+        case STATE_RUN:
+            if (cmd_fis[15] & ATA_SRST) {
+                s->dev[port].port_state = STATE_RESET;
+            }
+            break;
+        case STATE_RESET:
+            if (!(cmd_fis[15] & ATA_SRST)) {
+                ahci_reset_port(s, port);
+            }
+            break;
+        }
+        return;
+    }
+
+    /* Check for NCQ command */
+    if (is_ncq(cmd_fis[2])) {
+        process_ncq_command(s, port, cmd_fis, slot);
+        return;
+    }
+
+    /* Decompose the FIS:
+     * AHCI does not interpret FIS packets, it only forwards them.
+     * SATA 1.0 describes how to decode LBA28 and CHS FIS packets.
+     * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets.
+     *
+     * ATA4 describes sector number for LBA28/CHS commands.
+     * ATA6 describes sector number for LBA48 commands.
+     * ATA8 deprecates CHS fully, describing only LBA28/48.
+     *
+     * We dutifully convert the FIS into IDE registers, and allow the
+     * core layer to interpret them as needed. */
+    ide_state->feature = cmd_fis[3];
+    ide_state->sector = cmd_fis[4];      /* LBA 7:0 */
+    ide_state->lcyl = cmd_fis[5];        /* LBA 15:8  */
+    ide_state->hcyl = cmd_fis[6];        /* LBA 23:16 */
+    ide_state->select = cmd_fis[7];      /* LBA 27:24 (LBA28) */
+    ide_state->hob_sector = cmd_fis[8];  /* LBA 31:24 */
+    ide_state->hob_lcyl = cmd_fis[9];    /* LBA 39:32 */
+    ide_state->hob_hcyl = cmd_fis[10];   /* LBA 47:40 */
+    ide_state->hob_feature = cmd_fis[11];
+    ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
+    /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */
+    /* 15: Only valid when UPDATE_COMMAND not set. */
+
+    /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command
+     * table to ide_state->io_buffer */
+    if (opts & AHCI_CMD_ATAPI) {
+        memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
+        debug_print_fis(ide_state->io_buffer, 0x10);
+        s->dev[port].done_atapi_packet = false;
+        /* XXX send PIO setup FIS */
+    }
+
+    ide_state->error = 0;
+
+    /* Reset transferred byte counter */
+    cmd->status = 0;
+
+    /* We're ready to process the command in FIS byte 2. */
+    ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
+}
+
 static int handle_cmd(AHCIState *s, int port, int slot)
 {
     IDEState *ide_state;
-    uint32_t opts;
     uint64_t tbl_addr;
     AHCICmdHdr *cmd;
     uint8_t *cmd_fis;
@@ -966,7 +1050,6 @@ static int handle_cmd(AHCIState *s, int port, int slot)
         return -1;
     }
 
-    opts = le32_to_cpu(cmd->opts);
     tbl_addr = le64_to_cpu(cmd->tbl_addr);
     cmd_len = 0x80;
     cmd_fis = dma_memory_map(s->as, tbl_addr, &cmd_len,
@@ -984,95 +1067,15 @@ static int handle_cmd(AHCIState *s, int port, int slot)
 
     switch (cmd_fis[0]) {
         case SATA_FIS_TYPE_REGISTER_H2D:
+            handle_reg_h2d_fis(s, port, slot, cmd_fis);
             break;
         default:
             DPRINTF(port, "unknown command cmd_fis[0]=%02x cmd_fis[1]=%02x "
                           "cmd_fis[2]=%02x\n", cmd_fis[0], cmd_fis[1],
                           cmd_fis[2]);
-            goto out;
             break;
     }
 
-    if (cmd_fis[1] & 0x0F) {
-        DPRINTF(port, "Port Multiplier not supported."
-                " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
-                cmd_fis[0], cmd_fis[1], cmd_fis[2]);
-        goto out;
-    }
-
-    if (cmd_fis[1] & 0x70) {
-        DPRINTF(port, "Reserved flags set in H2D Register FIS."
-                " cmd_fis[0]=%02x cmd_fis[1]=%02x cmd_fis[2]=%02x\n",
-                cmd_fis[0], cmd_fis[1], cmd_fis[2]);
-        goto out;
-    }
-
-    if (!(cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER)) {
-        switch (s->dev[port].port_state) {
-        case STATE_RUN:
-            if (cmd_fis[15] & ATA_SRST) {
-                s->dev[port].port_state = STATE_RESET;
-            }
-            break;
-        case STATE_RESET:
-            if (!(cmd_fis[15] & ATA_SRST)) {
-                ahci_reset_port(s, port);
-            }
-            break;
-        }
-    }
-
-    else if (cmd_fis[1] & SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER) {
-
-        /* Check for NCQ command */
-        if (is_ncq(cmd_fis[2])) {
-            process_ncq_command(s, port, cmd_fis, slot);
-            goto out;
-        }
-
-        /* Decompose the FIS:
-         * AHCI does not interpret FIS packets, it only forwards them.
-         * SATA 1.0 describes how to decode LBA28 and CHS FIS packets.
-         * Later specifications, e.g, SATA 3.2, describe LBA48 FIS packets.
-         *
-         * ATA4 describes sector number for LBA28/CHS commands.
-         * ATA6 describes sector number for LBA48 commands.
-         * ATA8 deprecates CHS fully, describing only LBA28/48.
-         *
-         * We dutifully convert the FIS into IDE registers, and allow the
-         * core layer to interpret them as needed. */
-        ide_state->feature = cmd_fis[3];
-        ide_state->sector = cmd_fis[4];     /* LBA 7:0 */
-        ide_state->lcyl = cmd_fis[5];       /* LBA 15:8  */
-        ide_state->hcyl = cmd_fis[6];       /* LBA 23:16 */
-        ide_state->select = cmd_fis[7];     /* LBA 27:24 (LBA28) */
-        ide_state->hob_sector = cmd_fis[8]; /* LBA 31:24 */
-        ide_state->hob_lcyl = cmd_fis[9];   /* LBA 39:32 */
-        ide_state->hob_hcyl = cmd_fis[10];  /* LBA 47:40 */
-        ide_state->hob_feature = cmd_fis[11];
-        ide_state->nsector = (int64_t)((cmd_fis[13] << 8) | cmd_fis[12]);
-        /* 14, 16, 17, 18, 19: Reserved (SATA 1.0) */
-        /* 15: Only valid when UPDATE_COMMAND not set. */
-
-        /* Copy the ACMD field (ATAPI packet, if any) from the AHCI command
-         * table to ide_state->io_buffer
-         */
-        if (opts & AHCI_CMD_ATAPI) {
-            memcpy(ide_state->io_buffer, &cmd_fis[AHCI_COMMAND_TABLE_ACMD], 0x10);
-            debug_print_fis(ide_state->io_buffer, 0x10);
-            s->dev[port].done_atapi_packet = false;
-            /* XXX send PIO setup FIS */
-        }
-
-        ide_state->error = 0;
-
-        /* Reset transferred byte counter */
-        cmd->status = 0;
-
-        /* We're ready to process the command in FIS byte 2. */
-        ide_exec_cmd(&s->dev[port].port, cmd_fis[2]);
-    }
-
 out:
     dma_memory_unmap(s->as, cmd_fis, cmd_len, DMA_DIRECTION_FROM_DEVICE,
                      cmd_len);
-- 
1.9.3