qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Hajnoczi <stefanha@redhat.com>
To: qemu-devel@nongnu.org
Cc: Peter Maydell <peter.maydell@linaro.org>,
	John Snow <jsnow@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PULL v2 49/59] ahci: properly shadow the TFD register
Date: Mon, 22 Sep 2014 12:42:20 +0100	[thread overview]
Message-ID: <1411386150-24003-50-git-send-email-stefanha@redhat.com> (raw)
In-Reply-To: <1411386150-24003-1-git-send-email-stefanha@redhat.com>

From: John Snow <jsnow@redhat.com>

In a real AHCI device, several S/ATA registers are mirrored or shadowed
within the AHCI register set. These registers are not updated
synchronously for each read access, but are instead updated after a
Device-to-Host Register FIS packet is received. The D2H FIS contains
the values from these registers on the device.

In QEMU, by reaching directly into the device to grab these bits before
they are "sent," we may introduce race conditions where unexpected
values are present "before they are sent" which could cause issues for
some guests, particularly if an attempt is made to read the PxTFD
register prior to enabling the port, where incorrect values will be read.

This patch also addresses the boot-time values for the PxTFD and PxSIG
registers to bring them in line with the AHCI 1.3 specification.

Lastly, several fields (PxTFD, PxSIG and PxSACT) are read-only,
and any attempts to write to them should be ignored.

Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1408643079-30675-6-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 hw/ide/ahci.c | 42 ++++++++++++++++++++++++++++--------------
 1 file changed, 28 insertions(+), 14 deletions(-)

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 9e1a265..8978643 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -78,8 +78,7 @@ static uint32_t  ahci_port_read(AHCIState *s, int port, int offset)
         val = pr->cmd;
         break;
     case PORT_TFDATA:
-        val = ((uint16_t)s->dev[port].port.ifs[0].error << 8) |
-              s->dev[port].port.ifs[0].status;
+        val = pr->tfdata;
         break;
     case PORT_SIG:
         val = pr->sig;
@@ -251,14 +250,13 @@ static void  ahci_port_write(AHCIState *s, int port, int offset, uint32_t val)
             check_cmd(s, port);
             break;
         case PORT_TFDATA:
-            s->dev[port].port.ifs[0].error = (val >> 8) & 0xff;
-            s->dev[port].port.ifs[0].status = val & 0xff;
+            /* Read Only. */
             break;
         case PORT_SIG:
-            pr->sig = val;
+            /* Read Only */
             break;
         case PORT_SCR_STAT:
-            pr->scr_stat = val;
+            /* Read Only */
             break;
         case PORT_SCR_CTL:
             if (((pr->scr_ctl & AHCI_SCR_SCTL_DET) == 1) &&
@@ -497,6 +495,8 @@ static void ahci_reset_port(AHCIState *s, int port)
     pr->scr_stat = 0;
     pr->scr_err = 0;
     pr->scr_act = 0;
+    pr->tfdata = 0x7F;
+    pr->sig = 0xFFFFFFFF;
     d->busy_slot = -1;
     d->init_d2h_sent = false;
 
@@ -528,16 +528,16 @@ static void ahci_reset_port(AHCIState *s, int port)
 
     s->dev[port].port_state = STATE_RUN;
     if (!ide_state->bs) {
-        s->dev[port].port_regs.sig = 0;
+        pr->sig = 0;
         ide_state->status = SEEK_STAT | WRERR_STAT;
     } else if (ide_state->drive_kind == IDE_CD) {
-        s->dev[port].port_regs.sig = SATA_SIGNATURE_CDROM;
+        pr->sig = SATA_SIGNATURE_CDROM;
         ide_state->lcyl = 0x14;
         ide_state->hcyl = 0xeb;
         DPRINTF(port, "set lcyl = %d\n", ide_state->lcyl);
         ide_state->status = SEEK_STAT | WRERR_STAT | READY_STAT;
     } else {
-        s->dev[port].port_regs.sig = SATA_SIGNATURE_DISK;
+        pr->sig = SATA_SIGNATURE_DISK;
         ide_state->status = SEEK_STAT | WRERR_STAT;
     }
 
@@ -563,7 +563,8 @@ static void debug_print_fis(uint8_t *fis, int cmd_len)
 
 static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
 {
-    AHCIPortRegs *pr = &s->dev[port].port_regs;
+    AHCIDevice *ad = &s->dev[port];
+    AHCIPortRegs *pr = &ad->port_regs;
     IDEState *ide_state;
     uint8_t *sdb_fis;
 
@@ -572,8 +573,8 @@ static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
         return;
     }
 
-    sdb_fis = &s->dev[port].res_fis[RES_FIS_SDBFIS];
-    ide_state = &s->dev[port].port.ifs[0];
+    sdb_fis = &ad->res_fis[RES_FIS_SDBFIS];
+    ide_state = &ad->port.ifs[0];
 
     /* clear memory */
     *(uint32_t*)sdb_fis = 0;
@@ -582,9 +583,14 @@ static void ahci_write_fis_sdb(AHCIState *s, int port, uint32_t finished)
     sdb_fis[0] = ide_state->error;
     sdb_fis[2] = ide_state->status & 0x77;
     s->dev[port].finished |= finished;
-    *(uint32_t*)(sdb_fis + 4) = cpu_to_le32(s->dev[port].finished);
+    *(uint32_t*)(sdb_fis + 4) = cpu_to_le32(ad->finished);
 
-    ahci_trigger_irq(s, &s->dev[port], PORT_IRQ_SDB_FIS);
+    /* Update shadow registers (except BSY 0x80 and DRQ 0x08) */
+    pr->tfdata = (ad->port.ifs[0].error << 8) |
+        (ad->port.ifs[0].status & 0x77) |
+        (pr->tfdata & 0x88);
+
+    ahci_trigger_irq(s, ad, PORT_IRQ_SDB_FIS);
 }
 
 static void ahci_write_fis_pio(AHCIDevice *ad, uint16_t len)
@@ -642,6 +648,10 @@ static void ahci_write_fis_pio(AHCIDevice *ad, uint16_t len)
     pio_fis[18] = 0;
     pio_fis[19] = 0;
 
+    /* Update shadow registers: */
+    pr->tfdata = (ad->port.ifs[0].error << 8) |
+        ad->port.ifs[0].status;
+
     if (pio_fis[2] & ERR_STAT) {
         ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
     }
@@ -693,6 +703,10 @@ static void ahci_write_fis_d2h(AHCIDevice *ad, uint8_t *cmd_fis)
         d2h_fis[i] = 0;
     }
 
+    /* Update shadow registers: */
+    pr->tfdata = (ad->port.ifs[0].error << 8) |
+        ad->port.ifs[0].status;
+
     if (d2h_fis[2] & ERR_STAT) {
         ahci_trigger_irq(ad->hba, ad, PORT_IRQ_TF_ERR);
     }
-- 
1.9.3

  parent reply	other threads:[~2014-09-22 11:44 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-22 11:41 [Qemu-devel] [PULL v2 00/59] Block patches Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 01/59] block/vhdx.c: Mark parent_vhdx_guid variable as unused Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 02/59] ide/atapi: Mark non-data commands as complete Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 03/59] aio-win32: fix uninitialized use of have_select_revents Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 04/59] ide/ahci: Check for -ECANCELED in aio callbacks Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 05/59] block: Add refcnt in BlockDriverAIOCB Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 06/59] block: Add bdrv_aio_cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 07/59] block: Drop bdrv_em_co_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 08/59] block: Drop bdrv_em_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 09/59] thread-pool: Convert thread_pool_aiocb_info.cancel to cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 10/59] linux-aio: Convert laio_aiocb_info.cancel to .cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 11/59] dma: Convert dma_aiocb_info.cancel " Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 12/59] iscsi: Convert iscsi_aiocb_info.cancel " Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 13/59] archipelago: Drop archipelago_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 14/59] blkdebug: Drop blkdebug_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 15/59] blkverify: Drop blkverify_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 16/59] curl: Drop curl_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 17/59] qed: Drop qed_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 18/59] quorum: fix quorum_aio_cancel() Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 19/59] quorum: Convert quorum_aiocb_info.cancel to .cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 20/59] rbd: Drop rbd_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 21/59] sheepdog: Convert sd_aiocb_info.cancel to .cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 22/59] win32-aio: Drop win32_aiocb_info.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 23/59] ide: Convert trim_aiocb_info.cancel to .cancel_async Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 24/59] block: Drop AIOCBInfo.cancel Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 25/59] block: Rename qemu_aio_release -> qemu_aio_unref Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 26/59] qdev-monitor: fix segmentation fault on qdev_device_help() Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 27/59] aio-win32: avoid out-of-bounds access to the events array Stefan Hajnoczi
2014-09-22 11:41 ` [Qemu-devel] [PULL v2 28/59] block: Introduce "null" drivers Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 29/59] qapi: Sort BlockdevDriver enum data list Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 30/59] qapi: Sort items in BlockdevOptions definition Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 31/59] qapi/block: Add "fatal" to BLOCK_IMAGE_CORRUPTED Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 32/59] qcow2: Add qcow2_signal_corruption() Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 33/59] qcow2: Use qcow2_signal_corruption() for overlaps Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 34/59] qcow2: Check L1/L2/reftable entries for alignment Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 35/59] iotests: Add more tests for qcow2 corruption Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 36/59] image-fuzzer: Trivial readability and formatting improvements Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 37/59] hmp: fix memory leak at hmp_info_block_jobs() Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 38/59] qcow2: Fix leak of QemuOpts in qcow2_open() Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 39/59] qapi: Allow enums in anonymous unions Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 40/59] qcow2: Add overlap-check.template option Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 41/59] qapi/block-core: Add "new" qcow2 options Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 42/59] docs: List all image elements currently supported by the fuzzer Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 43/59] fuzz: Add fuzzing functions for entries of refcount table and blocks Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 44/59] layout: Add generators for " Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 45/59] ahci: Adding basic functionality qtest Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 46/59] ahci: MSI capability should be at 0x80, not 0x50 Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 47/59] ahci: Add test_pci_spec to ahci-test Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 48/59] ahci: add test_pci_enable " Stefan Hajnoczi
2014-09-22 11:42 ` Stefan Hajnoczi [this message]
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 50/59] ahci: Add test_hba_spec " Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 51/59] ahci: Add test_hba_enable " Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 52/59] ahci: Add test_identify case " Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 53/59] block/archipelago: Fix typo in qemu_archipelago_truncate() Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 54/59] block: delete cow block driver Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 55/59] block: vhdx - fix reading beyond pointer during image creation Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 56/59] async: aio_context_new(): Handle event_notifier_init failure Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 57/59] virtio: Import virtio_vring.h Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 58/59] vring: Better error handling if num is too large Stefan Hajnoczi
2014-09-22 11:42 ` [Qemu-devel] [PULL v2 59/59] block: Always compile virtio-blk dataplane Stefan Hajnoczi
2014-09-23 12:23 ` [Qemu-devel] [PULL v2 00/59] Block patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411386150-24003-50-git-send-email-stefanha@redhat.com \
    --to=stefanha@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).