[Qemu-devel] [PATCH v4 00/14] virtio-scsi: Dataplane on single iothread

[Qemu-devel] [PATCH v4 00/14] virtio-scsi: Dataplane on single iothread

[Fam Zheng]

This series is only a rebase (onto scsi-next^14) and resend, because one
updated patch was overlooked in v3 by me, as a result Paolo's scsi-next branch
is broken:

qemu-system-x86_64: /home/fam/qemu/hw/scsi/virtio-scsi.c:74:
virtio_scsi_complete_req: Assertion `req->vq == ((void *)0)' failed.

Because of the bad placement of vring field in VirtIOSCSIReq.

What were included in v3 are identical, the only difference from scsi-next is
in "[03/14] virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq":

> fam@fam-t430:~/qemu [virtio-scsi-dataplane]$ git diff paolo/scsi-next 
> diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
> index 2c4e515..6134c0b 100644
> --- a/include/hw/virtio/virtio-scsi.h
> +++ b/include/hw/virtio/virtio-scsi.h
> @@ -200,17 +200,10 @@ typedef struct VirtIOSCSI {
>  
>  typedef struct VirtIOSCSIReq {
>      VirtIOSCSI *dev;
> -
> +    VirtQueue *vq;
>      QEMUSGList qsgl;
>      QEMUIOVector resp_iov;
>  
> -    /* set respectively by non-dataplane and dataplane code */
> -    VirtQueue *vq;
> -    VirtIOSCSIVring *vring;
> -
> -    /* Used for two-stage request submission */
> -    QTAILQ_ENTRY(VirtIOSCSIReq) next;
> -
>      /* Note:
>       * - fields before elem are initialized by virtio_scsi_init_req;
>       * - elem is uninitialized at the time of allocation.
> @@ -218,6 +211,11 @@ typedef struct VirtIOSCSIReq {
>       * */
>  
>      VirtQueueElement elem;
> +    /* Set by dataplane code. */
> +    VirtIOSCSIVring *vring;
> +    /* Used by two stages request submitting */
> +    QTAILQ_ENTRY(VirtIOSCSIReq) next;
> +
>      SCSIRequest *sreq;
>      size_t resp_size;
>      enum SCSIXferMode mode;

Sorry for the trouble, Paolo!

Thanks,
Fam


Fam Zheng (14):
  virtio-scsi: Split virtio_scsi_handle_cmd_req from
    virtio_scsi_handle_cmd
  virtio-scsi: Split virtio_scsi_handle_ctrl_req from
    virtio_scsi_handle_ctrl
  virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq
  virtio-scsi: Make virtio_scsi_init_req public
  virtio-scsi: Make virtio_scsi_free_req public
  virtio-scsi: Make virtio_scsi_push_event public
  virtio-scsi: Add 'iothread' property to virtio-scsi-pci
  virtio-scsi-dataplane: Code to run virtio-scsi on iothread
  virtio-scsi: Hook up with dataplane
  virtio-scsi: Add migration state notifier for dataplane code
  virtio-scsi: Two stages processing of cmd request
  virtio-scsi: Batched prepare for cmd reqs
  virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling
  virtio-scsi: Process ".iothread" property

 hw/scsi/Makefile.objs           |   2 +-
 hw/scsi/virtio-scsi-dataplane.c | 229 +++++++++++++++++++++++++++++++
 hw/scsi/virtio-scsi.c           | 292 +++++++++++++++++++++++++---------------
 hw/virtio/virtio-pci.c          |   2 +
 include/hw/virtio/virtio-scsi.h |  82 ++++++++++-
 5 files changed, 497 insertions(+), 110 deletions(-)
 create mode 100644 hw/scsi/virtio-scsi-dataplane.c

-- 
1.9.3

[Qemu-devel] [PATCH v4 01/14] virtio-scsi: Split virtio_scsi_handle_cmd_req from virtio_scsi_handle_cmd

[Fam Zheng]

This is the "common part" to handle one cmd request. Refactor out for
later usage of dataplane iothread code.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 117 +++++++++++++++-------------------------
 include/hw/virtio/virtio-scsi.h |  36 +++++++++++++
 2 files changed, 79 insertions(+), 74 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 6953cbe..57b2b7b 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -21,41 +21,6 @@
 #include <hw/virtio/virtio-bus.h>
 #include "hw/virtio/virtio-access.h"
 
-typedef struct VirtIOSCSIReq {
-    VirtIOSCSI *dev;
-    VirtQueue *vq;
-    QEMUSGList qsgl;
-    QEMUIOVector resp_iov;
-
-    /* Note:
-     * - fields before elem are initialized by virtio_scsi_init_req;
-     * - elem is uninitialized at the time of allocation.
-     * - fields after elem are zeroed by virtio_scsi_init_req.
-     * */
-
-    VirtQueueElement elem;
-    SCSIRequest *sreq;
-    size_t resp_size;
-    enum SCSIXferMode mode;
-    union {
-        VirtIOSCSICmdResp     cmd;
-        VirtIOSCSICtrlTMFResp tmf;
-        VirtIOSCSICtrlANResp  an;
-        VirtIOSCSIEvent       event;
-    } resp;
-    union {
-        struct {
-            VirtIOSCSICmdReq  cmd;
-            uint8_t           cdb[];
-        } QEMU_PACKED;
-        VirtIOSCSICtrlTMFReq  tmf;
-        VirtIOSCSICtrlANReq   an;
-    } req;
-} VirtIOSCSIReq;
-
-QEMU_BUILD_BUG_ON(offsetof(VirtIOSCSIReq, req.cdb) !=
-                  offsetof(VirtIOSCSIReq, req.cmd) + sizeof(VirtIOSCSICmdReq));
-
 static inline int virtio_scsi_get_lun(uint8_t *lun)
 {
     return ((lun[2] << 8) | lun[3]) & 0x3FFF;
@@ -462,52 +427,56 @@ static void virtio_scsi_fail_cmd_req(VirtIOSCSIReq *req)
     virtio_scsi_complete_cmd_req(req);
 }
 
+void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
+{
+    VirtIOSCSICommon *vs = &s->parent_obj;
+    int n;
+    SCSIDevice *d;
+    int rc;
+
+    rc = virtio_scsi_parse_req(req, sizeof(VirtIOSCSICmdReq) + vs->cdb_size,
+                               sizeof(VirtIOSCSICmdResp) + vs->sense_size);
+    if (rc < 0) {
+        if (rc == -ENOTSUP) {
+            virtio_scsi_fail_cmd_req(req);
+        } else {
+            virtio_scsi_bad_req();
+        }
+        return;
+    }
+
+    d = virtio_scsi_device_find(s, req->req.cmd.lun);
+    if (!d) {
+        req->resp.cmd.response = VIRTIO_SCSI_S_BAD_TARGET;
+        virtio_scsi_complete_cmd_req(req);
+        return;
+    }
+    req->sreq = scsi_req_new(d, req->req.cmd.tag,
+                             virtio_scsi_get_lun(req->req.cmd.lun),
+                             req->req.cdb, req);
+
+    if (req->sreq->cmd.mode != SCSI_XFER_NONE
+        && (req->sreq->cmd.mode != req->mode ||
+            req->sreq->cmd.xfer > req->qsgl.size)) {
+        req->resp.cmd.response = VIRTIO_SCSI_S_OVERRUN;
+        virtio_scsi_complete_cmd_req(req);
+        return;
+    }
+
+    n = scsi_req_enqueue(req->sreq);
+    if (n) {
+        scsi_req_continue(req->sreq);
+    }
+}
+
 static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
 {
     /* use non-QOM casts in the data path */
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
-    VirtIOSCSICommon *vs = &s->parent_obj;
-
     VirtIOSCSIReq *req;
-    int n;
 
     while ((req = virtio_scsi_pop_req(s, vq))) {
-        SCSIDevice *d;
-        int rc;
-
-        rc = virtio_scsi_parse_req(req, sizeof(VirtIOSCSICmdReq) + vs->cdb_size,
-                                   sizeof(VirtIOSCSICmdResp) + vs->sense_size);
-        if (rc < 0) {
-            if (rc == -ENOTSUP) {
-                virtio_scsi_fail_cmd_req(req);
-            } else {
-                virtio_scsi_bad_req();
-            }
-            continue;
-        }
-
-        d = virtio_scsi_device_find(s, req->req.cmd.lun);
-        if (!d) {
-            req->resp.cmd.response = VIRTIO_SCSI_S_BAD_TARGET;
-            virtio_scsi_complete_cmd_req(req);
-            continue;
-        }
-        req->sreq = scsi_req_new(d, req->req.cmd.tag,
-                                 virtio_scsi_get_lun(req->req.cmd.lun),
-                                 req->req.cdb, req);
-
-        if (req->sreq->cmd.mode != SCSI_XFER_NONE
-            && (req->sreq->cmd.mode != req->mode ||
-                req->sreq->cmd.xfer > req->qsgl.size)) {
-            req->resp.cmd.response = VIRTIO_SCSI_S_OVERRUN;
-            virtio_scsi_complete_cmd_req(req);
-            continue;
-        }
-
-        n = scsi_req_enqueue(req->sreq);
-        if (n) {
-            scsi_req_continue(req->sreq);
-        }
+        virtio_scsi_handle_cmd_req(s, req);
     }
 }
 
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 188a2d9..7b65f5e 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -172,6 +172,41 @@ typedef struct {
     bool events_dropped;
 } VirtIOSCSI;
 
+typedef struct VirtIOSCSIReq {
+    VirtIOSCSI *dev;
+    VirtQueue *vq;
+    QEMUSGList qsgl;
+    QEMUIOVector resp_iov;
+
+    /* Note:
+     * - fields before elem are initialized by virtio_scsi_init_req;
+     * - elem is uninitialized at the time of allocation.
+     * - fields after elem are zeroed by virtio_scsi_init_req.
+     * */
+
+    VirtQueueElement elem;
+    SCSIRequest *sreq;
+    size_t resp_size;
+    enum SCSIXferMode mode;
+    union {
+        VirtIOSCSICmdResp     cmd;
+        VirtIOSCSICtrlTMFResp tmf;
+        VirtIOSCSICtrlANResp  an;
+        VirtIOSCSIEvent       event;
+    } resp;
+    union {
+        struct {
+            VirtIOSCSICmdReq  cmd;
+            uint8_t           cdb[];
+        } QEMU_PACKED;
+        VirtIOSCSICtrlTMFReq  tmf;
+        VirtIOSCSICtrlANReq   an;
+    } req;
+} VirtIOSCSIReq;
+
+QEMU_BUILD_BUG_ON(offsetof(VirtIOSCSIReq, req.cdb) !=
+                  offsetof(VirtIOSCSIReq, req.cmd) + sizeof(VirtIOSCSICmdReq));
+
 #define DEFINE_VIRTIO_SCSI_PROPERTIES(_state, _conf_field)                     \
     DEFINE_PROP_UINT32("num_queues", _state, _conf_field.num_queues, 1),       \
     DEFINE_PROP_UINT32("max_sectors", _state, _conf_field.max_sectors, 0xFFFF),\
@@ -192,5 +227,6 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
                                 HandleOutput cmd);
 
 void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
+void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 02/14] virtio-scsi: Split virtio_scsi_handle_ctrl_req from virtio_scsi_handle_ctrl

[Fam Zheng]

To share with dataplane code.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 60 ++++++++++++++++++++++-------------------
 include/hw/virtio/virtio-scsi.h |  1 +
 2 files changed, 34 insertions(+), 27 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 57b2b7b..5f3c0c1 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -308,40 +308,46 @@ fail:
     req->resp.tmf.response = VIRTIO_SCSI_S_BAD_TARGET;
 }
 
-static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
+void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
 {
-    VirtIOSCSI *s = (VirtIOSCSI *)vdev;
-    VirtIOSCSIReq *req;
+    VirtIODevice *vdev = (VirtIODevice *)s;
+    int type;
 
-    while ((req = virtio_scsi_pop_req(s, vq))) {
-        int type;
+    if (iov_to_buf(req->elem.out_sg, req->elem.out_num, 0,
+                &type, sizeof(type)) < sizeof(type)) {
+        virtio_scsi_bad_req();
+        return;
+    }
 
-        if (iov_to_buf(req->elem.out_sg, req->elem.out_num, 0,
-                       &type, sizeof(type)) < sizeof(type)) {
+    virtio_tswap32s(vdev, &req->req.tmf.type);
+    if (req->req.tmf.type == VIRTIO_SCSI_T_TMF) {
+        if (virtio_scsi_parse_req(req, sizeof(VirtIOSCSICtrlTMFReq),
+                    sizeof(VirtIOSCSICtrlTMFResp)) < 0) {
             virtio_scsi_bad_req();
-            continue;
+        } else {
+            virtio_scsi_do_tmf(s, req);
         }
 
-        virtio_tswap32s(vdev, &req->req.tmf.type);
-        if (req->req.tmf.type == VIRTIO_SCSI_T_TMF) {
-            if (virtio_scsi_parse_req(req, sizeof(VirtIOSCSICtrlTMFReq),
-                                      sizeof(VirtIOSCSICtrlTMFResp)) < 0) {
-                virtio_scsi_bad_req();
-            } else {
-                virtio_scsi_do_tmf(s, req);
-            }
-
-        } else if (req->req.tmf.type == VIRTIO_SCSI_T_AN_QUERY ||
-                   req->req.tmf.type == VIRTIO_SCSI_T_AN_SUBSCRIBE) {
-            if (virtio_scsi_parse_req(req, sizeof(VirtIOSCSICtrlANReq),
-                                      sizeof(VirtIOSCSICtrlANResp)) < 0) {
-                virtio_scsi_bad_req();
-            } else {
-                req->resp.an.event_actual = 0;
-                req->resp.an.response = VIRTIO_SCSI_S_OK;
-            }
+    } else if (req->req.tmf.type == VIRTIO_SCSI_T_AN_QUERY ||
+            req->req.tmf.type == VIRTIO_SCSI_T_AN_SUBSCRIBE) {
+        if (virtio_scsi_parse_req(req, sizeof(VirtIOSCSICtrlANReq),
+                    sizeof(VirtIOSCSICtrlANResp)) < 0) {
+            virtio_scsi_bad_req();
+        } else {
+            req->resp.an.event_actual = 0;
+            req->resp.an.response = VIRTIO_SCSI_S_OK;
         }
-        virtio_scsi_complete_req(req);
+    }
+    virtio_scsi_complete_req(req);
+}
+
+static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
+{
+    VirtIOSCSI *s = (VirtIOSCSI *)vdev;
+    VirtIOSCSIReq *req;
+
+    while ((req = virtio_scsi_pop_req(s, vq))) {
+        virtio_scsi_handle_ctrl_req(s, req);
     }
 }
 
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 7b65f5e..b91d326 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -227,6 +227,7 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
                                 HandleOutput cmd);
 
 void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
+void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 03/14] virtio-scsi: Add VirtIOSCSIVring in VirtIOSCSIReq

[Fam Zheng]

Move VirtIOSCSIReq to header and add one field "vring" as a wrapper
structure of Vring, VirtIOSCSIVring.

This is necessary for coming dataplane code that runs uses vring on
iothread.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 include/hw/virtio/virtio-scsi.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index b91d326..848a1d3 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -17,6 +17,8 @@
 #include "hw/virtio/virtio.h"
 #include "hw/pci/pci.h"
 #include "hw/scsi/scsi.h"
+#include "sysemu/iothread.h"
+#include "hw/virtio/dataplane/vring.h"
 
 #define TYPE_VIRTIO_SCSI_COMMON "virtio-scsi-common"
 #define VIRTIO_SCSI_COMMON(obj) \
@@ -153,6 +155,15 @@ struct VirtIOSCSIConf {
     char *wwpn;
 };
 
+struct VirtIOSCSICommon;
+
+typedef struct {
+    struct VirtIOSCSICommon *parent;
+    Vring vring;
+    EventNotifier host_notifier;
+    EventNotifier guest_notifier;
+} VirtIOSCSIVring;
+
 typedef struct VirtIOSCSICommon {
     VirtIODevice parent_obj;
     VirtIOSCSIConf conf;
@@ -185,6 +196,8 @@ typedef struct VirtIOSCSIReq {
      * */
 
     VirtQueueElement elem;
+    /* Set by dataplane code. */
+    VirtIOSCSIVring *vring;
     SCSIRequest *sreq;
     size_t resp_size;
     enum SCSIXferMode mode;
-- 
1.9.3

[Qemu-devel] [PATCH v4 04/14] virtio-scsi: Make virtio_scsi_init_req public

[Fam Zheng]

To share with datplane code later.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 2 +-
 include/hw/virtio/virtio-scsi.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 5f3c0c1..8cab75b 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -37,7 +37,7 @@ static inline SCSIDevice *virtio_scsi_device_find(VirtIOSCSI *s, uint8_t *lun)
     return scsi_device_find(&s->bus, 0, lun[1], virtio_scsi_get_lun(lun));
 }
 
-static VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq)
+VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq)
 {
     VirtIOSCSIReq *req;
     VirtIOSCSICommon *vs = (VirtIOSCSICommon *)s;
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 848a1d3..1c71c80 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -242,5 +242,6 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
 void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
 void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
+VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq);
 
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 05/14] virtio-scsi: Make virtio_scsi_free_req public

[Fam Zheng]

To share with dataplane code later.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 2 +-
 include/hw/virtio/virtio-scsi.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 8cab75b..c7ae83d 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -53,7 +53,7 @@ VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq)
     return req;
 }
 
-static void virtio_scsi_free_req(VirtIOSCSIReq *req)
+void virtio_scsi_free_req(VirtIOSCSIReq *req)
 {
     VirtIOSCSICommon *vs = (VirtIOSCSICommon *)req->dev;
 
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 1c71c80..4405004 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -243,5 +243,6 @@ void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
 void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq);
+void virtio_scsi_free_req(VirtIOSCSIReq *req);
 
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 06/14] virtio-scsi: Make virtio_scsi_push_event public

[Fam Zheng]

Later this will be called by dataplane code.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 4 ++--
 include/hw/virtio/virtio-scsi.h | 2 ++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index c7ae83d..58b4200 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -561,8 +561,8 @@ static int virtio_scsi_load(QEMUFile *f, void *opaque, int version_id)
     return 0;
 }
 
-static void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
-                                   uint32_t event, uint32_t reason)
+void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
+                            uint32_t event, uint32_t reason)
 {
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s);
     VirtIOSCSIReq *req;
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 4405004..8ecce52 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -244,5 +244,7 @@ void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
 VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq);
 void virtio_scsi_free_req(VirtIOSCSIReq *req);
+void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
+                            uint32_t event, uint32_t reason);
 
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 07/14] virtio-scsi: Add 'iothread' property to virtio-scsi-pci

[Fam Zheng]

Similar to this property in virtio-blk for dataplane, add it as a QOM
link in virtio-scsi and an alias in virtio-scsi-pci, in order to assign
an iothread to the device.

Other bus types can be added later.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 11 +++++++++++
 hw/virtio/virtio-pci.c          |  2 ++
 include/hw/virtio/virtio-scsi.h |  1 +
 3 files changed, 14 insertions(+)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 58b4200..91ead26 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -728,6 +728,16 @@ static void virtio_scsi_device_realize(DeviceState *dev, Error **errp)
                     virtio_scsi_save, virtio_scsi_load, s);
 }
 
+static void virtio_scsi_instance_init(Object *obj)
+{
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(obj);
+
+    object_property_add_link(obj, "iothread", TYPE_IOTHREAD,
+                             (Object **)&vs->conf.iothread,
+                             qdev_prop_allow_set_link_before_realize,
+                             OBJ_PROP_LINK_UNREF_ON_RELEASE, &error_abort);
+}
+
 void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp)
 {
     VirtIODevice *vdev = VIRTIO_DEVICE(dev);
@@ -786,6 +796,7 @@ static const TypeInfo virtio_scsi_info = {
     .name = TYPE_VIRTIO_SCSI,
     .parent = TYPE_VIRTIO_SCSI_COMMON,
     .instance_size = sizeof(VirtIOSCSI),
+    .instance_init = virtio_scsi_instance_init,
     .class_init = virtio_scsi_class_init,
 };
 
diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
index f560814..6da82b9 100644
--- a/hw/virtio/virtio-pci.c
+++ b/hw/virtio/virtio-pci.c
@@ -1187,6 +1187,8 @@ static void virtio_scsi_pci_instance_init(Object *obj)
     VirtIOSCSIPCI *dev = VIRTIO_SCSI_PCI(obj);
     object_initialize(&dev->vdev, sizeof(dev->vdev), TYPE_VIRTIO_SCSI);
     object_property_add_child(obj, "virtio-backend", OBJECT(&dev->vdev), NULL);
+    object_property_add_alias(obj, "iothread", OBJECT(&dev->vdev), "iothread",
+                              &error_abort);
 }
 
 static const TypeInfo virtio_scsi_pci_info = {
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 8ecce52..1ed93ab 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -153,6 +153,7 @@ struct VirtIOSCSIConf {
     uint32_t cmd_per_lun;
     char *vhostfd;
     char *wwpn;
+    IOThread *iothread;
 };
 
 struct VirtIOSCSICommon;
-- 
1.9.3

[Qemu-devel] [PATCH v4 08/14] virtio-scsi-dataplane: Code to run virtio-scsi on iothread

[Fam Zheng]

This implements the core part of dataplane feature of virtio-scsi.

A few fields are added in VirtIOSCSICommon to maintain the dataplane
status. These fields are managed by a new source file:
virtio-scsi-dataplane.c.

Most code in this file will run on an iothread, unless otherwise
commented as in a global mutex context, such as those functions to
start, stop and setting the iothread property.

Upon start, we set up guest/host event notifiers, in a same way as
virtio-blk does. The handlers then pop request from vring and call into
virtio-scsi.c functions to process it. So we need to make sure make all
those called functions work with iothread, too.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/Makefile.objs           |   2 +-
 hw/scsi/virtio-scsi-dataplane.c | 222 ++++++++++++++++++++++++++++++++++++++++
 include/hw/virtio/virtio-scsi.h |  25 ++++-
 3 files changed, 245 insertions(+), 4 deletions(-)
 create mode 100644 hw/scsi/virtio-scsi-dataplane.c

diff --git a/hw/scsi/Makefile.objs b/hw/scsi/Makefile.objs
index 121ddc5..40c79d3 100644
--- a/hw/scsi/Makefile.objs
+++ b/hw/scsi/Makefile.objs
@@ -8,6 +8,6 @@ common-obj-$(CONFIG_ESP_PCI) += esp-pci.o
 obj-$(CONFIG_PSERIES) += spapr_vscsi.o
 
 ifeq ($(CONFIG_VIRTIO),y)
-obj-y += virtio-scsi.o
+obj-y += virtio-scsi.o virtio-scsi-dataplane.o
 obj-$(CONFIG_VHOST_SCSI) += vhost-scsi.o
 endif
diff --git a/hw/scsi/virtio-scsi-dataplane.c b/hw/scsi/virtio-scsi-dataplane.c
new file mode 100644
index 0000000..acbf622
--- /dev/null
+++ b/hw/scsi/virtio-scsi-dataplane.c
@@ -0,0 +1,222 @@
+/*
+ * Virtio SCSI dataplane
+ *
+ * Copyright Red Hat, Inc. 2014
+ *
+ * Authors:
+ *   Fam Zheng <famz@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "hw/virtio/virtio-scsi.h"
+#include "qemu/error-report.h"
+#include <hw/scsi/scsi.h>
+#include <block/scsi.h>
+#include <hw/virtio/virtio-bus.h>
+#include "hw/virtio/virtio-access.h"
+#include "stdio.h"
+
+/* Context: QEMU global mutex held */
+void virtio_scsi_set_iothread(VirtIOSCSI *s, IOThread *iothread)
+{
+    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
+    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s);
+
+    assert(!s->ctx);
+    s->ctx = iothread_get_aio_context(vs->conf.iothread);
+
+    /* Don't try if transport does not support notifiers. */
+    if (!k->set_guest_notifiers || !k->set_host_notifier) {
+        fprintf(stderr, "virtio-scsi: Failed to set iothread "
+                   "(transport does not support notifiers)");
+        exit(1);
+    }
+}
+
+static VirtIOSCSIVring *virtio_scsi_vring_init(VirtIOSCSI *s,
+                                               VirtQueue *vq,
+                                               EventNotifierHandler *handler,
+                                               int n)
+{
+    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
+    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+    VirtIOSCSIVring *r = g_slice_new(VirtIOSCSIVring);
+
+    /* Set up virtqueue notify */
+    if (k->set_host_notifier(qbus->parent, n, true) != 0) {
+        fprintf(stderr, "virtio-scsi: Failed to set host notifier\n");
+        exit(1);
+    }
+    r->host_notifier = *virtio_queue_get_host_notifier(vq);
+    r->guest_notifier = *virtio_queue_get_guest_notifier(vq);
+    aio_set_event_notifier(s->ctx, &r->host_notifier, handler);
+
+    r->parent = s;
+
+    if (!vring_setup(&r->vring, VIRTIO_DEVICE(s), n)) {
+        fprintf(stderr, "virtio-scsi: VRing setup failed\n");
+        exit(1);
+    }
+    return r;
+}
+
+VirtIOSCSIReq *virtio_scsi_pop_req_vring(VirtIOSCSI *s,
+                                         VirtIOSCSIVring *vring)
+{
+    VirtIOSCSIReq *req = virtio_scsi_init_req(s, NULL);
+    int r;
+
+    req->vring = vring;
+    r = vring_pop((VirtIODevice *)s, &vring->vring, &req->elem);
+    if (r < 0) {
+        virtio_scsi_free_req(req);
+        req = NULL;
+    }
+    return req;
+}
+
+void virtio_scsi_vring_push_notify(VirtIOSCSIReq *req)
+{
+    vring_push(&req->vring->vring, &req->elem,
+               req->qsgl.size + req->resp_iov.size);
+    event_notifier_set(&req->vring->guest_notifier);
+}
+
+static void virtio_scsi_iothread_handle_ctrl(EventNotifier *notifier)
+{
+    VirtIOSCSIVring *vring = container_of(notifier,
+                                          VirtIOSCSIVring, host_notifier);
+    VirtIOSCSI *s = VIRTIO_SCSI(vring->parent);
+    VirtIOSCSIReq *req;
+
+    event_notifier_test_and_clear(notifier);
+    while ((req = virtio_scsi_pop_req_vring(s, vring))) {
+        virtio_scsi_handle_ctrl_req(s, req);
+    }
+}
+
+static void virtio_scsi_iothread_handle_event(EventNotifier *notifier)
+{
+    VirtIOSCSIVring *vring = container_of(notifier,
+                                          VirtIOSCSIVring, host_notifier);
+    VirtIOSCSI *s = vring->parent;
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+
+    event_notifier_test_and_clear(notifier);
+
+    if (!(vdev->status & VIRTIO_CONFIG_S_DRIVER_OK)) {
+        return;
+    }
+
+    if (s->events_dropped) {
+        virtio_scsi_push_event(s, NULL, VIRTIO_SCSI_T_NO_EVENT, 0);
+    }
+}
+
+static void virtio_scsi_iothread_handle_cmd(EventNotifier *notifier)
+{
+    VirtIOSCSIVring *vring = container_of(notifier,
+                                          VirtIOSCSIVring, host_notifier);
+    VirtIOSCSI *s = (VirtIOSCSI *)vring->parent;
+    VirtIOSCSIReq *req;
+
+    event_notifier_test_and_clear(notifier);
+    while ((req = virtio_scsi_pop_req_vring(s, vring))) {
+        virtio_scsi_handle_cmd_req(s, req);
+    }
+}
+
+/* Context: QEMU global mutex held */
+void virtio_scsi_dataplane_start(VirtIOSCSI *s)
+{
+    int i;
+    int rc;
+    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
+    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s);
+
+    if (s->dataplane_started ||
+        s->dataplane_starting ||
+        s->ctx != iothread_get_aio_context(vs->conf.iothread)) {
+        return;
+    }
+
+    s->dataplane_starting = true;
+
+    /* Set up guest notifier (irq) */
+    rc = k->set_guest_notifiers(qbus->parent, vs->conf.num_queues + 2, true);
+    if (rc != 0) {
+        fprintf(stderr, "virtio-scsi: Failed to set guest notifiers, "
+                "ensure -enable-kvm is set\n");
+        exit(1);
+    }
+
+    aio_context_acquire(s->ctx);
+    s->ctrl_vring = virtio_scsi_vring_init(s, vs->ctrl_vq,
+                                           virtio_scsi_iothread_handle_ctrl,
+                                           0);
+    s->event_vring = virtio_scsi_vring_init(s, vs->event_vq,
+                                            virtio_scsi_iothread_handle_event,
+                                            1);
+    s->cmd_vrings = g_malloc0(sizeof(VirtIOSCSIVring) * vs->conf.num_queues);
+    for (i = 0; i < vs->conf.num_queues; i++) {
+        s->cmd_vrings[i] =
+            virtio_scsi_vring_init(s, vs->cmd_vqs[i],
+                                   virtio_scsi_iothread_handle_cmd,
+                                   i + 2);
+    }
+
+    aio_context_release(s->ctx);
+    s->dataplane_starting = false;
+    s->dataplane_started = true;
+}
+
+/* Context: QEMU global mutex held */
+void virtio_scsi_dataplane_stop(VirtIOSCSI *s)
+{
+    BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s)));
+    VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
+    VirtIODevice *vdev = VIRTIO_DEVICE(s);
+    VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s);
+    int i;
+
+    if (!s->dataplane_started || s->dataplane_stopping) {
+        return;
+    }
+    s->dataplane_stopping = true;
+    assert(s->ctx == iothread_get_aio_context(vs->conf.iothread));
+
+    aio_context_acquire(s->ctx);
+
+    aio_set_event_notifier(s->ctx, &s->ctrl_vring->host_notifier, NULL);
+    aio_set_event_notifier(s->ctx, &s->event_vring->host_notifier, NULL);
+    for (i = 0; i < vs->conf.num_queues; i++) {
+        aio_set_event_notifier(s->ctx, &s->cmd_vrings[i]->host_notifier, NULL);
+    }
+
+    bdrv_drain_all(); /* ensure there are no in-flight requests */
+
+    aio_context_release(s->ctx);
+
+    /* Sync vring state back to virtqueue so that non-dataplane request
+     * processing can continue when we disable the host notifier below.
+     */
+    vring_teardown(&s->ctrl_vring->vring, vdev, 0);
+    vring_teardown(&s->event_vring->vring, vdev, 1);
+    for (i = 0; i < vs->conf.num_queues; i++) {
+        vring_teardown(&s->cmd_vrings[i]->vring, vdev, 2 + i);
+    }
+
+    for (i = 0; i < vs->conf.num_queues + 2; i++) {
+        k->set_host_notifier(qbus->parent, i, false);
+    }
+
+    /* Clean up guest notifier (irq) */
+    k->set_guest_notifiers(qbus->parent, vs->conf.num_queues + 2, false);
+    s->dataplane_stopping = false;
+    s->dataplane_started = false;
+}
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 1ed93ab..8e1968f 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -156,10 +156,10 @@ struct VirtIOSCSIConf {
     IOThread *iothread;
 };
 
-struct VirtIOSCSICommon;
+struct VirtIOSCSI;
 
 typedef struct {
-    struct VirtIOSCSICommon *parent;
+    struct VirtIOSCSI *parent;
     Vring vring;
     EventNotifier host_notifier;
     EventNotifier guest_notifier;
@@ -176,12 +176,24 @@ typedef struct VirtIOSCSICommon {
     VirtQueue **cmd_vqs;
 } VirtIOSCSICommon;
 
-typedef struct {
+typedef struct VirtIOSCSI {
     VirtIOSCSICommon parent_obj;
 
     SCSIBus bus;
     int resetting;
     bool events_dropped;
+
+    /* Fields for dataplane below */
+    AioContext *ctx; /* one iothread per virtio-scsi-pci for now */
+
+    /* Vring is used instead of vq in dataplane code, because of the underlying
+     * memory layer thread safety */
+    VirtIOSCSIVring *ctrl_vring;
+    VirtIOSCSIVring *event_vring;
+    VirtIOSCSIVring **cmd_vrings;
+    bool dataplane_started;
+    bool dataplane_starting;
+    bool dataplane_stopping;
 } VirtIOSCSI;
 
 typedef struct VirtIOSCSIReq {
@@ -248,4 +260,11 @@ void virtio_scsi_free_req(VirtIOSCSIReq *req);
 void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
                             uint32_t event, uint32_t reason);
 
+void virtio_scsi_set_iothread(VirtIOSCSI *s, IOThread *iothread);
+void virtio_scsi_dataplane_start(VirtIOSCSI *s);
+void virtio_scsi_dataplane_stop(VirtIOSCSI *s);
+void virtio_scsi_vring_push_notify(VirtIOSCSIReq *req);
+VirtIOSCSIReq *virtio_scsi_pop_req_vring(VirtIOSCSI *s,
+                                         VirtIOSCSIVring *vring);
+
 #endif /* _QEMU_VIRTIO_SCSI_H */
-- 
1.9.3

[Qemu-devel] [PATCH v4 09/14] virtio-scsi: Hook up with dataplane

[Fam Zheng]

This enables the virtio-scsi-dataplane code by setting the iothread
in virtio-scsi device, and makes any function that is called by
back from dataplane to cooperate with the caller: they need to be
vring/iothread aware when handling the requests and using scsi devices
on the bus.

Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 hw/scsi/virtio-scsi.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 48 insertions(+), 4 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 91ead26..dc705f0 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -69,13 +69,19 @@ static void virtio_scsi_complete_req(VirtIOSCSIReq *req)
     VirtIODevice *vdev = VIRTIO_DEVICE(s);
 
     qemu_iovec_from_buf(&req->resp_iov, 0, &req->resp, req->resp_size);
-    virtqueue_push(vq, &req->elem, req->qsgl.size + req->resp_iov.size);
+    if (req->vring) {
+        assert(req->vq == NULL);
+        virtio_scsi_vring_push_notify(req);
+    } else {
+        virtqueue_push(vq, &req->elem, req->qsgl.size + req->resp_iov.size);
+        virtio_notify(vdev, vq);
+    }
+
     if (req->sreq) {
         req->sreq->hba_private = NULL;
         scsi_req_unref(req->sreq);
     }
     virtio_scsi_free_req(req);
-    virtio_notify(vdev, vq);
 }
 
 static void virtio_scsi_bad_req(void)
@@ -208,6 +214,11 @@ static void virtio_scsi_do_tmf(VirtIOSCSI *s, VirtIOSCSIReq *req)
     BusChild *kid;
     int target;
 
+    if (s->dataplane_started && bdrv_get_aio_context(d->conf.bs) != s->ctx) {
+        aio_context_acquire(s->ctx);
+        bdrv_set_aio_context(d->conf.bs, s->ctx);
+        aio_context_release(s->ctx);
+    }
     /* Here VIRTIO_SCSI_S_OK means "FUNCTION COMPLETE".  */
     req->resp.tmf.response = VIRTIO_SCSI_S_OK;
 
@@ -346,6 +357,10 @@ static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
     VirtIOSCSIReq *req;
 
+    if (s->ctx) {
+        virtio_scsi_dataplane_start(s);
+        return;
+    }
     while ((req = virtio_scsi_pop_req(s, vq))) {
         virtio_scsi_handle_ctrl_req(s, req);
     }
@@ -457,6 +472,11 @@ void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
         virtio_scsi_complete_cmd_req(req);
         return;
     }
+    if (s->dataplane_started && bdrv_get_aio_context(d->conf.bs) != s->ctx) {
+        aio_context_acquire(s->ctx);
+        bdrv_set_aio_context(d->conf.bs, s->ctx);
+        aio_context_release(s->ctx);
+    }
     req->sreq = scsi_req_new(d, req->req.cmd.tag,
                              virtio_scsi_get_lun(req->req.cmd.lun),
                              req->req.cdb, req);
@@ -481,6 +501,10 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
     VirtIOSCSIReq *req;
 
+    if (s->ctx) {
+        virtio_scsi_dataplane_start(s);
+        return;
+    }
     while ((req = virtio_scsi_pop_req(s, vq))) {
         virtio_scsi_handle_cmd_req(s, req);
     }
@@ -531,6 +555,9 @@ static void virtio_scsi_reset(VirtIODevice *vdev)
     VirtIOSCSI *s = VIRTIO_SCSI(vdev);
     VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(vdev);
 
+    if (s->ctx) {
+        virtio_scsi_dataplane_stop(s);
+    }
     s->resetting++;
     qbus_reset_all(&s->bus.qbus);
     s->resetting--;
@@ -573,10 +600,19 @@ void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
         return;
     }
 
-    req = virtio_scsi_pop_req(s, vs->event_vq);
+    if (s->dataplane_started) {
+        assert(s->ctx);
+        aio_context_acquire(s->ctx);
+    }
+
+    if (s->dataplane_started) {
+        req = virtio_scsi_pop_req_vring(s, s->event_vring);
+    } else {
+        req = virtio_scsi_pop_req(s, vs->event_vq);
+    }
     if (!req) {
         s->events_dropped = true;
-        return;
+        goto out;
     }
 
     if (s->events_dropped) {
@@ -605,12 +641,20 @@ void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
         evt->lun[3] = dev->lun & 0xFF;
     }
     virtio_scsi_complete_req(req);
+out:
+    if (s->dataplane_started) {
+        aio_context_release(s->ctx);
+    }
 }
 
 static void virtio_scsi_handle_event(VirtIODevice *vdev, VirtQueue *vq)
 {
     VirtIOSCSI *s = VIRTIO_SCSI(vdev);
 
+    if (s->ctx) {
+        virtio_scsi_dataplane_start(s);
+        return;
+    }
     if (s->events_dropped) {
         virtio_scsi_push_event(s, NULL, VIRTIO_SCSI_T_NO_EVENT, 0);
     }
-- 
1.9.3

[Qemu-devel] [PATCH v4 10/14] virtio-scsi: Add migration state notifier for dataplane code

[Fam Zheng]

Similar to virtio-blk-dataplane, we stop the iothread while migration
starts and restart it when migration finishes.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 hw/scsi/virtio-scsi.c           | 35 ++++++++++++++++++++++++++++++++---
 include/hw/virtio/virtio-scsi.h |  2 ++
 2 files changed, 34 insertions(+), 3 deletions(-)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index dc705f0..57efe65 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -20,6 +20,7 @@
 #include <block/scsi.h>
 #include <hw/virtio/virtio-bus.h>
 #include "hw/virtio/virtio-access.h"
+#include "migration/migration.h"
 
 static inline int virtio_scsi_get_lun(uint8_t *lun)
 {
@@ -357,7 +358,7 @@ static void virtio_scsi_handle_ctrl(VirtIODevice *vdev, VirtQueue *vq)
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
     VirtIOSCSIReq *req;
 
-    if (s->ctx) {
+    if (s->ctx && !s->dataplane_disabled) {
         virtio_scsi_dataplane_start(s);
         return;
     }
@@ -501,7 +502,7 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
     VirtIOSCSIReq *req;
 
-    if (s->ctx) {
+    if (s->ctx && !s->dataplane_disabled) {
         virtio_scsi_dataplane_start(s);
         return;
     }
@@ -651,7 +652,7 @@ static void virtio_scsi_handle_event(VirtIODevice *vdev, VirtQueue *vq)
 {
     VirtIOSCSI *s = VIRTIO_SCSI(vdev);
 
-    if (s->ctx) {
+    if (s->ctx && !s->dataplane_disabled) {
         virtio_scsi_dataplane_start(s);
         return;
     }
@@ -742,6 +743,31 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
     }
 }
 
+/* Disable dataplane thread during live migration since it does not
+ * update the dirty memory bitmap yet.
+ */
+static void virtio_scsi_migration_state_changed(Notifier *notifier, void *data)
+{
+    VirtIOSCSI *s = container_of(notifier, VirtIOSCSI,
+                                 migration_state_notifier);
+    MigrationState *mig = data;
+
+    if (migration_in_setup(mig)) {
+        if (!s->dataplane_started) {
+            return;
+        }
+        virtio_scsi_dataplane_stop(s);
+        s->dataplane_disabled = true;
+    } else if (migration_has_finished(mig) ||
+               migration_has_failed(mig)) {
+        if (s->dataplane_started) {
+            return;
+        }
+        bdrv_drain_all(); /* complete in-flight non-dataplane requests */
+        s->dataplane_disabled = false;
+    }
+}
+
 static void virtio_scsi_device_realize(DeviceState *dev, Error **errp)
 {
     VirtIODevice *vdev = VIRTIO_DEVICE(dev);
@@ -770,6 +796,8 @@ static void virtio_scsi_device_realize(DeviceState *dev, Error **errp)
 
     register_savevm(dev, "virtio-scsi", virtio_scsi_id++, 1,
                     virtio_scsi_save, virtio_scsi_load, s);
+    s->migration_state_notifier.notify = virtio_scsi_migration_state_changed;
+    add_migration_state_change_notifier(&s->migration_state_notifier);
 }
 
 static void virtio_scsi_instance_init(Object *obj)
@@ -796,6 +824,7 @@ static void virtio_scsi_device_unrealize(DeviceState *dev, Error **errp)
     VirtIOSCSI *s = VIRTIO_SCSI(dev);
 
     unregister_savevm(dev, "virtio-scsi", s);
+    remove_migration_state_change_notifier(&s->migration_state_notifier);
 
     virtio_scsi_common_unrealize(dev, errp);
 }
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 8e1968f..1a6a919 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -194,6 +194,8 @@ typedef struct VirtIOSCSI {
     bool dataplane_started;
     bool dataplane_starting;
     bool dataplane_stopping;
+    bool dataplane_disabled;
+    Notifier migration_state_notifier;
 } VirtIOSCSI;
 
 typedef struct VirtIOSCSIReq {
-- 
1.9.3

[Qemu-devel] [PATCH v4 11/14] virtio-scsi: Two stages processing of cmd request

[Fam Zheng]

Mechanical change, in preparation for bdrv_io_plug/bdrv_io_unplug.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 hw/scsi/virtio-scsi-dataplane.c |  4 +++-
 hw/scsi/virtio-scsi.c           | 20 ++++++++++++--------
 include/hw/virtio/virtio-scsi.h |  3 ++-
 3 files changed, 17 insertions(+), 10 deletions(-)

diff --git a/hw/scsi/virtio-scsi-dataplane.c b/hw/scsi/virtio-scsi-dataplane.c
index acbf622..11f5705 100644
--- a/hw/scsi/virtio-scsi-dataplane.c
+++ b/hw/scsi/virtio-scsi-dataplane.c
@@ -126,7 +126,9 @@ static void virtio_scsi_iothread_handle_cmd(EventNotifier *notifier)
 
     event_notifier_test_and_clear(notifier);
     while ((req = virtio_scsi_pop_req_vring(s, vring))) {
-        virtio_scsi_handle_cmd_req(s, req);
+        if (virtio_scsi_handle_cmd_req_prepare(s, req)) {
+            virtio_scsi_handle_cmd_req_submit(s, req);
+        }
     }
 }
 
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 57efe65..6cf070f 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -449,10 +449,9 @@ static void virtio_scsi_fail_cmd_req(VirtIOSCSIReq *req)
     virtio_scsi_complete_cmd_req(req);
 }
 
-void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
+bool virtio_scsi_handle_cmd_req_prepare(VirtIOSCSI *s, VirtIOSCSIReq *req)
 {
     VirtIOSCSICommon *vs = &s->parent_obj;
-    int n;
     SCSIDevice *d;
     int rc;
 
@@ -464,14 +463,14 @@ void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
         } else {
             virtio_scsi_bad_req();
         }
-        return;
+        return false;
     }
 
     d = virtio_scsi_device_find(s, req->req.cmd.lun);
     if (!d) {
         req->resp.cmd.response = VIRTIO_SCSI_S_BAD_TARGET;
         virtio_scsi_complete_cmd_req(req);
-        return;
+        return false;
     }
     if (s->dataplane_started && bdrv_get_aio_context(d->conf.bs) != s->ctx) {
         aio_context_acquire(s->ctx);
@@ -487,11 +486,14 @@ void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req)
             req->sreq->cmd.xfer > req->qsgl.size)) {
         req->resp.cmd.response = VIRTIO_SCSI_S_OVERRUN;
         virtio_scsi_complete_cmd_req(req);
-        return;
+        return false;
     }
+    return true;
+}
 
-    n = scsi_req_enqueue(req->sreq);
-    if (n) {
+void virtio_scsi_handle_cmd_req_submit(VirtIOSCSI *s, VirtIOSCSIReq *req)
+{
+    if (scsi_req_enqueue(req->sreq)) {
         scsi_req_continue(req->sreq);
     }
 }
@@ -507,7 +509,9 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
         return;
     }
     while ((req = virtio_scsi_pop_req(s, vq))) {
-        virtio_scsi_handle_cmd_req(s, req);
+        if (virtio_scsi_handle_cmd_req_prepare(s, req)) {
+            virtio_scsi_handle_cmd_req_submit(s, req);
+        }
     }
 }
 
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 1a6a919..1cc759a 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -256,7 +256,8 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
 
 void virtio_scsi_common_unrealize(DeviceState *dev, Error **errp);
 void virtio_scsi_handle_ctrl_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
-void virtio_scsi_handle_cmd_req(VirtIOSCSI *s, VirtIOSCSIReq *req);
+bool virtio_scsi_handle_cmd_req_prepare(VirtIOSCSI *s, VirtIOSCSIReq *req);
+void virtio_scsi_handle_cmd_req_submit(VirtIOSCSI *s, VirtIOSCSIReq *req);
 VirtIOSCSIReq *virtio_scsi_init_req(VirtIOSCSI *s, VirtQueue *vq);
 void virtio_scsi_free_req(VirtIOSCSIReq *req);
 void virtio_scsi_push_event(VirtIOSCSI *s, SCSIDevice *dev,
-- 
1.9.3

[Qemu-devel] [PATCH v4 12/14] virtio-scsi: Batched prepare for cmd reqs

[Fam Zheng]

Queue the popped requests while calling
virtio_scsi_handle_cmd_req_prepare(), then submit them after all
prepared.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 hw/scsi/virtio-scsi-dataplane.c | 9 +++++++--
 hw/scsi/virtio-scsi.c           | 9 +++++++--
 include/hw/virtio/virtio-scsi.h | 3 +++
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/hw/scsi/virtio-scsi-dataplane.c b/hw/scsi/virtio-scsi-dataplane.c
index 11f5705..b778e05 100644
--- a/hw/scsi/virtio-scsi-dataplane.c
+++ b/hw/scsi/virtio-scsi-dataplane.c
@@ -122,14 +122,19 @@ static void virtio_scsi_iothread_handle_cmd(EventNotifier *notifier)
     VirtIOSCSIVring *vring = container_of(notifier,
                                           VirtIOSCSIVring, host_notifier);
     VirtIOSCSI *s = (VirtIOSCSI *)vring->parent;
-    VirtIOSCSIReq *req;
+    VirtIOSCSIReq *req, *next;
+    QTAILQ_HEAD(, VirtIOSCSIReq) reqs = QTAILQ_HEAD_INITIALIZER(reqs);
 
     event_notifier_test_and_clear(notifier);
     while ((req = virtio_scsi_pop_req_vring(s, vring))) {
         if (virtio_scsi_handle_cmd_req_prepare(s, req)) {
-            virtio_scsi_handle_cmd_req_submit(s, req);
+            QTAILQ_INSERT_TAIL(&reqs, req, next);
         }
     }
+
+    QTAILQ_FOREACH_SAFE(req, &reqs, next, next) {
+        virtio_scsi_handle_cmd_req_submit(s, req);
+    }
 }
 
 /* Context: QEMU global mutex held */
diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 6cf070f..395178e 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -502,7 +502,8 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
 {
     /* use non-QOM casts in the data path */
     VirtIOSCSI *s = (VirtIOSCSI *)vdev;
-    VirtIOSCSIReq *req;
+    VirtIOSCSIReq *req, *next;
+    QTAILQ_HEAD(, VirtIOSCSIReq) reqs = QTAILQ_HEAD_INITIALIZER(reqs);
 
     if (s->ctx && !s->dataplane_disabled) {
         virtio_scsi_dataplane_start(s);
@@ -510,9 +511,13 @@ static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
     }
     while ((req = virtio_scsi_pop_req(s, vq))) {
         if (virtio_scsi_handle_cmd_req_prepare(s, req)) {
-            virtio_scsi_handle_cmd_req_submit(s, req);
+            QTAILQ_INSERT_TAIL(&reqs, req, next);
         }
     }
+
+    QTAILQ_FOREACH_SAFE(req, &reqs, next, next) {
+        virtio_scsi_handle_cmd_req_submit(s, req);
+    }
 }
 
 static void virtio_scsi_get_config(VirtIODevice *vdev,
diff --git a/include/hw/virtio/virtio-scsi.h b/include/hw/virtio/virtio-scsi.h
index 1cc759a..6134c0b 100644
--- a/include/hw/virtio/virtio-scsi.h
+++ b/include/hw/virtio/virtio-scsi.h
@@ -213,6 +213,9 @@ typedef struct VirtIOSCSIReq {
     VirtQueueElement elem;
     /* Set by dataplane code. */
     VirtIOSCSIVring *vring;
+    /* Used by two stages request submitting */
+    QTAILQ_ENTRY(VirtIOSCSIReq) next;
+
     SCSIRequest *sreq;
     size_t resp_size;
     enum SCSIXferMode mode;
-- 
1.9.3

[Qemu-devel] [PATCH v4 13/14] virtio-scsi: Call bdrv_io_plug/bdrv_io_unplug in cmd request handling

[Fam Zheng]

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 hw/scsi/virtio-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 395178e..09a39cb 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -488,6 +488,8 @@ bool virtio_scsi_handle_cmd_req_prepare(VirtIOSCSI *s, VirtIOSCSIReq *req)
         virtio_scsi_complete_cmd_req(req);
         return false;
     }
+    scsi_req_ref(req->sreq);
+    bdrv_io_plug(d->conf.bs);
     return true;
 }
 
@@ -496,6 +498,8 @@ void virtio_scsi_handle_cmd_req_submit(VirtIOSCSI *s, VirtIOSCSIReq *req)
     if (scsi_req_enqueue(req->sreq)) {
         scsi_req_continue(req->sreq);
     }
+    bdrv_io_unplug(req->sreq->dev->conf.bs);
+    scsi_req_unref(req->sreq);
 }
 
 static void virtio_scsi_handle_cmd(VirtIODevice *vdev, VirtQueue *vq)
-- 
1.9.3

[Qemu-devel] [PATCH v4 14/14] virtio-scsi: Process ".iothread" property

[Fam Zheng]

We are ready, now let's effectively enable dataplane.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 hw/scsi/virtio-scsi.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/hw/scsi/virtio-scsi.c b/hw/scsi/virtio-scsi.c
index 09a39cb..fa36e23 100644
--- a/hw/scsi/virtio-scsi.c
+++ b/hw/scsi/virtio-scsi.c
@@ -754,6 +754,10 @@ void virtio_scsi_common_realize(DeviceState *dev, Error **errp,
         s->cmd_vqs[i] = virtio_add_queue(vdev, VIRTIO_SCSI_VQ_SIZE,
                                          cmd);
     }
+
+    if (s->conf.iothread) {
+        virtio_scsi_set_iothread(VIRTIO_SCSI(s), s->conf.iothread);
+    }
 }
 
 /* Disable dataplane thread during live migration since it does not
-- 
1.9.3