From: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org
Cc: rob.herring@linaro.org, peter.crosthwaite@xilinx.com,
aggelerf@ethz.ch, serge.fdrv@gmail.com, agraf@suse.de,
greg.bellows@linaro.org, pbonzini@redhat.com,
alex.bennee@linaro.org, christoffer.dall@linaro.org,
rth@twiddle.net
Subject: [Qemu-devel] [PATCH v7 01/11] target-arm: Add HCR_EL2
Date: Fri, 26 Sep 2014 18:08:24 +1000 [thread overview]
Message-ID: <1411718914-6608-2-git-send-email-edgar.iglesias@gmail.com> (raw)
In-Reply-To: <1411718914-6608-1-git-send-email-edgar.iglesias@gmail.com>
From: "Edgar E. Iglesias" <edgar.iglesias@xilinx.com>
Reviewed-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---
target-arm/cpu.h | 36 ++++++++++++++++++++++++++++++++++++
target-arm/helper.c | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 70 insertions(+)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index d1e1ccb..36507f9 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -184,6 +184,7 @@ typedef struct CPUARMState {
MPU write buffer control. */
uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
+ uint64_t hcr_el2; /* Hypervisor configuration register */
uint32_t ifsr_el2; /* Fault status registers. */
uint64_t esr_el[4];
uint32_t c6_region[8]; /* MPU base/size registers. */
@@ -565,6 +566,41 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
}
}
+#define HCR_VM (1ULL << 0)
+#define HCR_SWIO (1ULL << 1)
+#define HCR_PTW (1ULL << 2)
+#define HCR_FMO (1ULL << 3)
+#define HCR_IMO (1ULL << 4)
+#define HCR_AMO (1ULL << 5)
+#define HCR_VF (1ULL << 6)
+#define HCR_VI (1ULL << 7)
+#define HCR_VSE (1ULL << 8)
+#define HCR_FB (1ULL << 9)
+#define HCR_BSU_MASK (3ULL << 10)
+#define HCR_DC (1ULL << 12)
+#define HCR_TWI (1ULL << 13)
+#define HCR_TWE (1ULL << 14)
+#define HCR_TID0 (1ULL << 15)
+#define HCR_TID1 (1ULL << 16)
+#define HCR_TID2 (1ULL << 17)
+#define HCR_TID3 (1ULL << 18)
+#define HCR_TSC (1ULL << 19)
+#define HCR_TIDCP (1ULL << 20)
+#define HCR_TACR (1ULL << 21)
+#define HCR_TSW (1ULL << 22)
+#define HCR_TPC (1ULL << 23)
+#define HCR_TPU (1ULL << 24)
+#define HCR_TTLB (1ULL << 25)
+#define HCR_TVM (1ULL << 26)
+#define HCR_TGE (1ULL << 27)
+#define HCR_TDZ (1ULL << 28)
+#define HCR_HCD (1ULL << 29)
+#define HCR_TRVM (1ULL << 30)
+#define HCR_RW (1ULL << 31)
+#define HCR_CD (1ULL << 32)
+#define HCR_ID (1ULL << 33)
+#define HCR_MASK ((1ULL << 34) - 1)
+
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
void vfp_set_fpscr(CPUARMState *env, uint32_t val);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index ece9673..40b0c5f 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -2230,10 +2230,44 @@ static const ARMCPRegInfo v8_el3_no_el2_cp_reginfo[] = {
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0,
.access = PL2_RW,
.readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
+ { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
+ .type = ARM_CP_NO_MIGRATE,
+ .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
+ .access = PL2_RW,
+ .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore },
REGINFO_SENTINEL
};
+static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ uint64_t valid_mask = HCR_MASK;
+
+ if (arm_feature(env, ARM_FEATURE_EL3)) {
+ valid_mask &= ~HCR_HCD;
+ } else {
+ valid_mask &= ~HCR_TSC;
+ }
+
+ /* Clear RES0 bits. */
+ value &= valid_mask;
+
+ /* These bits change the MMU setup:
+ * HCR_VM enables stage 2 translation
+ * HCR_PTW forbids certain page-table setups
+ * HCR_DC Disables stage1 and enables stage2 translation
+ */
+ if ((raw_read(env, ri) ^ value) & (HCR_VM | HCR_PTW | HCR_DC)) {
+ tlb_flush(CPU(cpu), 1);
+ }
+ raw_write(env, ri, value);
+}
+
static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
+ { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0,
+ .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2),
+ .writefn = hcr_write },
{ .name = "ELR_EL2", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1,
--
1.9.1
next prev parent reply other threads:[~2014-09-26 8:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 8:08 [Qemu-devel] [PATCH v7 00/11] target-arm: Parts of the AArch64 EL2/3 exception model Edgar E. Iglesias
2014-09-26 8:08 ` Edgar E. Iglesias [this message]
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 02/11] target-arm: Add SCR_EL3 Edgar E. Iglesias
2014-09-26 14:46 ` Peter Maydell
2014-09-26 19:45 ` Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 03/11] target-arm: A64: Refactor aarch64_cpu_do_interrupt Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 04/11] target-arm: Break out exception masking to a separate func Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 05/11] target-arm: Don't take interrupts targeting lower ELs Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 06/11] target-arm: A64: Correct updates to FAR and ESR on exceptions Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 07/11] target-arm: A64: Emulate the HVC insn Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 08/11] target-arm: Add a Hypervisor Trap exception type Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 09/11] target-arm: A64: Emulate the SMC insn Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 10/11] target-arm: Add IRQ and FIQ routing to EL2 and 3 Edgar E. Iglesias
2014-09-26 8:08 ` [Qemu-devel] [PATCH v7 11/11] target-arm: Add support for VIRQ and VFIQ Edgar E. Iglesias
2014-09-26 15:23 ` [Qemu-devel] [PATCH v7 00/11] target-arm: Parts of the AArch64 EL2/3 exception model Peter Maydell
2014-09-29 10:31 ` Jan Kiszka
2014-09-29 10:41 ` Peter Maydell
2014-09-29 10:48 ` Jan Kiszka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411718914-6608-2-git-send-email-edgar.iglesias@gmail.com \
--to=edgar.iglesias@gmail.com \
--cc=aggelerf@ethz.ch \
--cc=agraf@suse.de \
--cc=alex.bennee@linaro.org \
--cc=christoffer.dall@linaro.org \
--cc=greg.bellows@linaro.org \
--cc=pbonzini@redhat.com \
--cc=peter.crosthwaite@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rob.herring@linaro.org \
--cc=rth@twiddle.net \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).