qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Richard Henderson <rth@twiddle.net>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL v2 1/9] tcg-sparc: Support addsub2_i64
Date: Mon, 29 Sep 2014 12:01:50 -0700	[thread overview]
Message-ID: <1412017318-4331-2-git-send-email-rth@twiddle.net> (raw)
In-Reply-To: <1412017318-4331-1-git-send-email-rth@twiddle.net>

Signed-off-by: Richard Henderson <rth@twiddle.net>
---
 tcg/sparc/tcg-target.c | 72 +++++++++++++++++++++++++++++++++++++++++++++-----
 tcg/sparc/tcg-target.h |  4 +--
 2 files changed, 67 insertions(+), 9 deletions(-)

diff --git a/tcg/sparc/tcg-target.c b/tcg/sparc/tcg-target.c
index 40f2ec1..21981d8 100644
--- a/tcg/sparc/tcg-target.c
+++ b/tcg/sparc/tcg-target.c
@@ -719,9 +719,9 @@ static void tcg_out_setcond_i64(TCGContext *s, TCGCond cond, TCGReg ret,
     }
 }
 
-static void tcg_out_addsub2(TCGContext *s, TCGReg rl, TCGReg rh,
-                            TCGReg al, TCGReg ah, int32_t bl, int blconst,
-                            int32_t bh, int bhconst, int opl, int oph)
+static void tcg_out_addsub2_i32(TCGContext *s, TCGReg rl, TCGReg rh,
+                                TCGReg al, TCGReg ah, int32_t bl, int blconst,
+                                int32_t bh, int bhconst, int opl, int oph)
 {
     TCGReg tmp = TCG_REG_T1;
 
@@ -735,6 +735,51 @@ static void tcg_out_addsub2(TCGContext *s, TCGReg rl, TCGReg rh,
     tcg_out_mov(s, TCG_TYPE_I32, rl, tmp);
 }
 
+static void tcg_out_addsub2_i64(TCGContext *s, TCGReg rl, TCGReg rh,
+                                TCGReg al, TCGReg ah, int32_t bl, int blconst,
+                                int32_t bh, int bhconst, bool is_sub)
+{
+    TCGReg tmp = TCG_REG_T1;
+
+    /* Note that the low parts are fully consumed before tmp is set.  */
+    if (rl != ah && (bhconst || rl != bh)) {
+        tmp = rl;
+    }
+
+    tcg_out_arithc(s, tmp, al, bl, blconst, is_sub ? ARITH_SUBCC : ARITH_ADDCC);
+
+    /* Note that ADDX/SUBX take the carry-in from %icc, the 32-bit carry,
+       while we want %xcc, the 64-bit carry.  */
+    /* ??? There is a 2011 VIS3 ADDXC insn that does take a 64-bit carry.  */
+
+    if (bh == TCG_REG_G0) {
+	/* If we have a zero, we can perform the operation in two insns,
+           with the arithmetic first, and a conditional move into place.  */
+	if (rh == ah) {
+            tcg_out_arithi(s, TCG_REG_T2, ah, 1,
+			   is_sub ? ARITH_SUB : ARITH_ADD);
+            tcg_out_movcc(s, TCG_COND_LTU, MOVCC_XCC, rh, TCG_REG_T2, 0);
+	} else {
+            tcg_out_arithi(s, rh, ah, 1, is_sub ? ARITH_SUB : ARITH_ADD);
+	    tcg_out_movcc(s, TCG_COND_GEU, MOVCC_XCC, rh, ah, 0);
+	}
+    } else {
+        /* Otherwise adjust BH as if there is carry into T2 ... */
+        if (bhconst) {
+            tcg_out_movi(s, TCG_TYPE_I64, TCG_REG_T2, bh + (is_sub ? -1 : 1));
+        } else {
+            tcg_out_arithi(s, TCG_REG_T2, bh, 1,
+                           is_sub ? ARITH_SUB : ARITH_ADD);
+        }
+        /* ... smoosh T2 back to original BH if carry is clear ... */
+        tcg_out_movcc(s, TCG_COND_GEU, MOVCC_XCC, TCG_REG_T2, bh, bhconst);
+	/* ... and finally perform the arithmetic with the new operand.  */
+        tcg_out_arith(s, rh, ah, TCG_REG_T2, is_sub ? ARITH_SUB : ARITH_ADD);
+    }
+
+    tcg_out_mov(s, TCG_TYPE_I64, rl, tmp);
+}
+
 static void tcg_out_call_nodelay(TCGContext *s, tcg_insn_unit *dest)
 {
     ptrdiff_t disp = tcg_pcrel_diff(s, dest);
@@ -1264,12 +1309,14 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc,
         break;
 
     case INDEX_op_add2_i32:
-        tcg_out_addsub2(s, a0, a1, a2, args[3], args[4], const_args[4],
-                        args[5], const_args[5], ARITH_ADDCC, ARITH_ADDX);
+        tcg_out_addsub2_i32(s, args[0], args[1], args[2], args[3],
+                            args[4], const_args[4], args[5], const_args[5],
+                            ARITH_ADDCC, ARITH_ADDX);
         break;
     case INDEX_op_sub2_i32:
-        tcg_out_addsub2(s, a0, a1, a2, args[3], args[4], const_args[4],
-                        args[5], const_args[5], ARITH_SUBCC, ARITH_SUBX);
+        tcg_out_addsub2_i32(s, args[0], args[1], args[2], args[3],
+                            args[4], const_args[4], args[5], const_args[5],
+                            ARITH_SUBCC, ARITH_SUBX);
         break;
     case INDEX_op_mulu2_i32:
         c = ARITH_UMUL;
@@ -1351,6 +1398,14 @@ static void tcg_out_op(TCGContext *s, TCGOpcode opc,
     case INDEX_op_movcond_i64:
         tcg_out_movcond_i64(s, args[5], a0, a1, a2, c2, args[3], const_args[3]);
         break;
+    case INDEX_op_add2_i64:
+        tcg_out_addsub2_i64(s, args[0], args[1], args[2], args[3], args[4],
+                            const_args[4], args[5], const_args[5], false);
+        break;
+    case INDEX_op_sub2_i64:
+        tcg_out_addsub2_i64(s, args[0], args[1], args[2], args[3], args[4],
+                            const_args[4], args[5], const_args[5], true);
+        break;
 
     gen_arith:
         tcg_out_arithc(s, a0, a1, a2, c2, c);
@@ -1449,6 +1504,9 @@ static const TCGTargetOpDef sparc_op_defs[] = {
     { INDEX_op_setcond_i64, { "R", "RZ", "RJ" } },
     { INDEX_op_movcond_i64, { "R", "RZ", "RJ", "RI", "0" } },
 
+    { INDEX_op_add2_i64, { "R", "R", "RZ", "RZ", "RJ", "RI" } },
+    { INDEX_op_sub2_i64, { "R", "R", "RZ", "RZ", "RJ", "RI" } },
+
     { INDEX_op_qemu_ld_i32, { "r", "A" } },
     { INDEX_op_qemu_ld_i64, { "R", "A" } },
     { INDEX_op_qemu_st_i32, { "sZ", "A" } },
diff --git a/tcg/sparc/tcg-target.h b/tcg/sparc/tcg-target.h
index 089f976..a44d34f 100644
--- a/tcg/sparc/tcg-target.h
+++ b/tcg/sparc/tcg-target.h
@@ -133,8 +133,8 @@ typedef enum {
 #define TCG_TARGET_HAS_nor_i64          0
 #define TCG_TARGET_HAS_deposit_i64      0
 #define TCG_TARGET_HAS_movcond_i64      1
-#define TCG_TARGET_HAS_add2_i64         0
-#define TCG_TARGET_HAS_sub2_i64         0
+#define TCG_TARGET_HAS_add2_i64         1
+#define TCG_TARGET_HAS_sub2_i64         1
 #define TCG_TARGET_HAS_mulu2_i64        0
 #define TCG_TARGET_HAS_muls2_i64        0
 #define TCG_TARGET_HAS_muluh_i64        0
-- 
1.9.3

  reply	other threads:[~2014-09-29 19:02 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-29 19:01 [Qemu-devel] [PULL v2 0/9] tcg-next queue Richard Henderson
2014-09-29 19:01 ` Richard Henderson [this message]
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 2/9] tcg-sparc: Use ADDXC in addsub2_i64 Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 3/9] tcg-sparc: Fix setcond_i32 uninitialized value Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 4/9] tcg-sparc: Use ADDXC in setcond_i64 Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 5/9] tcg-sparc: Rename ADDX/SUBX insns Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 6/9] tcg-sparc: Use UMULXHI instruction Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 7/9] tcg-aarch64: Use 32-bit loads for qemu_ld_i32 Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 8/9] qemu/compiler: Define QEMU_ARTIFICIAL Richard Henderson
2014-09-29 19:01 ` [Qemu-devel] [PULL v2 9/9] tcg: Always enable TCGv type checking Richard Henderson
2014-09-30 12:09 ` [Qemu-devel] [PULL v2 0/9] tcg-next queue Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412017318-4331-2-git-send-email-rth@twiddle.net \
    --to=rth@twiddle.net \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).