From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: Greg Bellows <greg.bellows@linaro.org>
Subject: [Qemu-devel] [PATCH v5 21/33] target-arm: add TTBR0_EL3 and make TTBR0/1 banked
Date: Tue, 30 Sep 2014 16:49:33 -0500 [thread overview]
Message-ID: <1412113785-21525-22-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1412113785-21525-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Add TTBR0 and maps secure/non-secure instance of ttbr0 and ttbr1
accordingly (translation table base register).
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
target-arm/cpu.h | 21 +++++++++++++++++--
target-arm/helper.c | 58 +++++++++++++++++++++++++++++++++++++++++------------
2 files changed, 64 insertions(+), 15 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 332a2cb..c99158e 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -202,8 +202,25 @@ typedef struct CPUARMState {
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
uint32_t c1_sder; /* Secure debug enable register. */
uint32_t c1_nsacr; /* Non-secure access control register. */
- uint64_t ttbr0_el1; /* MMU translation table base 0. */
- uint64_t ttbr1_el1; /* MMU translation table base 1. */
+ union { /* MMU translation table base 0. */
+ struct {
+ uint64_t ttbr0_ns;
+ uint64_t ttbr0_s;
+ };
+ struct {
+ uint64_t ttbr0_el1;
+ uint64_t ttbr0_el3;
+ };
+ };
+ union { /* MMU translation table base 1. */
+ struct {
+ uint64_t ttbr1_ns;
+ uint64_t ttbr1_s;
+ };
+ struct {
+ uint64_t ttbr1_el1;
+ };
+ };
uint64_t c2_control; /* MMU translation table base control. */
uint32_t c2_mask; /* MMU translation table base selection mask. */
uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 90f5352..2a6a129 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -921,7 +921,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
{ .name = "CCSIDR", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
.access = PL1_R, .readfn = ccsidr_read, .type = ARM_CP_NO_MIGRATE },
- { .name = "CSSELR",
+ { .name = "CSSELR",
.cp = 15, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0,
.access = PL1_RW, .writefn = csselr_write, .resetvalue = 0,
.bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s),
@@ -1658,14 +1658,22 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
.access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
- { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
+ { .name = "TTBR0", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) } },
+ { .name = "TTBR0_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
- { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1) },
+ { .name = "TTBR1", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_el1) } },
+ { .name = "TTBR1_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1) },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1896,11 +1904,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
{ .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
REGINFO_SENTINEL
};
@@ -2407,6 +2417,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.opc0 = 3, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el3) },
+ { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el3) },
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4496,18 +4510,23 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot,
static bool get_level1_table_address(CPUARMState *env, uint32_t *table,
uint32_t address)
{
+ /* We only get here if EL1 is running in Aarch32. If EL3 is running in
+ * Aarch32 there is a secure and non-secure instance of the translation
+ * table registers.
+ */
if (address & env->cp15.c2_mask) {
if ((env->cp15.c2_control & TTBCR_PD1)) {
/* Translation table walk disabled for TTBR1 */
return false;
}
- *table = env->cp15.ttbr1_el1 & 0xffffc000;
+ *table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
} else {
if ((env->cp15.c2_control & TTBCR_PD0)) {
/* Translation table walk disabled for TTBR0 */
return false;
}
- *table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+ *table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) &
+ env->cp15.c2_base_mask;
}
*table |= (address >> 18) & 0x3ffc;
return true;
@@ -4761,6 +4780,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
int32_t granule_sz = 9;
int32_t va_size = 32;
int32_t tbi = 0;
+ uint32_t cur_el = arm_current_el(env);
if (arm_el_is_aa64(env, 1)) {
va_size = 64;
@@ -4812,7 +4832,19 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* we will always flush the TLB any time the ASID is changed).
*/
if (ttbr_select == 0) {
- ttbr = env->cp15.ttbr0_el1;
+ if (arm_el_is_aa64(env, 3)) {
+ switch (cur_el) {
+ case 3:
+ ttbr = env->cp15.ttbr0_el3;
+ break;
+ case 1:
+ case 0:
+ default:
+ ttbr = env->cp15.ttbr0_el1;
+ }
+ } else {
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
+ }
epd = extract32(env->cp15.c2_control, 7, 1);
tsz = t0sz;
@@ -4824,7 +4856,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
granule_sz = 11;
}
} else {
- ttbr = env->cp15.ttbr1_el1;
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
epd = extract32(env->cp15.c2_control, 23, 1);
tsz = t1sz;
--
1.8.3.2
next prev parent reply other threads:[~2014-09-30 21:50 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-30 21:49 [Qemu-devel] [PATCH v5 00/33] target-arm: add Security Extensions for CPUs Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 01/33] target-arm: increase arrays of registers R13 & R14 Greg Bellows
2014-10-06 14:48 ` Peter Maydell
2014-10-06 19:21 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 02/33] target-arm: add arm_is_secure() function Greg Bellows
2014-09-30 22:50 ` Edgar E. Iglesias
2014-10-01 12:53 ` Greg Bellows
2014-10-06 14:56 ` Peter Maydell
2014-10-06 17:57 ` Sergey Fedorov
2014-10-06 18:01 ` Peter Maydell
2014-10-06 19:45 ` Greg Bellows
2014-10-06 20:07 ` Peter Maydell
2014-10-06 20:47 ` Greg Bellows
2014-10-06 21:07 ` Peter Maydell
2014-10-08 19:33 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 03/33] target-arm: reject switching to monitor mode Greg Bellows
2014-10-06 15:02 ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 04/33] target-arm: rename arm_current_pl to arm_current_el Greg Bellows
2014-09-30 22:56 ` Edgar E. Iglesias
2014-10-01 12:54 ` Greg Bellows
2014-10-06 15:10 ` Peter Maydell
2014-10-06 19:55 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 05/33] target-arm: make arm_current_pl() return PL3 Greg Bellows
2014-10-01 1:23 ` Sergey Fedorov
2014-10-01 14:31 ` Greg Bellows
2014-10-06 15:34 ` Peter Maydell
2014-10-06 20:53 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 06/33] target-arm: A32: Emulate the SMC instruction Greg Bellows
2014-10-06 15:46 ` Peter Maydell
2014-10-07 1:56 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 07/33] target-arm: extend async excp masking Greg Bellows
2014-10-06 15:53 ` Peter Maydell
2014-10-07 3:16 ` Greg Bellows
2014-10-07 7:03 ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 08/33] target-arm: add async excp target_el function Greg Bellows
2014-10-06 16:02 ` Peter Maydell
2014-10-07 3:52 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 09/33] target-arm: add macros to access banked registers Greg Bellows
2014-10-06 16:09 ` Peter Maydell
2014-10-07 4:02 ` Greg Bellows
2014-10-07 6:54 ` Peter Maydell
2014-10-07 17:49 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 10/33] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-06 16:13 ` Peter Maydell
2014-10-06 18:10 ` Sergey Fedorov
2014-10-07 4:21 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 11/33] target-arm: arrayfying fieldoffset for banking Greg Bellows
2014-10-06 16:19 ` Peter Maydell
2014-10-07 5:06 ` Greg Bellows
2014-10-07 7:12 ` Peter Maydell
2014-10-07 21:50 ` Greg Bellows
2014-10-07 22:38 ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 12/33] target-arm: insert Aarch32 cpregs twice into hashtable Greg Bellows
2014-10-06 16:25 ` Peter Maydell
2014-10-07 5:31 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 13/33] target-arm: move Aarch32 SCR into security reglist Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 14/33] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 15/33] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 16/33] target-arm: add NSACR register Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 17/33] target-arm: add SDER definition Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 18/33] target-arm: add MVBAR support Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 19/33] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 20/33] target-arm: make CSSELR banked Greg Bellows
2014-09-30 21:49 ` Greg Bellows [this message]
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 22/33] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-09-30 23:18 ` Edgar E. Iglesias
2014-10-01 13:05 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 23/33] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 24/33] target-arm: make DACR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 25/33] target-arm: make IFSR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 26/33] target-arm: make DFSR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 27/33] target-arm: make IFAR/DFAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 28/33] target-arm: make PAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 29/33] target-arm: make VBAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 30/33] target-arm: make MAIR0/1 banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 31/33] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-01 14:30 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 32/33] target-arm: add GDB scr register Greg Bellows
2014-10-06 16:27 ` Peter Maydell
2014-10-07 5:09 ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 33/33] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
2014-10-06 16:28 ` Peter Maydell
2014-10-06 16:32 ` [Qemu-devel] [PATCH v5 00/33] target-arm: add Security Extensions for CPUs Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1412113785-21525-22-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).