qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
	serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: Greg Bellows <greg.bellows@linaro.org>
Subject: [Qemu-devel] [PATCH v5 07/33] target-arm: extend async excp masking
Date: Tue, 30 Sep 2014 16:49:19 -0500	[thread overview]
Message-ID: <1412113785-21525-8-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1412113785-21525-1-git-send-email-greg.bellows@linaro.org>

From: Fabian Aggeler <aggelerf@ethz.ch>

This patch extends arm_excp_unmasked() according to ARM ARMv7 and
ARM ARMv8 (all EL running in Aarch32) and adds comments.

If EL3 is using Aarch64 IRQ/FIQ masking is ignored in
all exception levels other than EL3 if SCR.{FIQ|IRQ} is
set to 1 (routed to EL3).

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>

----------
v4 -> v5
- Merge with v4 patch 10
---
 target-arm/cpu.h | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 106 insertions(+), 10 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index c000716..30f57fd 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -1226,11 +1226,8 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx)
 {
     CPUARMState *env = cs->env_ptr;
     unsigned int cur_el = arm_current_el(env);
-    unsigned int target_el = arm_excp_target_el(cs, excp_idx);
-    /* FIXME: Use actual secure state.  */
-    bool secure = false;
-    /* If in EL1/0, Physical IRQ routing to EL2 only happens from NS state.  */
-    bool irq_can_hyp = !secure && cur_el < 2 && target_el == 2;
+    bool secure = arm_is_secure(env);
+
     /* ARMv7-M interrupt return works by loading a magic value
      * into the PC.  On real hardware the load causes the
      * return to occur.  The qemu implementation performs the
@@ -1245,19 +1242,118 @@ static inline bool arm_excp_unmasked(CPUState *cs, unsigned int excp_idx)
                         && (!IS_M(env) || env->regs[15] < 0xfffffff0);
 
     /* Don't take exceptions if they target a lower EL.  */
-    if (cur_el > target_el) {
+    if (cur_el > arm_excp_target_el(cs, excp_idx)) {
         return false;
     }
 
+    /* ARM ARMv7 B1.8.6  Asynchronous exception masking (table B1-12/B1-13)
+     * ARM ARMv8 G1.11.3 Asynchronous exception masking controls
+     * (table G1-18/G1-19) */
     switch (excp_idx) {
     case EXCP_FIQ:
-        if (irq_can_hyp && (env->cp15.hcr_el2 & HCR_FMO)) {
-            return true;
+        if (arm_feature(env, ARM_FEATURE_EL3) && arm_el_is_aa64(env, 3)) {
+            /* If EL3 is using Aarch64 and FIQs are routed to EL3 masking is
+             * ignored in all exception levels except EL3.
+             */
+            if ((env->cp15.scr_el3 & SCR_FIQ) && cur_el < 3) {
+                return true;
+            }
+            /* If we are in EL3 but FIQs are not routed to EL3 the exception
+             * is not taken but remains pending.
+             */
+            if (!(env->cp15.scr_el3 & SCR_FIQ) && cur_el == 3) {
+                return false;
+            }
+        }
+        if (!secure) {
+            if (arm_feature(env, ARM_FEATURE_EL2)) {
+                if (env->cp15.hcr_el2 & HCR_FMO) {
+                    /* CPSR.F/PSTATE.F ignored if
+                     *  - exception is taken from Non-secure state
+                     *  - HCR.FMO == 1
+                     *  - either:  - not in Hyp mode
+                     *             - SCR.FIQ routes exception to monitor mode
+                     *               (EL3 in Aarch32)
+                     */
+                    if (cur_el < 2) {
+                        return true;
+                    } else if (arm_feature(env, ARM_FEATURE_EL3) &&
+                            (env->cp15.scr_el3 & SCR_FIQ) &&
+                            !arm_el_is_aa64(env, 3)) {
+                        return true;
+                    }
+                } else if (arm_el_is_aa64(env, 3) &&
+                          (env->cp15.scr_el3 & SCR_RW) &&
+                          cur_el == 2) {
+                    /* FIQs not routed to EL2 but currently in EL2 (A64).
+                     * Exception is not taken but remains pending. */
+                    return false;
+                }
+            }
+            /* In ARMv7 only applies if both Security Extensions (EL3) and
+             * Hypervirtualization Extensions (EL2) implemented, while
+             * for ARMv8 it applies also if only EL3 implemented.
+             */
+            if (arm_feature(env, ARM_FEATURE_EL3) &&
+                    (arm_feature(env, ARM_FEATURE_EL2) ||
+                            arm_feature(env, ARM_FEATURE_V8))) {
+                /* CPSR.F/PSTATE.F ignored if
+                 * - exception is taken from Non-secure state
+                 * - SCR.FIQ routes exception to monitor mode
+                 * - SCR.FW bit is set to 0
+                 * - HCR.FMO == 0 (if EL2 implemented)
+                 */
+                if ((env->cp15.scr_el3 & SCR_FIQ) &&
+                        !(env->cp15.scr_el3 & SCR_FW)) {
+                    if (!arm_feature(env, ARM_FEATURE_EL2)) {
+                        return true;
+                    } else if (!(env->cp15.hcr_el2 & HCR_FMO)) {
+                        return true;
+                    }
+                }
+            }
         }
         return !(env->daif & PSTATE_F);
     case EXCP_IRQ:
-        if (irq_can_hyp && (env->cp15.hcr_el2 & HCR_IMO)) {
-            return true;
+        if (arm_feature(env, ARM_FEATURE_EL3) && arm_el_is_aa64(env, 3)) {
+            /* If EL3 is using Aarch64 and IRQs are routed to EL3 masking is
+             * ignored in all exception levels except EL3.
+             */
+            if ((env->cp15.scr_el3 & SCR_IRQ) && cur_el < 3) {
+                return true;
+            }
+            /* If we are in EL3 but IRQ s are not routed to EL3 the exception
+             * is not taken but remains pending.
+             */
+            if (!(env->cp15.scr_el3 & SCR_IRQ) && cur_el == 3) {
+                return false;
+            }
+        }
+        if (!secure) {
+            if (arm_feature(env, ARM_FEATURE_EL2)) {
+                if (env->cp15.hcr_el2 & HCR_IMO) {
+                    /* CPSR.I/PSTATE.I ignored if
+                     *  - exception is taken from Non-secure state
+                     *  - HCR.IMO == 1
+                     *  - either:  - not in Hyp mode
+                     *             - SCR.IRQ routes exception to monitor mode
+                     *                (EL3 in Aarch32)
+                     */
+                    if (cur_el < 2) {
+                        return true;
+                    } else if (arm_feature(env, ARM_FEATURE_EL3) &&
+                            (env->cp15.scr_el3 & SCR_IRQ) &&
+                            !arm_el_is_aa64(env, 3)) {
+                        return true;
+                    }
+                } else if (arm_el_is_aa64(env, 3) &&
+                          (env->cp15.scr_el3 & SCR_RW) &&
+                          cur_el == 2) {
+                    /* IRQs not routed to EL2 but currently in EL2 (A64).
+                     * Exception is not taken but remains pending. */
+                    return false;
+                }
+            }
         }
         return irq_unmasked;
     case EXCP_VFIQ:
-- 
1.8.3.2

  parent reply	other threads:[~2014-09-30 21:50 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-30 21:49 [Qemu-devel] [PATCH v5 00/33] target-arm: add Security Extensions for CPUs Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 01/33] target-arm: increase arrays of registers R13 & R14 Greg Bellows
2014-10-06 14:48   ` Peter Maydell
2014-10-06 19:21   ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 02/33] target-arm: add arm_is_secure() function Greg Bellows
2014-09-30 22:50   ` Edgar E. Iglesias
2014-10-01 12:53     ` Greg Bellows
2014-10-06 14:56   ` Peter Maydell
2014-10-06 17:57     ` Sergey Fedorov
2014-10-06 18:01       ` Peter Maydell
2014-10-06 19:45     ` Greg Bellows
2014-10-06 20:07       ` Peter Maydell
2014-10-06 20:47         ` Greg Bellows
2014-10-06 21:07           ` Peter Maydell
2014-10-08 19:33             ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 03/33] target-arm: reject switching to monitor mode Greg Bellows
2014-10-06 15:02   ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 04/33] target-arm: rename arm_current_pl to arm_current_el Greg Bellows
2014-09-30 22:56   ` Edgar E. Iglesias
2014-10-01 12:54     ` Greg Bellows
2014-10-06 15:10   ` Peter Maydell
2014-10-06 19:55     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 05/33] target-arm: make arm_current_pl() return PL3 Greg Bellows
2014-10-01  1:23   ` Sergey Fedorov
2014-10-01 14:31     ` Greg Bellows
2014-10-06 15:34   ` Peter Maydell
2014-10-06 20:53     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 06/33] target-arm: A32: Emulate the SMC instruction Greg Bellows
2014-10-06 15:46   ` Peter Maydell
2014-10-07  1:56     ` Greg Bellows
2014-09-30 21:49 ` Greg Bellows [this message]
2014-10-06 15:53   ` [Qemu-devel] [PATCH v5 07/33] target-arm: extend async excp masking Peter Maydell
2014-10-07  3:16     ` Greg Bellows
2014-10-07  7:03       ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 08/33] target-arm: add async excp target_el function Greg Bellows
2014-10-06 16:02   ` Peter Maydell
2014-10-07  3:52     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 09/33] target-arm: add macros to access banked registers Greg Bellows
2014-10-06 16:09   ` Peter Maydell
2014-10-07  4:02     ` Greg Bellows
2014-10-07  6:54       ` Peter Maydell
2014-10-07 17:49         ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 10/33] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-06 16:13   ` Peter Maydell
2014-10-06 18:10     ` Sergey Fedorov
2014-10-07  4:21       ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 11/33] target-arm: arrayfying fieldoffset for banking Greg Bellows
2014-10-06 16:19   ` Peter Maydell
2014-10-07  5:06     ` Greg Bellows
2014-10-07  7:12       ` Peter Maydell
2014-10-07 21:50         ` Greg Bellows
2014-10-07 22:38           ` Peter Maydell
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 12/33] target-arm: insert Aarch32 cpregs twice into hashtable Greg Bellows
2014-10-06 16:25   ` Peter Maydell
2014-10-07  5:31     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 13/33] target-arm: move Aarch32 SCR into security reglist Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 14/33] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 15/33] target-arm: Respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 16/33] target-arm: add NSACR register Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 17/33] target-arm: add SDER definition Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 18/33] target-arm: add MVBAR support Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 19/33] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 20/33] target-arm: make CSSELR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 21/33] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 22/33] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-09-30 23:18   ` Edgar E. Iglesias
2014-10-01 13:05     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 23/33] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 24/33] target-arm: make DACR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 25/33] target-arm: make IFSR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 26/33] target-arm: make DFSR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 27/33] target-arm: make IFAR/DFAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 28/33] target-arm: make PAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 29/33] target-arm: make VBAR banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 30/33] target-arm: make MAIR0/1 banked Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 31/33] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-01 14:30   ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 32/33] target-arm: add GDB scr register Greg Bellows
2014-10-06 16:27   ` Peter Maydell
2014-10-07  5:09     ` Greg Bellows
2014-09-30 21:49 ` [Qemu-devel] [PATCH v5 33/33] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
2014-10-06 16:28   ` Peter Maydell
2014-10-06 16:32 ` [Qemu-devel] [PATCH v5 00/33] target-arm: add Security Extensions for CPUs Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412113785-21525-8-git-send-email-greg.bellows@linaro.org \
    --to=greg.bellows@linaro.org \
    --cc=aggelerf@ethz.ch \
    --cc=edgar.iglesias@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).