[Qemu-devel] [PATCH v4 00/47] Postcopy implementation

["Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>]

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

Hi,
  This is the 4th cut of my version of postcopy; it is designed for use with
the Linux kernel additions just posted by Andrea Arcangeli here:

http://marc.info/?l=linux-kernel&m=141235633015100&w=2

(Note: This is a new version compared to my previous postcopy patchset; you'll
need to update the kernel to the new version.)

Other than the new kernel ABI (which is only a small change to the userspace side);
the major changes are;

  a) Code for host page size != target page size
  b) Support for migration over fd 
     From Cristian Klein; this is for libvirt support which Cristian recently
     posted to the libvirt list.
  c) It's now build bisectable and builds on 32bit

Testing wise; I've now done many thousand of postcopy migrations without
failure (both of idle and busy guests); so it seems pretty solid.

Must-TODO's:
  1) A partially repeatable migration_cancel failure
  2) virt_test's migrate.with_reboot test is failing
  3) The ACPI fix in 2.1 that allowed migrating RAMBlocks to be larger than
    the source feels like it needs looking at for postcopy.
  4) Paolo's comments with respect to the wakeup_request/is_running code
     in the migration thread
  5) xbzrle needs disabling once in postcopy

Later-TODO's:
  1) Control the rate of background page transfers during postcopy to
     reduce their impact on the latency of postcopy requests.
  2) Work with RDMA
  3) Could destination RP be made blocking (as per discussion with Paolo;
     I'm still worried that that changes too many assumptions)



V4:
  Initial support for host page size != target page size
    - tested heavily on hps==tps
    - only partially tested on hps!=tps systems
    - This involved quite a bit of rework around the discard code
  Updated to new kernel userfault ABI
    - It won't work with the previous version
  Fix mis-optimisation of postcopy request for wrong RAMBlock
     request for block A offset n
     un-needed fault for block B/m (already received - no req sent)
     request for block B/l  - wrongly sent as request for A/l
  Fix thinko in discard bitmap processing (missed last word of bitmap)
     Symptom: remap failures near the top of RAM if postcopy started late
  Fix bug that caused kernel page acknowledgments to be misaligned
     May have meant the guest was paused for longer than required
  Fix potential for crashing cleaning up failed RP
  Fixes in docs (from Yang)
  Handle migration by fd as sockets if they are sockets
  Build tested on 32bit
  Fully build bisectable (x86-64)


Dave

Cristian Klein (1):
  Handle bi-directional communication for fd migration

Dr. David Alan Gilbert (46):
  QEMUSizedBuffer based QEMUFile
  Tests: QEMUSizedBuffer/QEMUBuffer
  Start documenting how postcopy works.
  qemu_ram_foreach_block: pass up error value, and down the ramblock
    name
  improve DPRINTF macros, add to savevm
  Add qemu_get_counted_string to read a string prefixed by a count byte
  Create MigrationIncomingState
  socket shutdown
  Provide runtime Target page information
  Return path: Open a return path on QEMUFile for sockets
  Return path: socket_writev_buffer: Block even on non-blocking fd's
  Migration commands
  Return path: Control commands
  Return path: Send responses from destination to source
  Return path: Source handling of return path
  qemu_loadvm errors and debug
  ram_debug_dump_bitmap: Dump a migration bitmap as text
  Rework loadvm path for subloops
  Add migration-capability boolean for postcopy-ram.
  Add wrappers and handlers for sending/receiving the postcopy-ram
    migration messages.
  QEMU_VM_CMD_PACKAGED: Send a packaged chunk of migration stream
  migrate_init: Call from savevm
  Allow savevm handlers to state whether they could go into postcopy
  postcopy: OS support test
  migrate_start_postcopy: Command to trigger transition to postcopy
  MIG_STATE_POSTCOPY_ACTIVE: Add new migration state
  qemu_savevm_state_complete: Postcopy changes
  Postcopy page-map-incoming (PMI) structure
  Postcopy: Maintain sentmap and calculate discard
  postcopy: Incoming initialisation
  postcopy: ram_enable_notify to switch on userfault
  Postcopy: Postcopy startup in migration thread
  Postcopy: Create a fault handler thread before marking the ram as
    userfault
  Page request:  Add MIG_RPCOMM_REQPAGES reverse command
  Page request: Process incoming page request
  Page request: Consume pages off the post-copy queue
  Add assertion to check migration_dirty_pages
  postcopy_ram.c: place_page and helpers
  Postcopy: Use helpers to map pages during migration
  qemu_ram_block_from_host
  Don't sync dirty bitmaps in postcopy
  Host page!=target page: Cleanup bitmaps
  Postcopy; Handle userfault requests
  Start up a postcopy/listener thread ready for incoming page data
  postcopy: Wire up loadvm_postcopy_ram_handle_{run,end} commands
  End of migration for postcopy

 Makefile.objs                    |    2 +-
 arch_init.c                      |  739 +++++++++++++++++++++++++--
 docs/migration.txt               |  189 +++++++
 exec.c                           |   76 ++-
 hmp-commands.hx                  |   15 +
 hmp.c                            |    7 +
 hmp.h                            |    1 +
 include/exec/cpu-common.h        |    8 +-
 include/migration/migration.h    |  130 +++++
 include/migration/postcopy-ram.h |  106 ++++
 include/migration/qemu-file.h    |   47 ++
 include/migration/vmstate.h      |    2 +-
 include/qemu/sockets.h           |    1 +
 include/qemu/typedefs.h          |    9 +-
 include/sysemu/sysemu.h          |   43 +-
 migration-fd.c                   |   24 +-
 migration-rdma.c                 |    4 +-
 migration.c                      |  693 +++++++++++++++++++++++++-
 postcopy-ram.c                   | 1016 ++++++++++++++++++++++++++++++++++++++
 qapi-schema.json                 |   14 +-
 qemu-file.c                      |  598 +++++++++++++++++++++-
 qmp-commands.hx                  |   19 +
 savevm.c                         |  881 +++++++++++++++++++++++++++++++--
 tests/Makefile                   |    2 +-
 tests/test-vmstate.c             |   74 +--
 util/qemu-sockets.c              |   28 ++
 26 files changed, 4550 insertions(+), 178 deletions(-)
 create mode 100644 include/migration/postcopy-ram.h
 create mode 100644 postcopy-ram.c

-- 
1.9.3