[Qemu-devel] [PATCH v4 37/47] Page request: Consume pages off the post-copy queue

["Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>]

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

When transmitting RAM pages, consume pages that have been queued by
MIG_RPCOMM_REQPAGE commands and send them ahead of normal page scanning.

Note:
  a) After a queued page the linear walk carries on from after the
unqueued page; there is a reasonable chance that the destination
was about to ask for other closeby pages anyway.

  b) We have to be careful of any assumptions that the page walking
code makes, in particular it does some short cuts on its first linear
walk that break as soon as we do a queued page.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 arch_init.c | 149 ++++++++++++++++++++++++++++++++++++++++++++++++++----------
 1 file changed, 125 insertions(+), 24 deletions(-)

diff --git a/arch_init.c b/arch_init.c
index 72f9e17..a945990 100644
--- a/arch_init.c
+++ b/arch_init.c
@@ -331,6 +331,7 @@ static RAMBlock *last_seen_block;
 /* This is the last block from where we have sent data */
 static RAMBlock *last_sent_block;
 static ram_addr_t last_offset;
+static bool last_was_from_queue;
 static unsigned long *migration_bitmap;
 static uint64_t migration_dirty_pages;
 static uint32_t last_version;
@@ -460,6 +461,19 @@ static inline bool migration_bitmap_set_dirty(ram_addr_t addr)
     return ret;
 }
 
+static inline bool migration_bitmap_clear_dirty(ram_addr_t addr)
+{
+    bool ret;
+    int nr = addr >> TARGET_PAGE_BITS;
+
+    ret = test_and_clear_bit(nr, migration_bitmap);
+
+    if (ret) {
+        migration_dirty_pages--;
+    }
+    return ret;
+}
+
 static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
 {
     ram_addr_t addr;
@@ -660,6 +674,39 @@ static int ram_save_page(QEMUFile *f, RAMBlock* block, ram_addr_t offset,
 }
 
 /*
+ * Unqueue a page from the queue fed by postcopy page requests
+ *
+ * Returns:   The RAMBlock* to transmit from (or NULL if the queue is empty)
+ *      ms:   MigrationState in
+ *  offset:   the byte offset within the RAMBlock for the start of the page
+ * bitoffset: global offset in the dirty/sent bitmaps
+ */
+static RAMBlock *ram_save_unqueue_page(MigrationState *ms, ram_addr_t *offset,
+                                       unsigned long *bitoffset)
+{
+    RAMBlock *result = NULL;
+    qemu_mutex_lock(&ms->src_page_req_mutex);
+    if (!QSIMPLEQ_EMPTY(&ms->src_page_requests)) {
+        struct MigrationSrcPageRequest *entry =
+                                    QSIMPLEQ_FIRST(&ms->src_page_requests);
+        result = entry->rb;
+        *offset = entry->offset;
+        *bitoffset = (entry->offset + entry->rb->offset) >> TARGET_PAGE_BITS;
+
+        if (entry->len > TARGET_PAGE_SIZE) {
+            entry->len -= TARGET_PAGE_SIZE;
+            entry->offset += TARGET_PAGE_SIZE;
+        } else {
+            QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
+            g_free(entry);
+        }
+    }
+    qemu_mutex_unlock(&ms->src_page_req_mutex);
+
+    return result;
+}
+
+/*
  * Queue the pages for transmission, e.g. a request from postcopy destination
  *   ms: MigrationStatus in which the queue is held
  *   rbname: The RAMBlock the request is for - may be NULL (to mean reuse last)
@@ -720,44 +767,97 @@ int ram_save_queue_pages(MigrationState *ms, const char *rbname,
 
 static int ram_find_and_save_block(QEMUFile *f, bool last_stage)
 {
+    MigrationState *ms = migrate_get_current();
     RAMBlock *block = last_seen_block;
+    RAMBlock *tmpblock;
     ram_addr_t offset = last_offset;
+    ram_addr_t tmpoffset;
     bool complete_round = false;
     int bytes_sent = 0;
-    MemoryRegion *mr;
     unsigned long bitoffset;
+    unsigned long hps = sysconf(_SC_PAGESIZE);
 
-    if (!block)
+    if (!block) {
         block = QTAILQ_FIRST(&ram_list.blocks);
+        last_was_from_queue = false;
+    }
 
-    while (true) {
-        mr = block->mr;
-        offset = migration_bitmap_find_and_reset_dirty(mr, offset, &bitoffset);
-        if (complete_round && block == last_seen_block &&
-            offset >= last_offset) {
-            break;
+    while (true) { /* Until we send a block or run out of stuff to send */
+        tmpblock = NULL;
+
+        /*
+         * Don't break host-page chunks up with queue items
+         * so only unqueue if,
+         *   a) The last item came from the queue anyway
+         *   b) The last sent item was the last target-page in a host page
+         */
+        if (last_was_from_queue || (!last_sent_block) ||
+            ((last_offset & (hps - 1)) == (hps - TARGET_PAGE_SIZE))) {
+            tmpblock = ram_save_unqueue_page(ms, &tmpoffset, &bitoffset);
         }
-        if (offset >= block->length) {
-            offset = 0;
-            block = QTAILQ_NEXT(block, next);
-            if (!block) {
-                block = QTAILQ_FIRST(&ram_list.blocks);
-                complete_round = true;
-                ram_bulk_stage = false;
+
+        if (tmpblock) {
+            /* We've got a block from the postcopy queue */
+            DPRINTF("%s: Got postcopy item '%s' offset=%zx bitoffset=%zx",
+                    __func__, tmpblock->idstr, tmpoffset, bitoffset);
+            /* We're sending this page, and since it's postcopy nothing else
+             * will dirty it, and we must make sure it doesn't get sent again.
+             */
+            if (!migration_bitmap_clear_dirty(bitoffset << TARGET_PAGE_BITS)) {
+                DPRINTF("%s: Not dirty for postcopy %s/%zx bito=%zx (sent=%d)",
+                        __func__, tmpblock->idstr, tmpoffset, bitoffset,
+                        test_bit(bitoffset, ms->sentmap));
+                continue;
             }
+            /*
+             * As soon as we start servicing pages out of order, then we have
+             * to kill the bulk stage, since the bulk stage assumes
+             * in (migration_bitmap_find_and_reset_dirty) that every page is
+             * dirty, that's no longer true.
+             */
+            ram_bulk_stage = false;
+            /*
+             * We mustn't change block/offset unless it's to a valid one
+             * otherwise we can go down some of the exit cases in the normal
+             * path.
+             */
+            block = tmpblock;
+            offset = tmpoffset;
+            last_was_from_queue = true;
         } else {
-            bytes_sent = ram_save_page(f, block, offset, last_stage);
-
-            /* if page is unmodified, continue to the next */
-            if (bytes_sent > 0) {
-                MigrationState *s = migrate_get_current();
-                if (s->sentmap) {
-                    set_bit(bitoffset, s->sentmap);
+            MemoryRegion *mr;
+            /* priority queue empty, so just search for something dirty */
+            mr = block->mr;
+            offset = migration_bitmap_find_and_reset_dirty(mr, offset,
+                                                           &bitoffset);
+            if (complete_round && block == last_seen_block &&
+                offset >= last_offset) {
+                break;
+            }
+            if (offset >= block->length) {
+                offset = 0;
+                block = QTAILQ_NEXT(block, next);
+                if (!block) {
+                    block = QTAILQ_FIRST(&ram_list.blocks);
+                    complete_round = true;
+                    ram_bulk_stage = false;
                 }
+                continue; /* pick an offset in the new block */
+            }
+            last_was_from_queue = false;
+        }
 
-                last_sent_block = block;
-                break;
+        /* We have a page to send, so send it */
+        bytes_sent = ram_save_page(f, block, offset, last_stage);
+
+        /* if page is unmodified, continue to the next */
+        if (bytes_sent > 0) {
+            if (ms->sentmap) {
+                set_bit(bitoffset, ms->sentmap);
             }
+
+            last_sent_block = block;
+            break;
         }
     }
     last_seen_block = block;
@@ -851,6 +951,7 @@ static void reset_ram_globals(void)
     last_offset = 0;
     last_version = ram_list.version;
     ram_bulk_stage = true;
+    last_was_from_queue = false;
 }
 
 #define MAX_WAIT 50 /* ms, half buffered_file limit */
-- 
1.9.3