[Qemu-devel] [PULL 18/23] drive_del-test: Merge of qdev-monitor-test, blockdev-test

[Stefan Hajnoczi <stefanha@redhat.com>]

From: Markus Armbruster <armbru@redhat.com>

Each of qdev-monitor-test and blockdev-test has just one test case,
and both are about drive_del.

[Extended copyright from 2013 to 2013-2014 as requested by Eric Blake.
--Stefan]

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1412261496-24455-2-git-send-email-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
---
 tests/Makefile            |   5 +--
 tests/blockdev-test.c     |  59 -------------------------
 tests/drive_del-test.c    | 110 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/qdev-monitor-test.c |  77 --------------------------------
 4 files changed, 112 insertions(+), 139 deletions(-)
 delete mode 100644 tests/blockdev-test.c
 create mode 100644 tests/drive_del-test.c
 delete mode 100644 tests/qdev-monitor-test.c

diff --git a/tests/Makefile b/tests/Makefile
index 834279c..ffa8312 100644
--- a/tests/Makefile
+++ b/tests/Makefile
@@ -140,8 +140,7 @@ check-qtest-i386-y += tests/bios-tables-test$(EXESUF)
 check-qtest-i386-y += tests/rtc-test$(EXESUF)
 check-qtest-i386-y += tests/i440fx-test$(EXESUF)
 check-qtest-i386-y += tests/fw_cfg-test$(EXESUF)
-check-qtest-i386-y += tests/blockdev-test$(EXESUF)
-check-qtest-i386-y += tests/qdev-monitor-test$(EXESUF)
+check-qtest-i386-y += tests/drive_del-test$(EXESUF)
 check-qtest-i386-y += tests/wdt_ib700-test$(EXESUF)
 gcov-files-i386-y += hw/watchdog/watchdog.c hw/watchdog/wdt_ib700.c
 check-qtest-i386-y += $(check-qtest-pci-y)
@@ -335,7 +334,7 @@ tests/tpci200-test$(EXESUF): tests/tpci200-test.o
 tests/display-vga-test$(EXESUF): tests/display-vga-test.o
 tests/ipoctal232-test$(EXESUF): tests/ipoctal232-test.o
 tests/qom-test$(EXESUF): tests/qom-test.o
-tests/blockdev-test$(EXESUF): tests/blockdev-test.o $(libqos-pc-obj-y)
+tests/drive_del-test$(EXESUF): tests/drive_del-test.o $(libqos-pc-obj-y)
 tests/qdev-monitor-test$(EXESUF): tests/qdev-monitor-test.o $(libqos-pc-obj-y)
 tests/nvme-test$(EXESUF): tests/nvme-test.o
 tests/pvpanic-test$(EXESUF): tests/pvpanic-test.o
diff --git a/tests/blockdev-test.c b/tests/blockdev-test.c
deleted file mode 100644
index c940e00..0000000
--- a/tests/blockdev-test.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * blockdev.c test cases
- *
- * Copyright (C) 2013 Red Hat Inc.
- *
- * Authors:
- *  Stefan Hajnoczi <stefanha@redhat.com>
- *
- * This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
- * See the COPYING.LIB file in the top-level directory.
- */
-
-#include <glib.h>
-#include <string.h>
-#include "libqtest.h"
-
-static void test_drive_add_empty(void)
-{
-    QDict *response;
-    const char *response_return;
-
-    /* Start with an empty drive */
-    qtest_start("-drive if=none,id=drive0");
-
-    /* Delete the drive */
-    response = qmp("{\"execute\": \"human-monitor-command\","
-                   " \"arguments\": {"
-                   "   \"command-line\": \"drive_del drive0\""
-                   "}}");
-    g_assert(response);
-    response_return = qdict_get_try_str(response, "return");
-    g_assert(response_return);
-    g_assert(strcmp(response_return, "") == 0);
-    QDECREF(response);
-
-    /* Ensure re-adding the drive works - there should be no duplicate ID error
-     * because the old drive must be gone.
-     */
-    response = qmp("{\"execute\": \"human-monitor-command\","
-                   " \"arguments\": {"
-                   "   \"command-line\": \"drive_add 0 if=none,id=drive0\""
-                   "}}");
-    g_assert(response);
-    response_return = qdict_get_try_str(response, "return");
-    g_assert(response_return);
-    g_assert(strcmp(response_return, "OK\r\n") == 0);
-    QDECREF(response);
-
-    qtest_end();
-}
-
-int main(int argc, char **argv)
-{
-    g_test_init(&argc, &argv, NULL);
-
-    qtest_add_func("/qmp/drive_add_empty", test_drive_add_empty);
-
-    return g_test_run();
-}
diff --git a/tests/drive_del-test.c b/tests/drive_del-test.c
new file mode 100644
index 0000000..39c56fc
--- /dev/null
+++ b/tests/drive_del-test.c
@@ -0,0 +1,110 @@
+/*
+ * blockdev.c test cases
+ *
+ * Copyright (C) 2013-2014 Red Hat Inc.
+ *
+ * Authors:
+ *  Stefan Hajnoczi <stefanha@redhat.com>
+ *
+ * This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
+ * See the COPYING.LIB file in the top-level directory.
+ */
+
+#include <glib.h>
+#include <string.h>
+#include "libqtest.h"
+
+static void test_drive_without_dev(void)
+{
+    QDict *response;
+    const char *response_return;
+
+    /* Start with an empty drive */
+    qtest_start("-drive if=none,id=drive0");
+
+    /* Delete the drive */
+    response = qmp("{\"execute\": \"human-monitor-command\","
+                   " \"arguments\": {"
+                   "   \"command-line\": \"drive_del drive0\""
+                   "}}");
+    g_assert(response);
+    response_return = qdict_get_try_str(response, "return");
+    g_assert(response_return);
+    g_assert(strcmp(response_return, "") == 0);
+    QDECREF(response);
+
+    /* Ensure re-adding the drive works - there should be no duplicate ID error
+     * because the old drive must be gone.
+     */
+    response = qmp("{\"execute\": \"human-monitor-command\","
+                   " \"arguments\": {"
+                   "   \"command-line\": \"drive_add 0 if=none,id=drive0\""
+                   "}}");
+    g_assert(response);
+    response_return = qdict_get_try_str(response, "return");
+    g_assert(response_return);
+    g_assert(strcmp(response_return, "OK\r\n") == 0);
+    QDECREF(response);
+
+    qtest_end();
+}
+
+static void test_after_failed_device_add(void)
+{
+    QDict *response;
+    QDict *error;
+
+    qtest_start("-drive if=none,id=drive0");
+
+    /* Make device_add fail.  If this leaks the virtio-blk-pci device then a
+     * reference to drive0 will also be held (via qdev properties).
+     */
+    response = qmp("{\"execute\": \"device_add\","
+                   " \"arguments\": {"
+                   "   \"driver\": \"virtio-blk-pci\","
+                   "   \"drive\": \"drive0\""
+                   "}}");
+    g_assert(response);
+    error = qdict_get_qdict(response, "error");
+    g_assert_cmpstr(qdict_get_try_str(error, "class"), ==, "GenericError");
+    QDECREF(response);
+
+    /* Delete the drive */
+    response = qmp("{\"execute\": \"human-monitor-command\","
+                   " \"arguments\": {"
+                   "   \"command-line\": \"drive_del drive0\""
+                   "}}");
+    g_assert(response);
+    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "");
+    QDECREF(response);
+
+    /* Try to re-add the drive.  This fails with duplicate IDs if a leaked
+     * virtio-blk-pci exists that holds a reference to the old drive0.
+     */
+    response = qmp("{\"execute\": \"human-monitor-command\","
+                   " \"arguments\": {"
+                   "   \"command-line\": \"drive_add pci-addr=auto if=none,id=drive0\""
+                   "}}");
+    g_assert(response);
+    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "OK\r\n");
+    QDECREF(response);
+
+    qtest_end();
+}
+
+int main(int argc, char **argv)
+{
+    const char *arch = qtest_get_arch();
+
+    g_test_init(&argc, &argv, NULL);
+
+    qtest_add_func("/drive_del/without-dev", test_drive_without_dev);
+
+    /* TODO I guess any arch with PCI would do */
+    if (!strcmp(arch, "i386") || !strcmp(arch, "x86_64")) {
+        qtest_add_func("/drive_del/after_failed_device_add",
+                       test_after_failed_device_add);
+    }
+
+    return g_test_run();
+}
diff --git a/tests/qdev-monitor-test.c b/tests/qdev-monitor-test.c
deleted file mode 100644
index e20ffd6..0000000
--- a/tests/qdev-monitor-test.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * qdev-monitor.c test cases
- *
- * Copyright (C) 2013 Red Hat Inc.
- *
- * Authors:
- *  Stefan Hajnoczi <stefanha@redhat.com>
- *
- * This work is licensed under the terms of the GNU LGPL, version 2.1 or later.
- * See the COPYING.LIB file in the top-level directory.
- */
-
-#include <string.h>
-#include <glib.h>
-#include "libqtest.h"
-#include "qapi/qmp/qjson.h"
-
-static void test_device_add(void)
-{
-    QDict *response;
-    QDict *error;
-
-    qtest_start("-drive if=none,id=drive0");
-
-    /* Make device_add fail.  If this leaks the virtio-blk-pci device then a
-     * reference to drive0 will also be held (via qdev properties).
-     */
-    response = qmp("{\"execute\": \"device_add\","
-                   " \"arguments\": {"
-                   "   \"driver\": \"virtio-blk-pci\","
-                   "   \"drive\": \"drive0\""
-                   "}}");
-    g_assert(response);
-    error = qdict_get_qdict(response, "error");
-    g_assert_cmpstr(qdict_get_try_str(error, "class"), ==, "GenericError");
-    QDECREF(response);
-
-    /* Delete the drive */
-    response = qmp("{\"execute\": \"human-monitor-command\","
-                   " \"arguments\": {"
-                   "   \"command-line\": \"drive_del drive0\""
-                   "}}");
-    g_assert(response);
-    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "");
-    QDECREF(response);
-
-    /* Try to re-add the drive.  This fails with duplicate IDs if a leaked
-     * virtio-blk-pci exists that holds a reference to the old drive0.
-     */
-    response = qmp("{\"execute\": \"human-monitor-command\","
-                   " \"arguments\": {"
-                   "   \"command-line\": \"drive_add pci-addr=auto if=none,id=drive0\""
-                   "}}");
-    g_assert(response);
-    g_assert_cmpstr(qdict_get_try_str(response, "return"), ==, "OK\r\n");
-    QDECREF(response);
-
-    qtest_end();
-}
-
-int main(int argc, char **argv)
-{
-    const char *arch = qtest_get_arch();
-
-    /* Check architecture */
-    if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
-        g_test_message("Skipping test for non-x86\n");
-        return 0;
-    }
-
-    /* Run the tests */
-    g_test_init(&argc, &argv, NULL);
-
-    qtest_add_func("/qmp/device_add", test_device_add);
-
-    return g_test_run();
-}
-- 
1.9.3