[Qemu-devel] [PATCH v6 12/32] target-arm: add secure state bit to CPREG hash

[Greg Bellows <greg.bellows@linaro.org>]

Added additional NS-bit to CPREG hash encoding.  Updated hash lookup
locations to specify hash bit currently set to non-secure.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>

==========

v5 -> v6
- Globally replace Aarch# with AArch#
---
 target-arm/cpu.h       | 25 ++++++++++++++++++++-----
 target-arm/helper.c    |  6 +++---
 target-arm/translate.c | 16 ++++++++++------
 3 files changed, 33 insertions(+), 14 deletions(-)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 4d8de9e..8ab3576 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -871,6 +871,7 @@ void armv7m_nvic_complete_irq(void *opaque, int irq);
  *  Crn, Crm, opc1, opc2 fields
  *  32 or 64 bit register (ie is it accessed via MRC/MCR
  *    or via MRRC/MCRR?)
+ *  non-secure/secure bank (AArch32 only)
  * We allow 4 bits for opc1 because MRRC/MCRR have a 4 bit field.
  * (In this case crn and opc2 should be zero.)
  * For AArch64, there is no 32/64 bit size distinction;
@@ -888,9 +889,16 @@ void armv7m_nvic_complete_irq(void *opaque, int irq);
 #define CP_REG_AA64_SHIFT 28
 #define CP_REG_AA64_MASK (1 << CP_REG_AA64_SHIFT)
 
-#define ENCODE_CP_REG(cp, is64, crn, crm, opc1, opc2)   \
-    (((cp) << 16) | ((is64) << 15) | ((crn) << 11) |    \
-     ((crm) << 7) | ((opc1) << 3) | (opc2))
+/* To enable banking of coprocessor registers depending on ns-bit we
+ * add a bit to distinguish between secure and non-secure cpregs in the
+ * hashtable.
+ */
+#define CP_REG_NS_SHIFT 29
+#define CP_REG_NS_MASK(nsbit) (nsbit << CP_REG_NS_SHIFT)
+
+#define ENCODE_CP_REG(cp, is64, crn, crm, opc1, opc2, ns)   \
+    (CP_REG_NS_MASK(ns) | ((cp) << 16) | ((is64) << 15) |   \
+     ((crn) << 11) | ((crm) << 7) | ((opc1) << 3) | (opc2))
 
 #define ENCODE_AA64_CP_REG(cp, crn, crm, op0, op1, op2) \
     (CP_REG_AA64_MASK |                                 \
@@ -909,8 +917,15 @@ static inline uint32_t kvm_to_cpreg_id(uint64_t kvmid)
     uint32_t cpregid = kvmid;
     if ((kvmid & CP_REG_ARCH_MASK) == CP_REG_ARM64) {
         cpregid |= CP_REG_AA64_MASK;
-    } else if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) {
-        cpregid |= (1 << 15);
+    } else {
+        if ((kvmid & CP_REG_SIZE_MASK) == CP_REG_SIZE_U64) {
+            cpregid |= (1 << 15);
+        }
+
+        /* KVM is always non-secure so add the NS flag on AArch32 register
+         * entries.
+         */
+         cpregid |= CP_REG_NS_MASK(SCR_NS);
     }
     return cpregid;
 }
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 9910f72..dfdf9d2 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3288,7 +3288,7 @@ CpuDefinitionInfoList *arch_query_cpu_definitions(Error **errp)
 
 static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
                                    void *opaque, int state,
-                                   int crm, int opc1, int opc2)
+                                   int crm, int opc1, int opc2, int nsbit)
 {
     /* Private utility function for define_one_arm_cp_reg_with_opaque():
      * add a single reginfo struct to the hash table.
@@ -3327,7 +3327,7 @@ static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r,
         *key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm,
                                   r2->opc0, opc1, opc2);
     } else {
-        *key = ENCODE_CP_REG(r2->cp, is64, r2->crn, crm, opc1, opc2);
+        *key = ENCODE_CP_REG(r2->cp, is64, r2->crn, crm, opc1, opc2, nsbit);
     }
     if (opaque) {
         r2->opaque = opaque;
@@ -3477,7 +3477,7 @@ void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu,
                         continue;
                     }
                     add_cpreg_to_hashtable(cpu, r, opaque, state,
-                                           crm, opc1, opc2);
+                                           crm, opc1, opc2, SCR_NS);
                 }
             }
         }
diff --git a/target-arm/translate.c b/target-arm/translate.c
index 6217dbb..442109c 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -712,7 +712,7 @@ static void gen_thumb2_parallel_addsub(int op1, int op2, TCGv_i32 a, TCGv_i32 b)
 
 /*
  * generate a conditional branch based on ARM condition code cc.
- * This is common between ARM and Aarch64 targets.
+ * This is common between ARM and AArch64 targets.
  */
 void arm_gen_test_cc(int cc, int label)
 {
@@ -7038,7 +7038,7 @@ static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn)
     rt = (insn >> 12) & 0xf;
 
     ri = get_arm_cp_reginfo(s->cp_regs,
-                            ENCODE_CP_REG(cpnum, is64, crn, crm, opc1, opc2));
+            ENCODE_CP_REG(cpnum, is64, crn, crm, opc1, opc2, s->ns));
     if (ri) {
         /* Check access permissions */
         if (!cp_access_ok(s->current_el, ri, isread)) {
@@ -7228,12 +7228,16 @@ static int disas_coproc_insn(CPUARMState * env, DisasContext *s, uint32_t insn)
      */
     if (is64) {
         qemu_log_mask(LOG_UNIMP, "%s access to unsupported AArch32 "
-                      "64 bit system register cp:%d opc1: %d crm:%d\n",
-                      isread ? "read" : "write", cpnum, opc1, crm);
+                      "64 bit system register cp:%d opc1: %d crm:%d "
+                      "(%s)\n",
+                      isread ? "read" : "write", cpnum, opc1, crm,
+                      s->ns ? "non-secure" : "secure");
     } else {
         qemu_log_mask(LOG_UNIMP, "%s access to unsupported AArch32 "
-                      "system register cp:%d opc1:%d crn:%d crm:%d opc2:%d\n",
-                      isread ? "read" : "write", cpnum, opc1, crn, crm, opc2);
+                      "system register cp:%d opc1:%d crn:%d crm:%d opc2:%d "
+                      "(%s)\n",
+                      isread ? "read" : "write", cpnum, opc1, crn, crm, opc2,
+                      s->ns ? "non-secure" : "secure");
     }
 
     return 1;
-- 
1.8.3.2