qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Leon Alrae <leon.alrae@imgtec.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 10/28] target-mips: move CLO, DCLO, CLZ, DCLZ, SDBBP and free special2 in R6
Date: Wed, 15 Oct 2014 10:54:02 +0100	[thread overview]
Message-ID: <1413366860-7833-11-git-send-email-leon.alrae@imgtec.com> (raw)
In-Reply-To: <1413366860-7833-1-git-send-email-leon.alrae@imgtec.com>

Also consider OPC_SPIM instruction as deleted in R6 because it is overlaping
with MIPS32R6 SDBBP.

Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
---
 disas/mips.c            |   5 ++
 target-mips/translate.c | 121 +++++++++++++++++++++++++-----------------------
 2 files changed, 67 insertions(+), 59 deletions(-)

diff --git a/disas/mips.c b/disas/mips.c
index 16cb2ac..8ee8758 100644
--- a/disas/mips.c
+++ b/disas/mips.c
@@ -1217,6 +1217,11 @@ const struct mips_opcode mips_builtin_opcodes[] =
    them first.  The assemblers uses a hash table based on the
    instruction name anyhow.  */
 /* name,    args,	match,	    mask,	pinfo,          	membership */
+{"clz",     "U,s",      0x00000050, 0xfc1f07ff, WR_d|RD_s,            0, I32R6},
+{"clo",     "U,s",      0x00000051, 0xfc1f07ff, WR_d|RD_s,            0, I32R6},
+{"dclz",    "U,s",      0x00000052, 0xfc1f07ff, WR_d|RD_s,            0, I64R6},
+{"dclo",    "U,s",      0x00000053, 0xfc1f07ff, WR_d|RD_s,            0, I64R6},
+{"sdbbp",   "B",        0x0000000e, 0xfc00003f, TRAP,                 0, I32R6},
 {"mul",     "d,s,t",    0x00000098, 0xfc0007ff, WR_d|RD_s|RD_t,       0, I32R6},
 {"muh",     "d,s,t",    0x000000d8, 0xfc0007ff, WR_d|RD_s|RD_t,       0, I32R6},
 {"mulu",    "d,s,t",    0x00000099, 0xfc0007ff, WR_d|RD_s|RD_t,       0, I32R6},
diff --git a/target-mips/translate.c b/target-mips/translate.c
index 3ce9641..34d63ea 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -235,6 +235,12 @@ enum {
     R6_OPC_DMOD   = OPC_DDIV   | (3 << 6),
     R6_OPC_DDIVU  = OPC_DDIVU  | (2 << 6),
     R6_OPC_DMODU  = OPC_DDIVU  | (3 << 6),
+
+    R6_OPC_CLZ      = 0x10 | OPC_SPECIAL,
+    R6_OPC_CLO      = 0x11 | OPC_SPECIAL,
+    R6_OPC_DCLZ     = 0x12 | OPC_SPECIAL,
+    R6_OPC_DCLO     = 0x13 | OPC_SPECIAL,
+    R6_OPC_SDBBP    = 0x0e | OPC_SPECIAL,
 };
 
 /* Multiplication variants of the vr54xx. */
@@ -3263,19 +3269,23 @@ static void gen_cl (DisasContext *ctx, uint32_t opc,
     gen_load_gpr(t0, rs);
     switch (opc) {
     case OPC_CLO:
+    case R6_OPC_CLO:
         gen_helper_clo(cpu_gpr[rd], t0);
         opn = "clo";
         break;
     case OPC_CLZ:
+    case R6_OPC_CLZ:
         gen_helper_clz(cpu_gpr[rd], t0);
         opn = "clz";
         break;
 #if defined(TARGET_MIPS64)
     case OPC_DCLO:
+    case R6_OPC_DCLO:
         gen_helper_dclo(cpu_gpr[rd], t0);
         opn = "dclo";
         break;
     case OPC_DCLZ:
+    case R6_OPC_DCLZ:
         gen_helper_dclz(cpu_gpr[rd], t0);
         opn = "dclz";
         break;
@@ -14747,12 +14757,13 @@ static void gen_mipsdsp_accinsn(DisasContext *ctx, uint32_t op1, uint32_t op2,
 
 static void decode_opc_special_r6(CPUMIPSState *env, DisasContext *ctx)
 {
-    int rs, rt, rd;
+    int rs, rt, rd, sa;
     uint32_t op1, op2;
 
     rs = (ctx->opcode >> 21) & 0x1f;
     rt = (ctx->opcode >> 16) & 0x1f;
     rd = (ctx->opcode >> 11) & 0x1f;
+    sa = (ctx->opcode >> 6) & 0x1f;
 
     op1 = MASK_SPECIAL(ctx->opcode);
     switch (op1) {
@@ -14779,7 +14790,31 @@ static void decode_opc_special_r6(CPUMIPSState *env, DisasContext *ctx)
     case OPC_SELNEZ:
         gen_cond_move(ctx, op1, rd, rs, rt);
         break;
+    case R6_OPC_CLO:
+    case R6_OPC_CLZ:
+        if (rt == 0 && sa == 1) {
+            /* Major opcode and function field is shared with preR6 MFHI/MTHI.
+               We need additionally to check other fields */
+            gen_cl(ctx, op1, rd, rs);
+        } else {
+            generate_exception(ctx, EXCP_RI);
+        }
+        break;
+    case R6_OPC_SDBBP:
+        generate_exception(ctx, EXCP_DBp);
+        break;
 #if defined(TARGET_MIPS64)
+    case R6_OPC_DCLO:
+    case R6_OPC_DCLZ:
+        if (rt == 0 && sa == 1) {
+            /* Major opcode and function field is shared with preR6 MFHI/MTHI.
+               We need additionally to check other fields */
+            check_mips_64(ctx);
+            gen_cl(ctx, op1, rd, rs);
+        } else {
+            generate_exception(ctx, EXCP_RI);
+        }
+        break;
     case OPC_DMULT ... OPC_DDIVU:
         op2 = MASK_R6_MULDIV(ctx->opcode);
         switch (op2) {
@@ -14865,6 +14900,16 @@ static void decode_opc_special_legacy(CPUMIPSState *env, DisasContext *ctx)
         gen_muldiv(ctx, op1, 0, rs, rt);
         break;
 #endif
+    case OPC_SPIM:
+#ifdef MIPS_STRICT_STANDARD
+        MIPS_INVAL("SPIM");
+        generate_exception(ctx, EXCP_RI);
+#else
+        /* Implemented as RI exception for now. */
+        MIPS_INVAL("spim (unofficial)");
+        generate_exception(ctx, EXCP_RI);
+#endif
+        break;
     default:            /* Invalid */
         MIPS_INVAL("special_legacy");
         generate_exception(ctx, EXCP_RI);
@@ -14959,16 +15004,6 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx)
     case OPC_BREAK:
         generate_exception(ctx, EXCP_BREAK);
         break;
-    case OPC_SPIM:
-#ifdef MIPS_STRICT_STANDARD
-        MIPS_INVAL("SPIM");
-        generate_exception(ctx, EXCP_RI);
-#else
-        /* Implemented as RI exception for now. */
-        MIPS_INVAL("spim (unofficial)");
-        generate_exception(ctx, EXCP_RI);
-#endif
-        break;
     case OPC_SYNC:
         /* Treat as NOP. */
         break;
@@ -15058,24 +15093,13 @@ static void decode_opc_special(CPUMIPSState *env, DisasContext *ctx)
     }
 }
 
-static void decode_opc_special2_r6(CPUMIPSState *env, DisasContext *ctx)
-{
-    uint32_t op1;
-
-    op1 = MASK_SPECIAL2(ctx->opcode);
-    switch (op1) {
-    default:            /* Invalid */
-        MIPS_INVAL("special2_r6");
-        generate_exception(ctx, EXCP_RI);
-        break;
-    }
-}
-
 static void decode_opc_special2_legacy(CPUMIPSState *env, DisasContext *ctx)
 {
     int rs, rt, rd;
     uint32_t op1;
 
+    check_insn_opc_removed(ctx, ISA_MIPS32R6);
+
     rs = (ctx->opcode >> 21) & 0x1f;
     rt = (ctx->opcode >> 16) & 0x1f;
     rd = (ctx->opcode >> 11) & 0x1f;
@@ -15099,34 +15123,6 @@ static void decode_opc_special2_legacy(CPUMIPSState *env, DisasContext *ctx)
         check_insn(ctx, INSN_LOONGSON2F);
         gen_loongson_integer(ctx, op1, rd, rs, rt);
         break;
-#if defined(TARGET_MIPS64)
-    case OPC_DMULT_G_2F:
-    case OPC_DMULTU_G_2F:
-    case OPC_DDIV_G_2F:
-    case OPC_DDIVU_G_2F:
-    case OPC_DMOD_G_2F:
-    case OPC_DMODU_G_2F:
-        check_insn(ctx, INSN_LOONGSON2F);
-        gen_loongson_integer(ctx, op1, rd, rs, rt);
-        break;
-#endif
-    default:            /* Invalid */
-        MIPS_INVAL("special2_legacy");
-        generate_exception(ctx, EXCP_RI);
-        break;
-    }
-}
-
-static void decode_opc_special2(CPUMIPSState *env, DisasContext *ctx)
-{
-    int rs, rd;
-    uint32_t op1;
-
-    rs = (ctx->opcode >> 21) & 0x1f;
-    rd = (ctx->opcode >> 11) & 0x1f;
-
-    op1 = MASK_SPECIAL2(ctx->opcode);
-    switch (op1) {
     case OPC_CLO:
     case OPC_CLZ:
         check_insn(ctx, ISA_MIPS32);
@@ -15151,13 +15147,20 @@ static void decode_opc_special2(CPUMIPSState *env, DisasContext *ctx)
         check_mips_64(ctx);
         gen_cl(ctx, op1, rd, rs);
         break;
+    case OPC_DMULT_G_2F:
+    case OPC_DMULTU_G_2F:
+    case OPC_DDIV_G_2F:
+    case OPC_DDIVU_G_2F:
+    case OPC_DMOD_G_2F:
+    case OPC_DMODU_G_2F:
+        check_insn(ctx, INSN_LOONGSON2F);
+        gen_loongson_integer(ctx, op1, rd, rs, rt);
+        break;
 #endif
-    default:
-        if (ctx->insn_flags & ISA_MIPS32R6) {
-            decode_opc_special2_r6(env, ctx);
-        } else {
-            decode_opc_special2_legacy(env, ctx);
-        }
+    default:            /* Invalid */
+        MIPS_INVAL("special2_legacy");
+        generate_exception(ctx, EXCP_RI);
+        break;
     }
 }
 
@@ -15839,7 +15842,7 @@ static void decode_opc (CPUMIPSState *env, DisasContext *ctx)
         decode_opc_special(env, ctx);
         break;
     case OPC_SPECIAL2:
-        decode_opc_special2(env, ctx);
+        decode_opc_special2_legacy(env, ctx);
         break;
     case OPC_SPECIAL3:
         decode_opc_special3(env, ctx);
-- 
2.1.0

  parent reply	other threads:[~2014-10-15  9:55 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-15  9:53 [Qemu-devel] [PULL 00/28] target-mips queue Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 01/28] target-mips: define ISA_MIPS64R6 Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 02/28] target-mips: signal RI Exception on instructions removed in R6 Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 03/28] target-mips: add SELEQZ and SELNEZ instructions Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 04/28] target-mips: move LL and SC instructions Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 05/28] target-mips: extract decode_opc_special* from decode_opc Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 06/28] target-mips: split decode_opc_special* into *_r6 and *_legacy Leon Alrae
2014-10-15  9:53 ` [Qemu-devel] [PULL 07/28] target-mips: signal RI Exception on DSP and Loongson instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 08/28] target-mips: move PREF, CACHE, LLD and SCD instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 09/28] target-mips: redefine Integer Multiply and Divide instructions Leon Alrae
2014-10-15  9:54 ` Leon Alrae [this message]
2014-10-15  9:54 ` [Qemu-devel] [PULL 11/28] target-mips: Status.UX/SX/KX enable 32-bit address wrapping Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 12/28] target-mips: add ALIGN, DALIGN, BITSWAP and DBITSWAP instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 13/28] target-mips: add compact and CP1 branches Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 14/28] target-mips: add AUI, LSA and PCREL instruction families Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 15/28] softfloat: add functions corresponding to IEEE-2008 min/maxNumMag Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 16/28] target-mips: add new Floating Point instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 17/28] target-mips: add new Floating Point Comparison instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 18/28] target-mips: do not allow Status.FR=0 mode in 64-bit FPU Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 19/28] target-mips: remove JR, BLTZAL, BGEZAL and add NAL, BAL instructions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 20/28] mips_malta: update malta's pseudo-bootloader - replace JR with JALR Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 21/28] target-mips: define a new generic CPU supporting MIPS64 Release 6 ISA Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 22/28] target-mips/translate.c: Update OPC_SYNCI Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 23/28] target-mips: fix broken MIPS16 and microMIPS Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 24/28] target-mips/dsp_helper.c: Remove unused function get_DSPControl_24() Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 25/28] target-mips/op_helper.c: Remove unused do_lbu() function Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 26/28] target-mips/translate.c: Add ifdef guard around check_mips64() Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 27/28] target-mips/dsp_helper.c: Add ifdef guards around various functions Leon Alrae
2014-10-15  9:54 ` [Qemu-devel] [PULL 28/28] target-mips: Remove unused gen_load_ACX, gen_store_ACX and cpu_ACX Leon Alrae
2014-10-16  9:49 ` [Qemu-devel] [PULL 00/28] target-mips queue Peter Maydell
2014-10-16  9:59   ` Leon Alrae
2014-10-22 12:08 ` Peter Maydell
2014-10-22 12:22   ` Peter Maydell
2014-10-22 12:32     ` Leon Alrae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413366860-7833-11-git-send-email-leon.alrae@imgtec.com \
    --to=leon.alrae@imgtec.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).