From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v7 17/32] target-arm: add NSACR register
Date: Tue, 21 Oct 2014 11:55:29 -0500 [thread overview]
Message-ID: <1413910544-20150-18-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1413910544-20150-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Implements NSACR register with corresponding read/write functions
for ARMv7 and ARMv8.
Signed-off-by: Sergey Fedorov <s.fedorov@samsung.com>
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
----------
v4 -> v5
- Changed to use renamed arm_current_el()
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
target-arm/cpu.h | 6 +++++
target-arm/helper.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 73 insertions(+), 1 deletion(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 4273621..f9221a4 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -181,6 +181,7 @@ typedef struct CPUARMState {
uint64_t c1_sys; /* System control register. */
uint64_t c1_coproc; /* Coprocessor access register. */
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
+ uint32_t c1_nsacr; /* Non-secure access control register. */
uint64_t ttbr0_el1; /* MMU translation table base 0. */
uint64_t ttbr1_el1; /* MMU translation table base 1. */
uint64_t c2_control; /* MMU translation table base control. */
@@ -634,6 +635,11 @@ static inline void xpsr_write(CPUARMState *env, uint32_t val, uint32_t mask)
#define SCR_AARCH32_MASK (0x3fff & ~(SCR_RW | SCR_ST))
#define SCR_AARCH64_MASK (0x3fff & ~SCR_NET)
+#define NSACR_NSTRCDIS (1U << 20)
+#define NSACR_RFR (1U << 19)
+#define NSACR_NSASEDIS (1U << 15)
+#define NSACR_NSD32DIS (1U << 14)
+
/* Return the current FPSCR value. */
uint32_t vfp_get_fpscr(CPUARMState *env);
void vfp_set_fpscr(CPUARMState *env, uint32_t val);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 2af8fbb..f12181f 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -520,7 +520,19 @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* VFP coprocessor: cp10 & cp11 [23:20] */
mask |= (1 << 31) | (1 << 30) | (0xf << 20);
- if (!arm_feature(env, ARM_FEATURE_NEON)) {
+ if (arm_feature(env, ARM_FEATURE_NEON)) {
+ /* NSACR can disable non-secure writes to
+ * ASEDIS [31] or D32DIS [30]
+ */
+ if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env)) {
+ if ((env->cp15.c1_nsacr & NSACR_NSASEDIS)) {
+ mask &= ~(1 << 31);
+ }
+ if ((env->cp15.c1_nsacr & NSACR_NSD32DIS)) {
+ mask &= ~(1 << 30);
+ }
+ }
+ } else {
/* ASEDIS [31] bit is RAO/WI */
value |= (1 << 31);
}
@@ -532,6 +544,7 @@ static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
!arm_feature(env, ARM_FEATURE_VFP3)) {
/* D32DIS [30] is RAO/WI if D16-31 are not implemented. */
value |= (1 << 30);
+ mask |= (1 << 30);
}
}
value &= mask;
@@ -2310,6 +2323,55 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
REGINFO_SENTINEL
};
+static void nsacr_write(CPUARMState *env, const ARMCPRegInfo *ri,
+ uint64_t value)
+{
+ uint32_t mask = 0;
+
+ /* Pre ARMv8 some bits are RAO or UNK/SBZP */
+ if (!arm_feature(env, ARM_FEATURE_V8)) {
+
+ if (arm_feature(env, ARM_FEATURE_VFP)) {
+ mask |= NSACR_NSASEDIS | NSACR_NSD32DIS;
+
+ if (!arm_feature(env, ARM_FEATURE_NEON)) {
+ /* NSASEDIS are RAO/WI */
+ value |= NSACR_NSASEDIS;
+ }
+
+ /* VFPv3 and upwards with NEON implement 32 double precision
+ * registers (D0-D31).
+ */
+ if (!arm_feature(env, ARM_FEATURE_NEON) ||
+ !arm_feature(env, ARM_FEATURE_VFP3)) {
+ /* NSD32DIS is RAO/WI if D16-31 are not implemented. */
+ value |= NSACR_NSD32DIS;
+ }
+ }
+
+ /* cpn bits [13:0] */
+ mask = 0x3fff;
+
+ value &= mask;
+ }
+
+ raw_write(env, ri, value);
+}
+
+static uint64_t nsacr_read(CPUARMState *env, const ARMCPRegInfo *ri)
+{
+ uint64_t ret = raw_read(env, ri);
+
+ if (arm_feature(env, ARM_FEATURE_V8)) {
+ if (!arm_feature(env, ARM_FEATURE_EL3) || (
+ arm_el_is_aa64(env, 3) && !is_a64(env) &&
+ arm_current_el(env) != 3)) {
+ ret = 0x0000C00;
+ }
+ }
+ return ret;
+}
+
static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
@@ -2347,6 +2409,10 @@ static const ARMCPRegInfo v7_el3_cp_reginfo[] = {
{ .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
.access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
.resetvalue = 0, .writefn = scr_write},
+ { .name = "NSACR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 2,
+ .access = PL3_RW | PL1_R, .resetvalue = 0,
+ .writefn = nsacr_write, .readfn = nsacr_read,
+ .fieldoffset = offsetof(CPUARMState, cp15.c1_nsacr) },
REGINFO_SENTINEL
};
--
1.8.3.2
next prev parent reply other threads:[~2014-10-21 16:56 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 16:55 [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 01/32] target-arm: increase arrays of registers R13 & R14 Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 02/32] target-arm: add arm_is_secure() function Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 03/32] target-arm: reject switching to monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 04/32] target-arm: rename arm_current_pl to arm_current_el Greg Bellows
2014-10-23 14:53 ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 05/32] target-arm: make arm_current_el() return EL3 Greg Bellows
2015-01-16 18:36 ` Peter Maydell
2015-01-19 13:22 ` Peter Maydell
2015-01-19 17:44 ` Richard Henderson
2015-01-19 19:00 ` Peter Maydell
2015-01-19 19:30 ` Richard Henderson
2015-01-19 22:54 ` Edgar E. Iglesias
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 06/32] target-arm: A32: Emulate the SMC instruction Greg Bellows
2014-10-23 14:06 ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 07/32] target-arm: extend async excp masking Greg Bellows
2014-10-24 16:25 ` Peter Maydell
2014-10-24 22:43 ` Greg Bellows
2014-10-26 22:30 ` Peter Maydell
2014-10-27 11:57 ` Peter Maydell
2014-10-27 15:59 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 08/32] target-arm: add async excp target_el function Greg Bellows
2014-10-24 16:26 ` Peter Maydell
2014-10-28 14:50 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 09/32] target-arm: add banked register accessors Greg Bellows
2014-10-24 16:37 ` Peter Maydell
2014-10-28 18:42 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 10/32] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-24 16:40 ` Peter Maydell
2014-10-28 15:21 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 11/32] target-arm: add CPREG secure state support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 12/32] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 13/32] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 14/32] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 15/32] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 16/32] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-21 16:55 ` Greg Bellows [this message]
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 18/32] target-arm: add SDER definition Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 19/32] target-arm: add MVBAR support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 20/32] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 21/32] target-arm: make CSSELR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 22/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 23/32] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 24/32] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 25/32] target-arm: make DACR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 26/32] target-arm: make IFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 27/32] target-arm: make DFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 28/32] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 29/32] target-arm: make PAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 30/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 31/32] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 32/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
2014-10-23 14:19 ` [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413910544-20150-18-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).