qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
	serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v7 22/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked
Date: Tue, 21 Oct 2014 11:55:34 -0500	[thread overview]
Message-ID: <1413910544-20150-23-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1413910544-20150-1-git-send-email-greg.bellows@linaro.org>

From: Fabian Aggeler <aggelerf@ethz.ch>

Add TTBR0 and maps secure/non-secure instance of ttbr0 and ttbr1
accordingly (translation table base register).

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>

==========

v5 -> v6
- Changed _el field variants to be array based
- Merged TTBR# and TTBR#_EL1 reginfo entries
- Globally replace Aarch# with AArch#

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
 hw/arm/pxa2xx.c     |  4 ++--
 target-arm/cpu.h    | 20 ++++++++++++++++++--
 target-arm/helper.c | 54 +++++++++++++++++++++++++++++++++++++++--------------
 3 files changed, 60 insertions(+), 18 deletions(-)

diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 0114597..13261d0 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -274,7 +274,7 @@ static void pxa2xx_pwrmode_write(CPUARMState *env, const ARMCPRegInfo *ri,
         s->cpu->env.daif = PSTATE_A | PSTATE_F | PSTATE_I;
         s->cpu->env.cp15.sctlr_ns = 0;
         s->cpu->env.cp15.c1_coproc = 0;
-        s->cpu->env.cp15.ttbr0_el1 = 0;
+        s->cpu->env.cp15.ttbr0_el[1] = 0;
         s->cpu->env.cp15.c3 = 0;
         s->pm_regs[PSSR >> 2] |= 0x8; /* Set STS */
         s->pm_regs[RCSR >> 2] |= 0x8; /* Set GPR */
@@ -2046,7 +2046,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
     }
     if (!revision)
         revision = "pxa270";
-    
+
     s->cpu = cpu_arm_init(revision);
     if (s->cpu == NULL) {
         fprintf(stderr, "Unable to find CPU definition\n");
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 8b98c62..f31b2d4 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -199,8 +199,24 @@ typedef struct CPUARMState {
         uint32_t c1_xscaleauxcr; /* XScale auxiliary control register.  */
         uint32_t c1_sder; /* Secure debug enable register. */
         uint32_t c1_nsacr; /* Non-secure access control register. */
-        uint64_t ttbr0_el1; /* MMU translation table base 0. */
-        uint64_t ttbr1_el1; /* MMU translation table base 1. */
+        union { /* MMU translation table base 0. */
+            struct {
+                uint64_t _unused_ttbr0_0;
+                uint64_t ttbr0_ns;
+                uint64_t _unused_ttbr0_1;
+                uint64_t ttbr0_s;
+            };
+            uint64_t ttbr0_el[4];
+        };
+        union { /* MMU translation table base 1. */
+            struct {
+                uint64_t _unused_ttbr1_0;
+                uint64_t ttbr1_ns;
+                uint64_t _unused_ttbr1_1;
+                uint64_t ttbr1_s;
+            };
+            uint64_t ttbr1_el[4];
+        };
         uint64_t c2_control; /* MMU translation table base control.  */
         uint32_t c2_mask; /* MMU translation table base selection mask.  */
         uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index a8fe482..34e5829 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1658,14 +1658,16 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
       .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
       .access = PL1_RW,
       .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
-    { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
-      .writefn = vmsa_ttbr_write, .resetvalue = 0 },
-    { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
-      .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
-      .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+    { .name = "TTBR0", .state = ARM_CP_STATE_BOTH,
+      .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+      .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+                             offsetof(CPUARMState, cp15.ttbr0_ns) } },
+    { .name = "TTBR1", .state = ARM_CP_STATE_BOTH,
+      .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
+      .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+                             offsetof(CPUARMState, cp15.ttbr1_ns) } },
     { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
       .access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1896,11 +1898,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
       .fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
     { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
-      .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+                             offsetof(CPUARMState, cp15.ttbr0_ns) },
       .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
     { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
       .access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
-      .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+                             offsetof(CPUARMState, cp15.ttbr1_ns) },
       .writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
     REGINFO_SENTINEL
 };
@@ -2403,6 +2407,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
       .opc0 = 3, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
       .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
       .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]) },
+    { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
+      .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) },
     { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
       .type = ARM_CP_NO_MIGRATE,
       .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4480,18 +4488,23 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot,
 static bool get_level1_table_address(CPUARMState *env, uint32_t *table,
                                          uint32_t address)
 {
+    /* We only get here if EL1 is running in AArch32. If EL3 is running in
+     * AArch32 there is a secure and non-secure instance of the translation
+     * table registers.
+     */
     if (address & env->cp15.c2_mask) {
         if ((env->cp15.c2_control & TTBCR_PD1)) {
             /* Translation table walk disabled for TTBR1 */
             return false;
         }
-        *table = env->cp15.ttbr1_el1 & 0xffffc000;
+        *table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
     } else {
         if ((env->cp15.c2_control & TTBCR_PD0)) {
             /* Translation table walk disabled for TTBR0 */
             return false;
         }
-        *table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+        *table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) &
+                 env->cp15.c2_base_mask;
     }
     *table |= (address >> 18) & 0x3ffc;
     return true;
@@ -4745,6 +4758,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
     int32_t granule_sz = 9;
     int32_t va_size = 32;
     int32_t tbi = 0;
+    uint32_t cur_el = arm_current_el(env);
 
     if (arm_el_is_aa64(env, 1)) {
         va_size = 64;
@@ -4796,7 +4810,19 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
      * we will always flush the TLB any time the ASID is changed).
      */
     if (ttbr_select == 0) {
-        ttbr = env->cp15.ttbr0_el1;
+        if (arm_el_is_aa64(env, 3)) {
+            switch (cur_el) {
+            case 3:
+                ttbr = env->cp15.ttbr0_el[3];
+                break;
+            case 1:
+            case 0:
+            default:
+                ttbr = env->cp15.ttbr0_el[1];
+            }
+        } else {
+            ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
+        }
         epd = extract32(env->cp15.c2_control, 7, 1);
         tsz = t0sz;
 
@@ -4808,7 +4834,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
             granule_sz = 11;
         }
     } else {
-        ttbr = env->cp15.ttbr1_el1;
+        ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
         epd = extract32(env->cp15.c2_control, 23, 1);
         tsz = t1sz;
 
-- 
1.8.3.2

  parent reply	other threads:[~2014-10-21 16:56 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21 16:55 [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 01/32] target-arm: increase arrays of registers R13 & R14 Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 02/32] target-arm: add arm_is_secure() function Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 03/32] target-arm: reject switching to monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 04/32] target-arm: rename arm_current_pl to arm_current_el Greg Bellows
2014-10-23 14:53   ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 05/32] target-arm: make arm_current_el() return EL3 Greg Bellows
2015-01-16 18:36   ` Peter Maydell
2015-01-19 13:22     ` Peter Maydell
2015-01-19 17:44       ` Richard Henderson
2015-01-19 19:00         ` Peter Maydell
2015-01-19 19:30           ` Richard Henderson
2015-01-19 22:54             ` Edgar E. Iglesias
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 06/32] target-arm: A32: Emulate the SMC instruction Greg Bellows
2014-10-23 14:06   ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 07/32] target-arm: extend async excp masking Greg Bellows
2014-10-24 16:25   ` Peter Maydell
2014-10-24 22:43     ` Greg Bellows
2014-10-26 22:30       ` Peter Maydell
2014-10-27 11:57         ` Peter Maydell
2014-10-27 15:59           ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 08/32] target-arm: add async excp target_el function Greg Bellows
2014-10-24 16:26   ` Peter Maydell
2014-10-28 14:50     ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 09/32] target-arm: add banked register accessors Greg Bellows
2014-10-24 16:37   ` Peter Maydell
2014-10-28 18:42     ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 10/32] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-24 16:40   ` Peter Maydell
2014-10-28 15:21     ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 11/32] target-arm: add CPREG secure state support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 12/32] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 13/32] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 14/32] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 15/32] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 16/32] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 17/32] target-arm: add NSACR register Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 18/32] target-arm: add SDER definition Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 19/32] target-arm: add MVBAR support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 20/32] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 21/32] target-arm: make CSSELR banked Greg Bellows
2014-10-21 16:55 ` Greg Bellows [this message]
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 23/32] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 24/32] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 25/32] target-arm: make DACR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 26/32] target-arm: make IFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 27/32] target-arm: make DFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 28/32] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 29/32] target-arm: make PAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 30/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 31/32] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 32/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
2014-10-23 14:19 ` [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413910544-20150-23-git-send-email-greg.bellows@linaro.org \
    --to=greg.bellows@linaro.org \
    --cc=aggelerf@ethz.ch \
    --cc=edgar.iglesias@gmail.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=serge.fdrv@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).