From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v7 23/32] target-arm: add TCR_EL3 and make TTBCR banked
Date: Tue, 21 Oct 2014 11:55:35 -0500 [thread overview]
Message-ID: <1413910544-20150-24-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1413910544-20150-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Adds TCR_EL3 system register and makes existing TTBCR banked. Adjust
translation functions to use TCR/TTBCR instance depending on CPU state.
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
==========
v5 -> v6
- Changed _el field variants to be array based
v4 -> v5
- Changed c2_mask updates to use the TTBCR cpreg bank flag for selcting the
secure bank instead of the A32_BANKED_CURRENT macro. This more accurately
chooses the correct bank matching that of the TTBCR being accessed.
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
target-arm/cpu.h | 10 +++++++++-
target-arm/helper.c | 48 +++++++++++++++++++++++++++++++++++-------------
target-arm/internals.h | 2 +-
3 files changed, 45 insertions(+), 15 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index f31b2d4..76c4ef8 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -217,7 +217,15 @@ typedef struct CPUARMState {
};
uint64_t ttbr1_el[4];
};
- uint64_t c2_control; /* MMU translation table base control. */
+ union { /* MMU translation table base control. */
+ struct {
+ uint64_t _unused_ttbcr_0;
+ uint64_t ttbcr_ns;
+ uint64_t _unused_ttbcr_1;
+ uint64_t ttbcr_s;
+ };
+ uint64_t tcr_el[4];
+ };
uint32_t c2_mask; /* MMU translation table base selection mask. */
uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
uint32_t c2_data; /* MPU data cachable bits. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 34e5829..caab8ce 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1672,11 +1672,12 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .writefn = vmsa_tcr_el1_write,
.resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write,
- .fieldoffset = offsetof(CPUARMState, cp15.c2_control) },
+ .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) },
{ .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .type = ARM_CP_NO_MIGRATE, .writefn = vmsa_ttbcr_write,
.resetfn = arm_cp_reset_ignore, .raw_writefn = vmsa_ttbcr_raw_write,
- .fieldoffset = offsetoflow32(CPUARMState, cp15.c2_control) },
+ .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ttbcr_s),
+ offsetoflow32(CPUARMState, cp15.ttbcr_ns) } },
/* 64-bit FAR; this entry also gives us the AArch32 DFAR */
{ .name = "FAR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0,
@@ -2411,6 +2412,11 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
.fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) },
+ { .name = "TCR_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 2,
+ .access = PL3_RW, .writefn = vmsa_tcr_el1_write,
+ .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write,
+ .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[3]) },
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4493,13 +4499,13 @@ static bool get_level1_table_address(CPUARMState *env, uint32_t *table,
* table registers.
*/
if (address & env->cp15.c2_mask) {
- if ((env->cp15.c2_control & TTBCR_PD1)) {
+ if (A32_BANKED_CURRENT_REG_GET(env, ttbcr) & TTBCR_PD1) {
/* Translation table walk disabled for TTBR1 */
return false;
}
*table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
} else {
- if ((env->cp15.c2_control & TTBCR_PD0)) {
+ if (A32_BANKED_CURRENT_REG_GET(env, ttbcr) & TTBCR_PD0) {
/* Translation table walk disabled for TTBR0 */
return false;
}
@@ -4759,13 +4765,29 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
int32_t va_size = 32;
int32_t tbi = 0;
uint32_t cur_el = arm_current_el(env);
+ uint64_t tcr;
- if (arm_el_is_aa64(env, 1)) {
+ if (arm_el_is_aa64(env, 3)) {
+ switch (cur_el) {
+ case 3:
+ tcr = env->cp15.tcr_el[3];
+ break;
+ case 1:
+ case 0:
+ default:
+ tcr = env->cp15.tcr_el[1];
+ }
+
+ } else {
+ tcr = A32_BANKED_CURRENT_REG_GET(env, ttbcr);
+ }
+
+ if (arm_el_is_aa64(env, 1) && (cur_el == 0 || cur_el == 1)) {
va_size = 64;
if (extract64(address, 55, 1))
- tbi = extract64(env->cp15.c2_control, 38, 1);
+ tbi = extract64(tcr, 38, 1);
else
- tbi = extract64(env->cp15.c2_control, 37, 1);
+ tbi = extract64(tcr, 37, 1);
tbi *= 8;
}
@@ -4774,12 +4796,12 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* This is a Non-secure PL0/1 stage 1 translation, so controlled by
* TTBCR/TTBR0/TTBR1 in accordance with ARM ARM DDI0406C table B-32:
*/
- uint32_t t0sz = extract32(env->cp15.c2_control, 0, 6);
+ uint32_t t0sz = extract32(tcr, 0, 6);
if (arm_el_is_aa64(env, 1)) {
t0sz = MIN(t0sz, 39);
t0sz = MAX(t0sz, 16);
}
- uint32_t t1sz = extract32(env->cp15.c2_control, 16, 6);
+ uint32_t t1sz = extract32(tcr, 16, 6);
if (arm_el_is_aa64(env, 1)) {
t1sz = MIN(t1sz, 39);
t1sz = MAX(t1sz, 16);
@@ -4823,10 +4845,10 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
} else {
ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
}
- epd = extract32(env->cp15.c2_control, 7, 1);
+ epd = extract32(tcr, 7, 1);
tsz = t0sz;
- tg = extract32(env->cp15.c2_control, 14, 2);
+ tg = extract32(tcr, 14, 2);
if (tg == 1) { /* 64KB pages */
granule_sz = 13;
}
@@ -4835,10 +4857,10 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
}
} else {
ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
- epd = extract32(env->cp15.c2_control, 23, 1);
+ epd = extract32(tcr, 23, 1);
tsz = t1sz;
- tg = extract32(env->cp15.c2_control, 30, 2);
+ tg = extract32(tcr, 30, 2);
if (tg == 3) { /* 64KB pages */
granule_sz = 13;
}
diff --git a/target-arm/internals.h b/target-arm/internals.h
index 2dff4ff..8c451c6 100644
--- a/target-arm/internals.h
+++ b/target-arm/internals.h
@@ -155,7 +155,7 @@ static inline bool extended_addresses_enabled(CPUARMState *env)
{
return arm_el_is_aa64(env, 1)
|| ((arm_feature(env, ARM_FEATURE_LPAE)
- && (env->cp15.c2_control & TTBCR_EAE)));
+ && (A32_BANKED_CURRENT_REG_GET(env, ttbcr) & TTBCR_EAE)));
}
/* Valid Syndrome Register EC field values */
--
1.8.3.2
next prev parent reply other threads:[~2014-10-21 16:56 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 16:55 [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 01/32] target-arm: increase arrays of registers R13 & R14 Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 02/32] target-arm: add arm_is_secure() function Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 03/32] target-arm: reject switching to monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 04/32] target-arm: rename arm_current_pl to arm_current_el Greg Bellows
2014-10-23 14:53 ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 05/32] target-arm: make arm_current_el() return EL3 Greg Bellows
2015-01-16 18:36 ` Peter Maydell
2015-01-19 13:22 ` Peter Maydell
2015-01-19 17:44 ` Richard Henderson
2015-01-19 19:00 ` Peter Maydell
2015-01-19 19:30 ` Richard Henderson
2015-01-19 22:54 ` Edgar E. Iglesias
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 06/32] target-arm: A32: Emulate the SMC instruction Greg Bellows
2014-10-23 14:06 ` Peter Maydell
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 07/32] target-arm: extend async excp masking Greg Bellows
2014-10-24 16:25 ` Peter Maydell
2014-10-24 22:43 ` Greg Bellows
2014-10-26 22:30 ` Peter Maydell
2014-10-27 11:57 ` Peter Maydell
2014-10-27 15:59 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 08/32] target-arm: add async excp target_el function Greg Bellows
2014-10-24 16:26 ` Peter Maydell
2014-10-28 14:50 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 09/32] target-arm: add banked register accessors Greg Bellows
2014-10-24 16:37 ` Peter Maydell
2014-10-28 18:42 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 10/32] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-24 16:40 ` Peter Maydell
2014-10-28 15:21 ` Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 11/32] target-arm: add CPREG secure state support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 12/32] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 13/32] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 14/32] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 15/32] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 16/32] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 17/32] target-arm: add NSACR register Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 18/32] target-arm: add SDER definition Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 19/32] target-arm: add MVBAR support Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 20/32] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 21/32] target-arm: make CSSELR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 22/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Greg Bellows
2014-10-21 16:55 ` Greg Bellows [this message]
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 24/32] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 25/32] target-arm: make DACR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 26/32] target-arm: make IFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 27/32] target-arm: make DFSR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 28/32] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 29/32] target-arm: make PAR banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 30/32] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 31/32] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-21 16:55 ` [Qemu-devel] [PATCH v7 32/32] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
2014-10-23 14:19 ` [Qemu-devel] [PATCH v7 00/32] target-arm: add Security Extensions for CPUs Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413910544-20150-24-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).