From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, rth@twiddle.net
Subject: [Qemu-devel] [PATCH 4/5] target-tricore: Add instructions of BRR opcode format
Date: Wed, 29 Oct 2014 13:22:20 +0000 [thread overview]
Message-ID: <1414588941-845-5-git-send-email-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <1414588941-845-1-git-send-email-kbastian@mail.uni-paderborn.de>
Add instructions of BRR opcode format.
Add MASK_OP_BRR_DISP15_SEXT.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
---
target-tricore/translate.c | 89 +++++++++++++++++++++++++++++++++++++++-
target-tricore/tricore-opcodes.h | 1 +
2 files changed, 88 insertions(+), 2 deletions(-)
diff --git a/target-tricore/translate.c b/target-tricore/translate.c
index 0c69f1f..17eb8a7 100644
--- a/target-tricore/translate.c
+++ b/target-tricore/translate.c
@@ -567,7 +567,7 @@ static void gen_loop(DisasContext *ctx, int r1, int32_t offset)
static void gen_compute_branch(DisasContext *ctx, uint32_t opc, int r1,
int r2 , int32_t constant , int32_t offset)
{
- TCGv temp;
+ TCGv temp, temp2;
int l1, n;
switch (opc) {
@@ -725,6 +725,78 @@ static void gen_compute_branch(DisasContext *ctx, uint32_t opc, int r1,
gen_goto_tb(ctx, 1, ctx->pc + offset * 2);
tcg_temp_free(temp);
break;
+/* BRR Format */
+ case OPCM_32_BRR_EQ_NEQ:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_JEQ) {
+ gen_branch_cond(ctx, TCG_COND_EQ, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ } else {
+ gen_branch_cond(ctx, TCG_COND_NE, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ }
+ break;
+ case OPCM_32_BRR_ADDR_EQ_NEQ:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_JEQ_A) {
+ gen_branch_cond(ctx, TCG_COND_EQ, cpu_gpr_a[r1], cpu_gpr_a[r2],
+ offset);
+ } else {
+ gen_branch_cond(ctx, TCG_COND_NE, cpu_gpr_a[r1], cpu_gpr_a[r2],
+ offset);
+ }
+ break;
+ case OPCM_32_BRR_GE:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_JGE) {
+ gen_branch_cond(ctx, TCG_COND_GE, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ } else {
+ gen_branch_cond(ctx, TCG_COND_GEU, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ }
+ break;
+ case OPCM_32_BRR_JLT:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_JLT) {
+ gen_branch_cond(ctx, TCG_COND_LT, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ } else {
+ gen_branch_cond(ctx, TCG_COND_LTU, cpu_gpr_d[r1], cpu_gpr_d[r2],
+ offset);
+ }
+ break;
+ case OPCM_32_BRR_LOOP:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_LOOP) {
+ gen_loop(ctx, r1, offset * 2);
+ } else {
+ gen_save_pc(ctx->pc + offset * 2);
+ }
+ break;
+ case OPCM_32_BRR_JNE:
+ temp = tcg_temp_new();
+ temp2 = tcg_temp_new();
+ if (MASK_OP_BRC_OP2(ctx->opcode) == OPC2_32_BRR_JNED) {
+ tcg_gen_mov_tl(temp, cpu_gpr_d[r1]);
+ /* also save r2, in case of r1 == r2, so r2 is not decremented */
+ tcg_gen_mov_tl(temp2, cpu_gpr_d[r2]);
+ /* subi is unconditional */
+ tcg_gen_subi_tl(cpu_gpr_d[r1], cpu_gpr_d[r1], 1);
+ gen_branch_cond(ctx, TCG_COND_NE, temp, temp2, offset);
+ } else {
+ tcg_gen_mov_tl(temp, cpu_gpr_d[r1]);
+ /* also save r2, in case of r1 == r2, so r2 is not decremented */
+ tcg_gen_mov_tl(temp2, cpu_gpr_d[r2]);
+ /* addi is unconditional */
+ tcg_gen_addi_tl(cpu_gpr_d[r1], cpu_gpr_d[r1], 1);
+ gen_branch_cond(ctx, TCG_COND_NE, temp, temp2, offset);
+ }
+ tcg_temp_free(temp);
+ tcg_temp_free(temp2);
+ break;
+ case OPCM_32_BRR_JNZ:
+ if (MASK_OP_BRR_OP2(ctx->opcode) == OPC2_32_BRR_JNZ_A) {
+ gen_branch_condi(ctx, TCG_COND_NE, cpu_gpr_a[r1], 0, offset);
+ } else {
+ gen_branch_condi(ctx, TCG_COND_EQ, cpu_gpr_a[r1], 0, offset);
+ }
+ break;
default:
printf("Branch Error at %x\n", ctx->pc);
}
@@ -2382,7 +2454,7 @@ static void decode_bol_opc(CPUTriCoreState *env, DisasContext *ctx, int32_t op1)
static void decode_32Bit_opc(CPUTriCoreState *env, DisasContext *ctx)
{
int op1;
- int32_t r1;
+ int32_t r1, r2;
int32_t address;
int8_t b, const4;
int32_t bpos;
@@ -2534,6 +2606,19 @@ static void decode_32Bit_opc(CPUTriCoreState *env, DisasContext *ctx)
r1 = MASK_OP_BRN_S1(ctx->opcode);
gen_compute_branch(ctx, op1, r1, 0, 0, address);
break;
+/* BRR Format */
+ case OPCM_32_BRR_EQ_NEQ:
+ case OPCM_32_BRR_ADDR_EQ_NEQ:
+ case OPCM_32_BRR_GE:
+ case OPCM_32_BRR_JLT:
+ case OPCM_32_BRR_JNE:
+ case OPCM_32_BRR_JNZ:
+ case OPCM_32_BRR_LOOP:
+ address = MASK_OP_BRR_DISP15_SEXT(ctx->opcode);
+ r2 = MASK_OP_BRR_S2(ctx->opcode);
+ r1 = MASK_OP_BRR_S1(ctx->opcode);
+ gen_compute_branch(ctx, op1, r1, r2, 0, address);
+ break;
}
}
diff --git a/target-tricore/tricore-opcodes.h b/target-tricore/tricore-opcodes.h
index 3622d38..7d35e3e 100644
--- a/target-tricore/tricore-opcodes.h
+++ b/target-tricore/tricore-opcodes.h
@@ -139,6 +139,7 @@
/* BRR Format */
#define MASK_OP_BRR_OP2(op) MASK_BITS_SHIFT(op, 31, 31)
#define MASK_OP_BRR_DISP15(op) MASK_BITS_SHIFT(op, 16, 30)
+#define MASK_OP_BRR_DISP15_SEXT(op) MASK_BITS_SHIFT_SEXT(op, 16, 30)
#define MASK_OP_BRR_S2(op) MASK_BITS_SHIFT(op, 12, 15)
#define MASK_OP_BRR_S1(op) MASK_BITS_SHIFT(op, 8, 11)
--
2.1.2
next prev parent reply other threads:[~2014-10-29 12:22 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-29 13:22 [Qemu-devel] [PATCH 0/5] Add TriCore BOL, BRC, BRN, BRR and RC instructions Bastian Koppelmann
2014-10-29 13:22 ` [Qemu-devel] [PATCH 1/5] target-tricore: Add instructions of BOL opcode format Bastian Koppelmann
2014-10-30 1:20 ` Richard Henderson
2014-10-30 1:21 ` Richard Henderson
2014-10-29 13:22 ` [Qemu-devel] [PATCH 2/5] target-tricore: Add instructions of BRC " Bastian Koppelmann
2014-10-30 1:32 ` Richard Henderson
2014-10-29 13:22 ` [Qemu-devel] [PATCH 3/5] target-tricore: Add instructions of BRN " Bastian Koppelmann
2014-10-30 1:56 ` Richard Henderson
2014-10-29 13:22 ` Bastian Koppelmann [this message]
2014-10-30 2:30 ` [Qemu-devel] [PATCH 4/5] target-tricore: Add instructions of BRR " Richard Henderson
2014-10-29 13:22 ` [Qemu-devel] [PATCH 5/5] target-tricore: Add instructions of RC " Bastian Koppelmann
2014-10-30 2:56 ` Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414588941-845-5-git-send-email-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).