From: Greg Bellows <greg.bellows@linaro.org>
To: qemu-devel@nongnu.org, peter.maydell@linaro.org,
serge.fdrv@gmail.com, edgar.iglesias@gmail.com, aggelerf@ethz.ch
Cc: greg.bellows@linaro.org
Subject: [Qemu-devel] [PATCH v8 16/27] target-arm: add TTBR0_EL3 and make TTBR0/1 banked
Date: Thu, 30 Oct 2014 16:28:47 -0500 [thread overview]
Message-ID: <1414704538-17103-17-git-send-email-greg.bellows@linaro.org> (raw)
In-Reply-To: <1414704538-17103-1-git-send-email-greg.bellows@linaro.org>
From: Fabian Aggeler <aggelerf@ethz.ch>
Add TTBR0 and maps secure/non-secure instance of ttbr0 and ttbr1
accordingly (translation table base register).
Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
---
v5 -> v6
- Changed _el field variants to be array based
- Merged TTBR# and TTBR#_EL1 reginfo entries
- Globally replace Aarch# with AArch#
---
hw/arm/pxa2xx.c | 4 ++--
target-arm/cpu.h | 20 ++++++++++++++++++--
target-arm/helper.c | 54 +++++++++++++++++++++++++++++++++++++++--------------
3 files changed, 60 insertions(+), 18 deletions(-)
diff --git a/hw/arm/pxa2xx.c b/hw/arm/pxa2xx.c
index 11d51af..641b148 100644
--- a/hw/arm/pxa2xx.c
+++ b/hw/arm/pxa2xx.c
@@ -275,7 +275,7 @@ static void pxa2xx_pwrmode_write(CPUARMState *env, const ARMCPRegInfo *ri,
s->cpu->env.daif = PSTATE_A | PSTATE_F | PSTATE_I;
s->cpu->env.cp15.sctlr_ns = 0;
s->cpu->env.cp15.c1_coproc = 0;
- s->cpu->env.cp15.ttbr0_el1 = 0;
+ s->cpu->env.cp15.ttbr0_el[1] = 0;
s->cpu->env.cp15.c3 = 0;
s->pm_regs[PSSR >> 2] |= 0x8; /* Set STS */
s->pm_regs[RCSR >> 2] |= 0x8; /* Set GPR */
@@ -2047,7 +2047,7 @@ PXA2xxState *pxa270_init(MemoryRegion *address_space,
}
if (!revision)
revision = "pxa270";
-
+
s->cpu = cpu_arm_init(revision);
if (s->cpu == NULL) {
fprintf(stderr, "Unable to find CPU definition\n");
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 3b776a1..fe96869 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -199,8 +199,24 @@ typedef struct CPUARMState {
uint32_t c1_xscaleauxcr; /* XScale auxiliary control register. */
uint64_t sder; /* Secure debug enable register. */
uint32_t nsacr; /* Non-secure access control register. */
- uint64_t ttbr0_el1; /* MMU translation table base 0. */
- uint64_t ttbr1_el1; /* MMU translation table base 1. */
+ union { /* MMU translation table base 0. */
+ struct {
+ uint64_t _unused_ttbr0_0;
+ uint64_t ttbr0_ns;
+ uint64_t _unused_ttbr0_1;
+ uint64_t ttbr0_s;
+ };
+ uint64_t ttbr0_el[4];
+ };
+ union { /* MMU translation table base 1. */
+ struct {
+ uint64_t _unused_ttbr1_0;
+ uint64_t ttbr1_ns;
+ uint64_t _unused_ttbr1_1;
+ uint64_t ttbr1_s;
+ };
+ uint64_t ttbr1_el[4];
+ };
uint64_t c2_control; /* MMU translation table base control. */
uint32_t c2_mask; /* MMU translation table base selection mask. */
uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index f6a9b66..598f0d1 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1645,14 +1645,16 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0,
.access = PL1_RW,
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
- { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
- .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
- { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
- .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ { .name = "TTBR0", .state = ARM_CP_STATE_BOTH,
+ .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) } },
+ { .name = "TTBR1", .state = ARM_CP_STATE_BOTH,
+ .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_ns) } },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1883,11 +1885,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
{ .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
REGINFO_SENTINEL
};
@@ -2341,6 +2345,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.opc0 = 3, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]) },
+ { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) },
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -4422,18 +4430,23 @@ static inline int check_ap(CPUARMState *env, int ap, int domain_prot,
static bool get_level1_table_address(CPUARMState *env, uint32_t *table,
uint32_t address)
{
+ /* We only get here if EL1 is running in AArch32. If EL3 is running in
+ * AArch32 there is a secure and non-secure instance of the translation
+ * table registers.
+ */
if (address & env->cp15.c2_mask) {
if ((env->cp15.c2_control & TTBCR_PD1)) {
/* Translation table walk disabled for TTBR1 */
return false;
}
- *table = env->cp15.ttbr1_el1 & 0xffffc000;
+ *table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
} else {
if ((env->cp15.c2_control & TTBCR_PD0)) {
/* Translation table walk disabled for TTBR0 */
return false;
}
- *table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+ *table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) &
+ env->cp15.c2_base_mask;
}
*table |= (address >> 18) & 0x3ffc;
return true;
@@ -4687,6 +4700,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
int32_t granule_sz = 9;
int32_t va_size = 32;
int32_t tbi = 0;
+ uint32_t cur_el = arm_current_el(env);
if (arm_el_is_aa64(env, 1)) {
va_size = 64;
@@ -4738,7 +4752,19 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
* we will always flush the TLB any time the ASID is changed).
*/
if (ttbr_select == 0) {
- ttbr = env->cp15.ttbr0_el1;
+ if (arm_el_is_aa64(env, 3)) {
+ switch (cur_el) {
+ case 3:
+ ttbr = env->cp15.ttbr0_el[3];
+ break;
+ case 1:
+ case 0:
+ default:
+ ttbr = env->cp15.ttbr0_el[1];
+ }
+ } else {
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
+ }
epd = extract32(env->cp15.c2_control, 7, 1);
tsz = t0sz;
@@ -4750,7 +4776,7 @@ static int get_phys_addr_lpae(CPUARMState *env, target_ulong address,
granule_sz = 11;
}
} else {
- ttbr = env->cp15.ttbr1_el1;
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
epd = extract32(env->cp15.c2_control, 23, 1);
tsz = t1sz;
--
1.8.3.2
next prev parent reply other threads:[~2014-10-31 15:27 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-30 21:28 [Qemu-devel] [PATCH v8 00/27] target-arm: add Security Extensions for CPUs Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 01/27] target-arm: extend async excp masking Greg Bellows
2014-10-31 19:00 ` Peter Maydell
2014-11-05 21:12 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 02/27] target-arm: add async excp target_el function Greg Bellows
2014-10-31 11:56 ` Peter Maydell
2014-10-31 14:14 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 03/27] target-arm: add banked register accessors Greg Bellows
2014-10-31 16:50 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 04/27] target-arm: add non-secure Translation Block flag Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 05/27] target-arm: add CPREG secure state support Greg Bellows
2014-10-31 12:15 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 06/27] target-arm: add secure state bit to CPREG hash Greg Bellows
2014-10-31 12:28 ` Peter Maydell
2014-10-31 12:31 ` Peter Maydell
2014-10-31 16:20 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 07/27] target-arm: insert AArch32 cpregs twice into hashtable Greg Bellows
2014-10-31 12:44 ` Peter Maydell
2014-10-31 19:01 ` Greg Bellows
2014-11-04 22:20 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 08/27] target-arm: move AArch32 SCR into security reglist Greg Bellows
2014-10-31 12:06 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 09/27] target-arm: implement IRQ/FIQ routing to Monitor mode Greg Bellows
2014-10-31 12:01 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 10/27] target-arm: add NSACR register Greg Bellows
2014-10-31 13:24 ` Peter Maydell
2014-10-31 21:09 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 11/27] target-arm: add SDER definition Greg Bellows
2014-10-31 13:30 ` Peter Maydell
2014-10-31 21:17 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 12/27] target-arm: add MVBAR support Greg Bellows
2014-10-31 13:35 ` Peter Maydell
2014-10-31 21:19 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 13/27] target-arm: add SCTLR_EL3 and make SCTLR banked Greg Bellows
2014-10-31 14:07 ` Peter Maydell
2014-10-31 21:51 ` Greg Bellows
2014-10-31 23:26 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 14/27] target-arm: respect SCR.FW, SCR.AW and SCTLR.NMFI Greg Bellows
2014-10-31 14:18 ` Peter Maydell
2014-11-03 14:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 15/27] target-arm: make CSSELR banked Greg Bellows
2014-10-31 14:23 ` Peter Maydell
2014-10-30 21:28 ` Greg Bellows [this message]
2014-10-31 15:04 ` [Qemu-devel] [PATCH v8 16/27] target-arm: add TTBR0_EL3 and make TTBR0/1 banked Peter Maydell
2014-11-04 22:44 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 17/27] target-arm: add TCR_EL3 and make TTBCR banked Greg Bellows
2014-10-31 15:07 ` Peter Maydell
2014-11-04 22:45 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 18/27] target-arm: make c2_mask and c2_base_mask banked Greg Bellows
2014-10-31 15:26 ` Peter Maydell
2014-11-04 22:46 ` Greg Bellows
2014-11-04 23:27 ` Peter Maydell
2014-11-05 15:09 ` Greg Bellows
2014-11-05 15:15 ` Peter Maydell
2014-11-05 15:18 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 19/27] target-arm: make DACR banked Greg Bellows
2014-10-31 15:38 ` Peter Maydell
2014-11-03 21:23 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 20/27] target-arm: make IFSR banked Greg Bellows
2014-10-31 16:18 ` Peter Maydell
2014-11-05 22:19 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 21/27] target-arm: make DFSR banked Greg Bellows
2014-10-31 16:19 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 22/27] target-arm: make IFAR/DFAR banked Greg Bellows
2014-10-31 16:24 ` Peter Maydell
2014-11-03 22:59 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 23/27] target-arm: make PAR banked Greg Bellows
2014-10-31 17:21 ` Peter Maydell
2014-11-03 22:58 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 24/27] target-arm: make VBAR banked Greg Bellows
2014-10-31 17:22 ` Peter Maydell
2014-11-03 22:06 ` Greg Bellows
2014-11-03 22:49 ` Peter Maydell
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 25/27] target-arm: make c13 cp regs banked (FCSEIDR, ...) Greg Bellows
2014-10-31 17:27 ` Peter Maydell
2014-11-03 22:57 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 26/27] target-arm: make MAIR0/1 banked Greg Bellows
2014-10-31 17:31 ` Peter Maydell
2014-11-03 23:00 ` Greg Bellows
2014-11-04 14:13 ` Greg Bellows
2014-10-30 21:28 ` [Qemu-devel] [PATCH v8 27/27] target-arm: add cpu feature EL3 to CPUs with Security Extensions Greg Bellows
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414704538-17103-17-git-send-email-greg.bellows@linaro.org \
--to=greg.bellows@linaro.org \
--cc=aggelerf@ethz.ch \
--cc=edgar.iglesias@gmail.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=serge.fdrv@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).